Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Member Car Journals (https://www.camaro5.com/forums/forumdisplay.php?f=50)
-   -   Cody's Rally Yellow 2010 Camaro 2SS/RS M6 (https://www.camaro5.com/forums/showthread.php?t=332853)

cody.freeman1 12-16-2013 07:14 AM

Cody's Rally Yellow 2010 Camaro 2SS/RS M6
 
Received my 2010 Camaro 2SS/RS M6 in August 2011, it was completely stock.


Most Recent Pictures

http://www.camaro5.com/forums/pictur...ctureid=129964

http://www.camaro5.com/forums/pictur...ctureid=115211

http://www.camaro5.com/forums/pictur...ctureid=115212


The Yigo International Raceway in Guam

http://www.camaro5.com/forums/pictur...ctureid=115207

Current Engine Bay Picture

http://www.camaro5.com/forums/pictur...ctureid=128623

Picture of Engine Bay before the Supercharger

http://www.camaro5.com/forums/pictur...ctureid=128622

Picture of Engine Bay with Engine Cover before the Supercharger

http://www.camaro5.com/forums/pictur...ctureid=115215


Performance:

Magnuson TVS2300 with 3.6" Pulley, 1:1 Cog Drive, and RDS Spacer
2" Stainless Works Headers / Cat Delete / 3" Stainless Works Retro Chambered Catback
Cold Air Inductions Intake with ADM Scoop
ZL1 Fuel Pump
ADM FPCM
VMAX Ported Throttle Body
DSS 1 Piece Aluminum Driveshaft
RX Oil Catch Can
RX PCV Breather
SJM Line Lock
Goodridge Stainless Braided Brake Lines
Tick Stainless Braided Clutch Line
Ideal Garage Clutch Master Cylinder
Lingenfelter Clutch Pedal Return Spring
GTO Separate Clutch Reservoir
MGW Short Throw Shifter
Hawk Ceramic Brake Pads
JRE 91 Octane Tuned


Appearance:

Hex Vents
Havoc Rear Diffuser
Anvil Spoiler
Technostalgia Tail Lights
RPI Front Splash Guards
ZL1 Rear Splash Guards
Showstoppers Side Markers
AAC Reverse Lights
AAC Aqua Blue Dome-Trunk-Footwell Lights
18" TSW Nurburgring Wheels / Front-Nitto NT555 Rear-NT05R
AEM AFR Gauge
AEM Boost Gauge
Ceramic Window Tint / 35% Driver-Passenger-Rear / 75% Front


Fluids:

Amsoil Motor Oil and Oil Filter / Oil Filter Magnet and Magnetic Drain Plug
Royal Purple Transmission Fluid
Royal Purple Differential Fluid
GM 50/50 Coolant
Redline Power Steering Fluid
Ate Blue DOT 4 Clutch Fluid
Ate Blue DOT 4 Brake Fluid



Hex Vents

http://www.camaro5.com/forums/pictur...ctureid=115214



The Driveshaft Shop 1 Piece Aluminum Driveshaft

http://www.camaro5.com/forums/pictur...ctureid=115209



VMAX CNC Ported Throttle Body

http://www.camaro5.com/forums/pictur...ctureid=115206



MGW Short Throw Shifter

http://www.camaro5.com/forums/pictur...ctureid=115208

SJM Line Lock

http://www.camaro5.com/forums/pictur...ctureid=129969

Stainless Braided Brake Lines

http://www.camaro5.com/forums/pictur...ctureid=129966

Old VS New

http://www.camaro5.com/forums/pictur...ctureid=129965
http://www.camaro5.com/forums/pictur...ctureid=129967

ADM Fuel Pump Control Module

http://www.camaro5.com/forums/pictur...ctureid=128612

TSW Nurburgring Wheels with Lightweight Aluminum Lug Nuts

http://www.camaro5.com/forums/pictur...ctureid=115217

Interior

http://www.camaro5.com/forums/pictur...ctureid=128621

The Supercharger and its components before we began the installation

http://www.camaro5.com/forums/pictur...ctureid=128615

Supercharger Installation

http://www.camaro5.com/forums/pictur...ctureid=128614

Supercharger Installation

http://www.camaro5.com/forums/pictur...ctureid=128617

Supercharger Installation

http://www.camaro5.com/forums/pictur...ctureid=128620

Supercharger Installation with Stephen and I (The Supercharger Install Crew)

http://www.camaro5.com/forums/pictur...ctureid=128618

Supercharger Installation with a very tired me haha

http://www.camaro5.com/forums/pictur...ctureid=128619

Supercharger Installation

http://www.camaro5.com/forums/pictur...ctureid=128613

Tuning Datalogs for Ted Jannetty on SCT after Supercharger Installation

http://www.camaro5.com/forums/pictur...ctureid=128616

Kartashian 12-16-2013 07:31 AM

Pictures pictures :popcorn::popcorn:

cody.freeman1 12-19-2013 10:20 PM

Updated the build thread. Looking forward to some more installs starting in February after the interior gets painted in January.

DwRed1LTV6 12-20-2013 09:04 AM

Nice looking SS :thumbup:


More Mods :lol:

Vengeance Graphix 12-20-2013 04:04 PM

great looking SS

cody.freeman1 03-03-2014 07:13 PM

Maggie bought with COG Drive, pending install in the coming month or two....

cody.freeman1 11-29-2014 09:54 PM

I apologize for not updating my build thread in over half a year. It's now updated with the supercharger install done in May 2014.

CruisingSpeed 11-30-2014 12:38 AM

Looks damn good. Don't know why I haven't seen this before on the forums. Btw I'm just curious. Is it a dd? Do you take it out when it's raining or such? I ask because it looks like those hex vents are open to the engine bay without a drain? Do you have any problems with it like that? Thanks

Squishy 11-30-2014 08:40 AM

Hey cody, Do they still make those autobots steering wheel decals anywhere? ive been looking for one for ever now! Cars looking great by the way! keep us updated.

cody.freeman1 12-24-2014 11:54 PM

Quote:

Originally Posted by CruisingSpeed (Post 8088394)
Looks damn good. Don't know why I haven't seen this before on the forums. Btw I'm just curious. Is it a dd? Do you take it out when it's raining or such? I ask because it looks like those hex vents are open to the engine bay without a drain? Do you have any problems with it like that? Thanks

Thank you! Yes, this is "somewhat" of a Daily Driver. I drive the car about 2-3 days a week on the US Territory island of Guam where it rains everyday.....ranges from 2 minutes to 25 minutes haha. Yes, I purposely kept the drainage off of the vents because water doesn't hurt anything in the engine bay from the opening of the hex vents, it just helps to further cool off the Maggie.

Quote:

Originally Posted by Squishy (Post 8088613)
Hey cody, Do they still make those autobots steering wheel decals anywhere? ive been looking for one for ever now! Cars looking great by the way! keep us updated.

Thanks! Sadly the company (forgot the name) stopped making the Autobot steering wheel decal because their machine/printer they used to make them broke and it wasn't profitable enough for them to fix it. I purchased it back in late 2011.

Brandon@HPE 01-03-2015 04:53 PM

That's amazing!


Sent from my iPhone using Tapatalk

Andy-AMSOIL 01-04-2015 08:03 PM

Drive shaft looks much better than stock no doubt

Behic2320 01-05-2015 12:12 PM

Great looking build boss man

Victory_Lola 01-05-2015 12:49 PM

I loveeeee how aggressive it looks :love: where did you get the spoiler?


All times are GMT -5. The time now is 11:25 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.