2010 Victory Red 1LT/RS Build Thread [Auto-X & DD]
Hey Everyone, this is Lil' Red, my 2010 1LT/RS Victory Red Camaro. It was #645 off the production line. I'm currently 19, and my parents bought me this car when it first came out. My dad also purchased a 2011 Black 1SS/RS a year later. So, shorty after the purchase of this car, she was in a wreck.
http://www.camaro5.com/forums/showthread.php?t=25702 After this was resolved, I began to make her my own. I am now attending the University of Tennessee for nuclear engineering and have recently found an addiction to autocross. I'm running with the ETR group of SCCA for the Spring, but that will probably change when school lets out. Below is a list of my current mods, and upcoming mods. Hope you all enjoy. Table of Contents Custom Engine Cover Project (Pg 1) (Post #3) Autocross Event 7/28/13 (Photo Heavy) (Pg 1) (Post #18) Tail of the Dragon 10/19/13 (Photo Heavy) (Pg 1) (Post #23) Engine Bay Lighting Project (Pg 2) (Post #34) Camaro5 Fest IV 8/1-3/13 (Photo Heavy) (Pg 2) (Post #36) Opening ETR Autocross Event @ Pellissippi State 2/23/14 (Photo Heavy) (Pg 2) (Post #44) ETR Autocross Event #2 @ Pellissippi State 3/9/14 (Pg 2) (Post #48) ETR Autocross Event #3.5 @ Pellissippi State 6/8/14 (Pg 3) (Post #54) Mod List Cosmetic AAC Interior Lighting AAC Engine Bay Lighting ACS Hoodliner ACS T2 Front Splitter Defenderworx Locking Gas Cap DVS Customs Leather Shifter Boot DVS Customs Leather E-Brake Boot Emblempros Black Onyx 3.6L Badges Emblempros Black Onyx Camaro Badges Engine Bay Wire Looms GM Heritage Grille Headlight Armor Light Tint Hurst Tap-Shifters IVS Havoc Custom Console Lid IVS Havoc Custom Seats Lloyd Custom Floormats MnP Rear Fascia Blackout MnP Side Marker Blackout Rider Graphix Hash Marks Rider Graphix Front Fascia Blackout Street Scene Lower Grille w/ Ducts Unrestricted Motorsports Spoiler Vinyl Bowties Vinyl Gill Slits Window Tint 30% Custom Engine Bay Lighting Custom Front Wheel Air Deflectors Custom Painted Intake Manifold Custom Painted Interior Panels Custom Painted Tail Light Bezels Custom Painted Brake Calipers Custom Painted Rims Custom Painted Valve Pan Covers Engine Apex Washer Bottle Relocator Apex Air Scoop Black Ice-Olator CAI Cold Air Intake MRT v2.0 Axle Back Exhaust VMAX Ported Throttle Body Suspension/Wheel BMR 1" Front with 1.2" Rear Drop Springs BMR Rear End Links BMR Rear Sway Bar H&R Wheel Adapters 25mm Pirelli PZero 245/45 20 Square Setup Future Hawk HP Plus Pads New Autocross Numbers TSW Nurburgring Wheels SRP Heel Pad CG-Lock SS Rear Cradle w/ 3.91 Gears DIY: Cradle Bushing Inserts BMR Front Sway Bar with Endlinks Bushing Inserts Koni Orange Struts SS Calipers, R1 Slotted Rotors, Goodrich Braided Lines, Hawk HPS Pads, Better Fluid JDP Brake Ducts MPD1 Smooth Exhaust Panel ******** Rear Access Bowtie Cutout Rear Seat Delete Suspension Upgrades 19"x10" w/ 19"x11" Forgestar CF5V Staggered Setup Autocross Slicks 2014 Front Fascia without RS PKG – 22997719 $343.16 2014 Headlamp without RS PKG - 23187850, 23187851 $261.04 each 2014 Front Fog Lamp – 22830038 $58.14 each 2014 Front Fog Bezel - LH-22829542--RH-22829543 $10.89 each 2014 Upper grille – 22965834 $362.95 Awards BW3 1st Annual "Pedal to the Metal" Car Show (3rd Place) Chuck Garrett's Moderator Choice Award Camaro5 Fest IV DIY Front Wheel Air Deflectors Photo Timeline http://farm6.staticflickr.com/5502/1...1a0e48bf_n.jpg http://farm8.staticflickr.com/7331/1...63e65633_n.jpg http://farm9.staticflickr.com/8028/7...115590db_n.jpg http://farm4.staticflickr.com/3724/1...c01e3dca_n.jpg https://farm8.staticflickr.com/7089/...23a2b413_n.jpg https://farm3.staticflickr.com/2863/...948004f7_n.jpg |
Looks great! Very tasteful not too over done :thumbup:
|
Added my new IVS Havoc interior, ACS T2 splitter and my Unrestricted Motorsports spoiler. Working on a new v6 engine cover, and cleaning up my engine bay.
The Engine Cover Project http://farm8.staticflickr.com/7091/7...26198872_z.jpg http://farm8.staticflickr.com/7093/7...0167d3c1_z.jpg https://farm8.staticflickr.com/7215/...2cb6d470_z.jpg This project has been put off, since we painted and polished most of what it would have covered. Instead I decided to go this route: https://farm8.staticflickr.com/7332/...1f627e16_z.jpg https://farm8.staticflickr.com/7387/...c1b9d2cd_z.jpg |
Looks great ! Love the interior , how much did u get it for ?
|
I bought it from Southern Car Parts. I think it is like a $800-$900 kit, but what happened was a guy ordered the kit, then sold his car before recieving the kit, so Southern Car Parts took the kit back for him and had a one time sale price of $700, and thats the kit I got.
It came with Front and Rear Seats, Center Console, and Door/Dash Trim which I didn't install. |
Engine cover looks very interesting, got a finished product yet
|
Hey man, love the ground effect from the front... It's too damn good!! From where did you get it ?
|
Quote:
The splitter is the ACS T2 splitter. |
i stumbled on your build pics very nice.... love to see your engine cover. i think it would look killer in carbon fiber :w00t:
|
Looking good!
|
I am really digging your setup. Are the rims painted black or powder coated? Where did you get them done at? Also, where did you purchase the front ground effect kit from? Nice looking ride.
|
Quote:
|
Great job so far man looks great I love that spoiler, keep up the good work:w00t:
|
really well done red
|
All times are GMT -5. The time now is 07:49 AM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.