I WANT TO INSTALL A MILD CAM SHAFT, ANY REFRRALS???
I have the LS3, m6 looking to get a cam shaft installed ASAP. Anyone done it yet or know anyone that has done one in the So Cal area? Prices?
|
Can you be more specific?
a cam shaft? a video camera? |
Just a basic cam shaft, nothing major just to push out a little hore HP and of course give me that SOUND:headbang:
|
Hopefully a mod will move this but you would have better luck in your regional forum or the V8 forum finding some help. I too am researching cams there are some posts now with info an ADM has two advertised cams stage one and stage two. They have responded quickly to my questions. http://www.admperformance.com/index....id=5&Itemid=38 I would suggest the stage one for what you asked for.
|
Quote:
|
Quote:
|
Quote:
|
I don't know much about smog stuff just CA is crazy with rules and regs. As far as dealer and cams gotta find right one and ask quesitons. If they had a GMPP cam it would be what your looing for, mild upgrade and it would be gmpp approved, but they don't offer one right now. I've even read a gmpp cam would affect warranty, I am no expert and I don't want this to fill up with a warranty fight. i would go to your dealer or find a dealer and ask them about warrantys and cams and see what they say. Ask around other people you know have sports cars or tuned cars and see if they reccomend anyone.
|
find a good corvette performance shop in your area...they will be able to help you...
see what is popular among the corvette guys...they have a 3 year head start |
Quote:
|
JBA in San Diego will do it. Expect HEAVY labor charges if you are not going to do it yourself. Sure the cam may cost $400, but the install will be $1500+.
You will also need a tune to get any power out of it, otherwise the car will most likely just run funny. They do not have the flash software now, but if you have your own, like HP Tuners, they will tune it on their dyno. This kind of work will definitely "void" the warranty. Any engine/powertrain problems will likely be on you. That being said, I cant wait to get down there and do it. (3 weeks :( ) |
I second JBA, they are very cool over there. They work on anything from desert trucks to dragsters.
There is also a place in Mira Mesa (If you are familiar with the San Diego area) but the name slips my mind. |
Quote:
|
All times are GMT -5. The time now is 04:12 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.