Strut Tower Brace for 2010
 

Anything out there that doesn't involve additional drilling?




Sent from my iPhone using Tapatalk 2

I had to drill to install my Pfadt brace.

On the 10-early 11 you'll have to drill no matter what. The Hotchkis brace drills in the most inconspicuous places though.

https://fbcdn-sphotos-h-a.akamaihd.n...75177058_n.jpg

We have a full how-to write up on our JDP Facebook page. Feel free to call, PM or email me anytime with questions.

Best regards,

Tyler
888-308-6007

How the heck do you get up in there? Do you have to remove springs and struts???


Sent from my iPhone using Tapatalk 2

Mine had mounting points similar to the Hotchkiss. They installed with riv-nuts and everything was done from the top.

Dexman, really? No need to remove wheels springs etc? I'll have to look up install


Sent from my iPhone using Tapatalk 2

You do have to remove the struts or at least pull them out of the way. Here is the How-to link so you can get an idea.

Best regards,

Tyler
888-308-6007

Mine was different than the Hotchkiss.

Here's what I have:
http://www.camaro5.com/forums/showpo...2&postcount=99

:sad0147: ....Links to bar that is no longer available.....

^^^ Yep, I bought it used here on C5 after Pfadt went under.

Bummer. I hear someone has one in the works now specifically for 2010 with no drilling


Sent from my iPhone using Tapatalk 2