Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)

- 5th Gen Camaro SS LS LT General Discussions (https://www.camaro5.com/forums/forumdisplay.php?f=2)

- - Viper Responder 350 (https://www.camaro5.com/forums/showthread.php?t=37082)

bilydean

08-12-2009 04:31 PM

Viper Responder 350

Has anyone installed the Viper Responder 350 Alarm in their car and done it themselves? If so, can you share how you did it? What wire did you tie into etc.

thanks
Dean

steveo17

08-12-2009 05:05 PM

waste of my imo. the only way to do an alarm is doing a 2 way alarm

patriotpa

08-12-2009 05:10 PM

Remember...the wiring harness gets cut into to install that alarm.

bilydean

08-12-2009 06:45 PM

Quote:

Originally Posted by steveo17 (Post 791394)

waste of my imo. the only way to do an alarm is doing a 2 way alarm

This is a two way alarm.

bilydean

08-12-2009 07:09 PM

Quote:

Originally Posted by patriotpa (Post 791407)

Remember...the wiring harness gets cut into to install that alarm.

that is what is making me a little nervous and want to make sure and do it right. I was hoping someone before me has done it and could pass along a little info.

Dean

mikel441

08-12-2009 07:38 PM

Don't waste your time installing an alarm. If a car thief wants it they will get it. Use the money somewhere else. Trust me I used to work for a car alarm manufacture and installed tons of them. Neat toy but, wont keep the pros out.

bilydean

08-13-2009 07:50 PM

So, has anyone actually installed this?

Dean

patriotpa

08-13-2009 08:13 PM

Just add a tilt sensor to the factory alarm. That's all you need, and it can be wired in without butchering your wiring harness.

caverman

08-13-2009 08:39 PM

Quote:

Originally Posted by patriotpa (Post 796255)

Just add a tilt sensor to the factory alarm. That's all you need, and it can be wired in without butchering your wiring harness.

Anyone have more info or link for a tilt sensor that can be added to the factory alarm?

patriotpa

08-13-2009 08:48 PM

http://www.amazon.com/Install-Essent...0214503&sr=8-1

bilydean

08-13-2009 09:12 PM

Quote:

Originally Posted by patriotpa (Post 796255)

Just add a tilt sensor to the factory alarm. That's all you need, and it can be wired in without butchering your wiring harness.

Help me out. Where do you hook it up to?

Thanks
Dean

patriotpa

08-14-2009 05:53 AM

Connect it in parallel with your trunk light switch. That's how I'm doing mine.

All times are GMT -5. The time now is 08:32 PM.