Wanted: DIY & HOW TO's pics and step-by-step instructions
Ok you guys, I have a task for all of you.
Any modifications you are doing, or any servicing you are doing. be it: oil change, rear fluid change, wheel changes, CAI swaps, exhaust swaps, halo swaps, decal applications, anything and everything you guys are doing to these cars. I want pics and step by step instructions of what you are doing. I am wanting to build a HOW-TO: Everything. for our fellow members. and I need your help. take as many pics as you can, point out specific things that you encounter. hang ups, etc. like the issues with the skip shift eliminators being installed on the wrong harness. anything and everything guys. :thumbsup: :respekt::respekt::respekt: :respekt::respekt::respekt: |
this will ben extremely helpfull, great idea!
|
There is quite a bit of that already on these threads. Just scan through them and transfer them to this thread if your willing...good luck. You would need a list of the mods posted in your first post with the post # so that we wouldn't have to go through all of the pages to find what we want... IMO.
|
Good idea if you can get cooperation. This will be extremely useful.
|
Quote:
Here's a sticky from Toyotanation for my Camry. I've used it on many occasions for ideas and such on my other car. http://www.toyotanation.com/forum/sh...d.php?t=220549 I took a few other pictures from my blue LED ambient lighting in the dash of the Camaro if you wanted it. There are of course other threads on that though. |
I gave this to Milk:
DIY: SIDE GILL FADE AND OUTLINE INSTALL http://www.camaro5.com/forums/wiki.p...UTLINE+INSTALL ...and sent him pics some time ago. It seems to be popular. |
Quote:
Quote:
Quote:
sweet. I'll check with milk for the pics. thanks! here's another one that is a great write up http://www.camaro5.com/forums/showthread.php?t=43505 |
Do you want this posted here, or just a link to where it is?
|
start a new thread and add the link to it in here.
|
Here's my write up on Pfadt spring installation. http://www.camaro5.com/forums/showthread.php?t=56127
|
|
Here's my write-up on installing a no-drill front license plate holder.
http://www.camaro5.com/forums/showpo...8&postcount=16 |
Also, if you guys could.... try and list your pictures with the step that the correspond to. and try and put everything in one post or multiple posts. I know sometimes others jump in and post before you can get your full write-up posted (if it takes multiple posts) and if this is the case, PM me and I can re-arrange the posts so that your write-up is sequential.
Thanks. Spike. |
|
All times are GMT -5. The time now is 09:06 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.