Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Camaro Photos | Spyshots | Video | Media Gallery (https://www.camaro5.com/forums/forumdisplay.php?f=3)
-   -   Just started my Engine cover LED project! (https://www.camaro5.com/forums/showthread.php?t=358103)

A_DILLA 05-12-2014 09:44 PM

Just started my Engine cover LED project!
 
7 Attachment(s)
so ,Just started on my project and as you can see to me It's amazing I love It, it definitely gave me more ideas with more lights to come now that I've learned how to make the connection work. it took awhile for me to figure out what goes to what watched a lot of YouTube videos and then finally figured it out as you can see in the pictures. BUT just when I thought that I was just about done the unthinkable happens and yes I cut the wire so I had to re make the connections in order for them to go ahead and light up. One side did not want to light up anymore but if anything that's okay for me because now I have a disconnection anytime I would like to go ahead and remove the cover and wash it other than that enjoy :thumbsup:

Forcer 05-12-2014 09:59 PM

Looks great!!! I wana do this to my engine bay, but I need really really bright RGB ones so I can plug it into my halo control box.

A_DILLA 05-12-2014 10:05 PM

Quote:

Originally Posted by Forcer (Post 7659403)
Looks great!!! I wana do this to my engine bay, but I need really really bright RGB ones so I can plug it into my halo control box.

That's gonna look awesome bro. These LED's were from orileys auto parts. . Like $20 but they are pretty bright.. gonna go back for more lights

Candr3535 05-12-2014 10:19 PM

Looks great bro. Wish you lived closer to New Jersey, could you so helpp

A_DILLA 05-12-2014 10:28 PM

Quote:

Originally Posted by Candr3535 (Post 7659448)
Looks great bro. Wish you lived closer to New Jersey, could you so helpp

Ya bro straight up lol.. i connected the power source to my ZL1 foglights because there is a fuse there. And the two positive wires from the LED to the middle prong and both negative to a separate negative wire I used and put that to the 3rd prong which is for ground and BAM we have light :thumbsup:

Mike C 05-13-2014 06:27 AM

That looks Cool! Great Job!

viper1cobra 05-13-2014 06:33 AM

Great lighting effect for the engine compartment. :hail: Looks better coming from under your see thru engine cover.:thumbsup:

A_DILLA 05-13-2014 02:08 PM

Thx guys

BLU DUCE 05-13-2014 02:42 PM

Spike III Build
 
Quote:

Originally Posted by A_DILLA (Post 7660911)
Thx guys

Hot Dam Holy Crap That is just killer looking. I haven't put lights under hood yet. But when I do the blue is the color I'll be using. My trunk- foot well -dome & license plate lights are all led Blue.:clap: :clap2: :thumbsup:

Dznts 05-13-2014 04:34 PM

great work

A_DILLA 05-13-2014 04:39 PM

Quote:

Originally Posted by Dznts (Post 7661324)
great work

Thank you sir! Much appreciated

A_DILLA 05-13-2014 04:42 PM

1 Attachment(s)
Quote:

Originally Posted by spike III (Post 7661002)
Hot Dam Holy Crap That is just killer looking. I haven't put lights under hood yet. But when I do the blue is the color I'll be using. My trunk- foot well -dome & license plate lights are all led Blue.:clap: :clap2: :thumbsup:

Lol thx spike III.. it was between blue and red. I am getting the blue devil eyes also. Someone at our car show said "Alen you can't do red eyes those are not Autobots colors" lol I was dam it... i forgot that's decepticon red eyes. So i went with blue LED's to match everything else that will be done. I'm going to make my lights look exactly like this is done here in the picture below. Yours is gonna look amazing. Make sure to post pictures. :w00t:
.

laditee 05-13-2014 05:02 PM

Very nice:w00t:

A_DILLA 05-13-2014 07:30 PM

Quote:

Originally Posted by laditee (Post 7661407)
Very nice:w00t:

Thank you very much...


All times are GMT -5. The time now is 03:42 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.