[COTW 9/12/11]: Steeleshark2's Bee Build Thread!!
3 Attachment(s)
I have owned my camaro over a year now and finally decided to start a journal. I have a lot of catching up to do. Lets first start with the arrival home pure stock!!
|
1 Attachment(s)
|
3 Attachment(s)
At the first Camaro Fest, I had MTI Racing install the MTI 6 shooter shifter and Vengeance Racing install the 1st gen Vararam.
|
1 Attachment(s)
Now on the next dyno day at EFI Alchemy, here is what I got in 95 degree heat and high humidity:
|
2 Attachment(s)
I installed the transformers emblem on the Chevrolet symbol and installed the blackout strip on the rear.
|
1 Attachment(s)
Here is the new stance with the Eiback lowering springs.
|
2 Attachment(s)
I have also installed a front and rear viewing car cam.
|
2 Attachment(s)
The power bug hit me so I ordered, installed OBX longtube headers and got a full dyno tune by Doc at EFI Alchemy.
|
10 Attachment(s)
A few weeks ago, my car went into EFI Alchemy for a power transformation. Here, I had got the TSP 231/236 cam, harden pushrods, upgraded springs, Melling oil pump, N Motion timing set, Richmond 4.11 gears, Doug Thorley catback, BMR trailing arms/bushings, BMR differential bearings, RX catch can, and a hose reloction kit. Enjoy the pics provided by EFI Alchemy Jacksonville, Fl.
|
10 Attachment(s)
More pics:
|
10 Attachment(s)
More:
|
10 Attachment(s)
Another set of pics:
|
1st startup idle with the TSP 231/236 cam!!
|
1 Attachment(s)
It is now dyno time!!
|
All times are GMT -5. The time now is 04:04 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.