MyLink Information for Developers
7 Attachment(s)
GM has opened the doors for third-party developers to create apps for MyLink.
For anyone who's interested in developing MyLink Apps (or any other reason you might want access to the core MyLink files cough*jailbreak MyLink*cough) here is where you can sign up for a free developer account: https://developer.gm.com/index.php I will be adding items to this list as I learn about them. Until then, this is all I've got. Link to QNX (Company that created and owns the software behind MyLink): http://www.qnx.com/products/qnxcar/#overview Panasonic Links:
Attachment 550906 Attachment 550899 Attachment 550900 Attachment 550901 Attachment 550902 Attachment 550903 Attachment 550904 How to Update Your MyLink Radio for New Apps The BringGo/TuneIn/Siri Eyes Free bundle software update is an interim 2013MY production upgrade on 2013 Sonic and Spark models equipped with MyLink. Sonic, Spark and Trax models with MyLink built before the production upgrade can be upgraded at the dealership. Programming Information Refer to #PI0914 for complete information about programming the MyLink radio with the new calibration. In addition to the new BringGo/TuneIn/Siri Eyes Free bundle software update, it also addresses several MyLink radio conditions regarding a Service Rear Camera message, FM or XM radio station default, XM operation, and inoperative Bluetooth functions. Programming Instructions The latest calibrations for the radio are available on TIS2Web. Reprogram the radio following the Service Programming System (SPS) procedures in the appropriate Service Information. Next, update the radio again, this time using a USB flash drive. It requires a USB 2.0 flash drive with a minimum capacity of 4 GB. In TIS2Web, select A11 Radio USB File Transfer – Programming from the Supported Controllers screen. Any existing data on the USB flash drive will be erased during the TIS2Web-to-USB flash drive download process. Once the software is downloaded to the USB, do not add any data to the flash drive. The USB 2.0 flash drive should be a known good device with a light to confirm the device is reading/writing when attempting to access. After all the files are downloaded to the USB flash drive, eject the device from the computer and insert the USB flash drive in the radio USB port. TIP: If the message “The following update file is invalid SMD file” is displayed, follow the steps in #PI0914 to change the date and time to continue programming. When the update info screen appears, select Update. (Fig. 5) The USB 2.0 flash drive must be installed into the vehicle before selecting “Update Info.” Do not remove the USB flash drive while the update is in progress. Once the USB programming has been completed successfully and all the steps in the programming procedure are completed, verify that there are two new icons (BringGo and TuneIn) displayed on the smartphone link screen. __MyLink Version History 23182567._______.E0.E0.14.50 23121110._______.E0.0D.0D.0D [I don't have this version in my version history] 22992942._______.E0.0D.0D.0D [I don't have this version in my version history] 22768311._______.E0.E0.14.51 (also seen E0.0D.0D.0D and E0.0D.0D.0B) 22768303._______.E0.E0.14.51 (also seen E0.0D.0D.0D and E0.0D.0D.0B) 22768304._______.E0.E0.14.51 (also seen E0.0D.0D.0D and E0.0D.0D.0B) 22768305._______.E0.E0.14.51 (also seen E0.0D.0D.0D and E0.0D.0D.0B) 22768306._______.E0.E0.14.51 (also seen E0.0D.0D.0D and E0.0D.0D.0B) 22768307._______.E0.E0.14.51 22768308._______.E0.E0.14.51 22768309._______.E0.E0.14.51 22768310._______.E0.E0.14.51 77777777._______.E0.00.41.55 22950148._______.C4.0E.14.81 50000001._______.C4.0E.14.91 23164544._______.00.01.25.13 23111189._______.10.0E.06.31 23164647._______.30.5E.04.24 |
Awesome news. I'll see if my Dad would be interested.
|
Updated the OP with a link to the company that created the firmware and software for MyLink:
http://www.qnx.com/products/qnxcar/#overview |
Problem is...we need a way to upgrade through USB ourselves...not the ****in dealer.
|
Quote:
|
Fun fact:
With the new MyLink (if you have a iPhone 4S or iPhone 5), holding down the "talk" button on your steering wheel activates Siri |
where can we go to see if our MyLink has updates available?
|
Quote:
|
Quote:
You can always contact Infotainment at (855) 478-7767 for all questions and concerns you may have about your MyLink. Regards, Jennifer T. (Assisting William) Chevrolet Customer Care |
MyLink Information for Developers
Wanted to let people know that the current MyLink version has red light cameras as a POI
http://i1093.photobucket.com/albums/...ps745c6ca7.jpg |
What version do you have?
|
Can any mylink system upgrade to that new navigation? Or is there a seperate mylink version that has nav? The only navigation I am able to use is through onstar.
|
Quote:
|
Quote:
|
I just put my wife into a 2013 equinox with mylink. It doesn't have navigation or anything like that, but would these apps still be available for that unit? I'm unsure what firmware it is running. I could always run out and look.
|
Quote:
Can you post what version you're running? |
Quote:
Sent from my 2SS/RS |
Quote:
|
Quote:
|
Quote:
|
MyLink Information for Developers
Quote:
Sent from my 2SS/RS |
MyLink Information for Developers
Quote:
Sent from my 2SS/RS |
Siri not a hook up yet....
|
Quote:
Also - Siri isn't an option on its own either, I think it's just integrated into the Bluetooth. |
MyLink Information for Developers
Quote:
Thanks! Sent from my 2SS/RS |
Quote:
|
Quote:
|
1 Attachment(s)
So......I can't get the camera POI back. Even if I enable all of them they aren't showing up anymore. Dammit.
I also have a new icon on my home screen. Text messages. Going to have to pull the log files to see if an update was pushed to the car. Attachment 552419 |
Quote:
I went to config/radio settings/software versions menu. I have a couple of things here, one of which is a "update radio software" option. http://img.tapatalk.com/d/13/09/02/byryruse.jpg There is a bunch more, I didn't want to post a picture of all of them it seemed like a lot of scrolling. What more http://img.tapatalk.com/d/13/09/02/ybu8uhaj.jpg |
Quote:
|
Quote:
And I don't have "security cameras" as a POI option. |
Just wanted to update, I went out to my wife's car with my neighbors iPhone 4S. I synced the Bluetooth and tried to get Siri to come up with the steering wheel controls. I pressed and held the talk button and nothing happened. However if I press and hold the home button to make Siri come up like normal on the iPhone, the audio transfers to the car.
In my camaro, I don't have the MYLINK, and in order to get access to my iPhone 4 phone book, I need to press the button on the steering wheel and when the prompt says "Ready" I need to say "Voice". Then after it will say "Ok Voice...Accessing IPhone". Then I hear the voice command beep and I can say whoever I want to call. Sorry to steer in the wrong direction briefly, I am curious if anyone with a non MYLINK has to do the same thing in their camaro. |
Quote:
Sent from my 2SS/RS |
Quote:
|
Quote:
Sent from my 2SS/RS |
Quote:
|
Pics of my MyLink
http://i1093.photobucket.com/albums/...a.jpg~original I'm going to make a list of the version numbers in the OP - not to worry guys. http://i1093.photobucket.com/albums/...d.jpg~original http://i1093.photobucket.com/albums/...5.jpg~original http://i1093.photobucket.com/albums/...a.jpg~original http://i1093.photobucket.com/albums/...a.jpg~original http://i1093.photobucket.com/albums/...a.jpg~original |
Just discovered that the entire MyLink software is done through various Open Source projects - which means, somewhere on the Internets, is a directory of the MyLink firmware/software versions.
|
Quote:
|
I'd be surprised if these guys aren't in someway involved and may shed some light on things.. http://qnxauto.blogspot.com/search/label/GM%20MyLink
|
All times are GMT -5. The time now is 02:40 AM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.