Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Suspension / Brakes / Chassis (https://www.camaro5.com/forums/forumdisplay.php?f=93)
-   -   A sneak peak at our newly designed BMR rear lower control arms! (https://www.camaro5.com/forums/showthread.php?t=328935)

BMR Sales 11-19-2013 04:14 PM

A sneak peak at our newly designed BMR rear lower control arms!
 
5 Attachment(s)
The is our newly designed BMR non-adjustable lower control that will replace our current version and will take over as part number TCA028. These non-adjustable lower control arms will work with the 2010 to current Camaros and can be used with the earlier style rear sway bars or the FE4 style rear sway bars. Our current BMR adjustable lower control arms (TCA029) will see the same changes and keep the TCA029 part number. We are thinking that this change in design for our TCA028 and TCA029 BMR lower control arms will become active within the next 3-4 weeks. If you guys have any question or inquiries let me know.

Now for the good stuff, here is some pictures of the new style lower control arm.

shibbs 11-19-2013 05:47 PM

Why the design change?

blazzin1 11-19-2013 05:59 PM

Quote:

Originally Posted by shibbs (Post 7200290)
Why the design change?

To accomodate the newer FE4+ suspensions on the 2012+ camaros.

Bo White 11-19-2013 06:33 PM

Powder coat those black and send em my way and I'll test fit and give a review.

ddck24 11-19-2013 06:33 PM

Are there big advantages in the extreme anti roll bar setup vs the new^^^^ 2012+ stock setup????
A little street, mostly drag racing

smokum 11-19-2013 06:39 PM

The way its notched will this fit a 15 inch wheel?

PAUL SS 11-19-2013 06:54 PM

Not for 2010 or 2011's? Or would I need new sways and end links?

grocerygetter 11-19-2013 08:03 PM

So on lowered car the adjustable could get camber back to 0 or a hair positive for drag racing launches?

blazzin1 11-19-2013 08:27 PM

Quote:

Originally Posted by ddck24 (Post 7200416)
Are there big advantages in the extreme anti roll bar setup vs the new^^^^ 2012+ stock setup????
A little street, mostly drag racing

The "Xtreme" anti-roll bar is more geared towards drag racing vs. the FE4 suspension. If you are more serious about drag racing, you'd probably be better off with the Xtreme.

Quote:

Originally Posted by smokum (Post 7200436)
The way its notched will this fit a 15 inch wheel?

They will fit 17's, but not 15's. Need the BMR Drag Race Conversion for that.

Quote:

Originally Posted by PAUL SS (Post 7200504)
Not for 2010 or 2011's? Or would I need new sways and end links?

These will fit both styles of suspensions.

Quote:

Originally Posted by grocerygetter (Post 7200719)
So on lowered car the adjustable could get camber back to 0 or a hair positive for drag racing launches?

Yep!!!

ddck24 11-19-2013 09:29 PM

Blazzin you're a fountain of knowledge!! Lol
Appreciate ya!! Bmr and weld need to put ya on the payroll!

blazzin1 11-19-2013 09:32 PM

Quote:

Originally Posted by ddck24 (Post 7200970)
Blazzin you're a fountain of knowledge!! Lol
Appreciate ya!! Bmr and weld need to put ya on the payroll!

Hahahaha!!! Thanks!!! If you only knew how close to reality that statement really was......!!!!! (Sorry, inside joke!!!).

BMR Sales 11-20-2013 08:37 AM

Quote:

Originally Posted by grocerygetter (Post 7200719)
So on lowered car the adjustable could get camber back to 0 or a hair positive for drag racing launches?

Is your car lowered at all? Actually our non-adjustable lower control arms (TCA028) are a little shorter than the factory lower control arms so if you are lowered a little and looking to get to 0 camber or maybe even a little positive you could do it with our more affordable non-adjustable lower control arms (TCA028).

Quote:

Originally Posted by ddck24 (Post 7200970)
Blazzin you're a fountain of knowledge!! Lol
Appreciate ya!! Bmr and weld need to put ya on the payroll!

Blazzin1 is definitely a good guy for us and we appreciate him choosing BMR for his suspension and chassis needs! :happy0180:

Camper 11-20-2013 10:31 AM

so thats why none of my bolts fit on my 15" conversion.. may i make the suggestion that you fit everything with it painted, so we dont have to die grind everything..

BMR Sales 11-20-2013 10:51 AM

Quote:

Originally Posted by Camper (Post 7201955)
so thats why none of my bolts fit on my 15" conversion.. may i make the suggestion that you fit everything with it painted, so we dont have to die grind everything..

What parts did you have issues getting the bolts through?

All of our plates are CNC lasered so there shouldn't be any issues with bolt fitment. The only time we ever have had a bolt fitment issue with that kit is with the upper coil-over mount. Sometimes the welder will take it off the jig too soon and the sleeves that the bolts run through will tweak just a hair making it a little bit of a pain to get the bolt in. If you have any problems with any of our stuff all you have to do is give us a call and we would be more than happy to help you out. It is hard for us to fix an issue if we don't even know that a issue exist.


All times are GMT -5. The time now is 04:12 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.