zl1 full build
 

built shortblock, stock crank, H beams, Wisco 11cc dish coated skirts
Heads are PRC cnc'd LS3 castings... 350 cfm
CBI street cars custom grind
TSP headers
stock zl1 catback (because it is awseome...)
meth with #10 jet for now..
fully ported blower
NW 102
squash duel pump fuel system.
LPE cold air
Coan 3000 rpm stall
10% LPE lower pulley, 2.38 upper pulley the car is making a solid 15.5 pounds of boost according to HP tuner log...
blower speed is at maximum safe level 25,000 rpm at 6500 rpm..
comanded shift points are being kept to 6300 and 6400 rpm.
weld 20" rts wheels 10.5 rear and 7" in front.
M/T 305 20s in back and 235 Perellis in front.


the car is going up to get some testing done maybe as early as this weekend. It finally feels fast.. the car has never really felt fast to me, which I contribute to the weight and the very stable chassis.. Now it feels fast..

http://www.youtube.com/watch?v=fVZHqIUO5D4

:pop2: Sounds interesting!!

im planning on going for the zl1 record...

awesome build. car is nasty!

Hell Yeeaaahhhh :headbang: now that's how all ZL1's should sound, I love it

there is a girl in my area that has a zl1 , shes a model. just now getting into drag racing . she got a mec. gullwing too that she has been racing . but got a zl1 she ran a 10.6 her first time out. but her family dont want to go any faster till she gets use to it more. so u should have some competition when she turns it up. but thats what the zl1 should be like .
nice car btw.

lol what

What record?

I wish you were near by for a ride along!

i think he is referring to the rick from livernois 9.8 sec car which is sitting in the number one spot on the ZL1 list.

Yes..

Sounds like a neat ride:w00t: What compression ratio are you using? I think your blower will be spinning more like 22,500 at 6500 engine rpm unless my math is wrong.

Your math is wrong at least according to all the pulkey charts.. if it was a 2.55 maybe. But its a 2.38. With the 11 cc dish its about 10.1

http://weaponxmotorsports.myshopify....ng-mods-needed

This chart is one of a couple out there.. I have a 9.10 lower and a 2.38 upper..

The motor made 15#s with just the upper before. I was thinking it was going to be about 17 but I guess the new heads and cam are flowing some air.