Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)

- V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) (https://www.camaro5.com/forums/forumdisplay.php?f=76)

- - Barton Short throw install (https://www.camaro5.com/forums/showthread.php?t=166188)

c-dub

08-19-2011 02:35 PM

Barton Short throw install

I got a short throw shifter made by Barton industries from a forum member. Said member failed to include the instructions in the box, does anybody have the instructions or access to a good DIY to get this install done? Thanks in advance for any help the wonderful forum peeps can give me :):drinking:

gahammerle

08-19-2011 02:49 PM

I have the instructions. I'll try scanning them in later tonight and post them up.

c-dub

08-21-2011 06:06 AM

No luck with the scanner? :(

Sent from my DROIDX using Tapatalk

pdesanctis

08-21-2011 10:03 AM

Try this. http://www.planetlsx.com/tech/How_To..._Camaro_SS/133

Quote:

NOTE: Steps 1-5 and Steps 8-9 are required for nearly every Camaro aftermarket shifter, not just the MGW unit.

Videos: http://mgwltd.com/camaro2010_short_t...allation.shtml

c-dub

08-21-2011 02:13 PM

Lol those are for mgw?

Sent from my DROIDX using Tapatalk

pdesanctis

08-21-2011 08:36 PM

Same concept.

c-dub

08-22-2011 09:14 AM

Thanks :)

gahammerle

08-22-2011 11:57 AM

It seems my scanner isn't very good. I tried scanning the directions, but I couldn't read the scanned image. Sorry. :(

Ghost-Rider

08-22-2011 12:08 PM

Or you could use the Hurst instructions: http://hurst-shifters.com/hurst-prod...et-Camaro-2010

since Barton pretty much copied Hurst's design from the pivot down.

All times are GMT -5. The time now is 06:54 PM.