turbonetics install questions, help please..
 

2 questions...

1. the injectors don't seem to want to fit. the seals are too big...whats the solution?

2. the injector clips aren't deep enough, they seem to pull the injector out...

a buddy of mine is doing the install. hes a good mechanic but he mentioned these to me...

any ideas?

no one?? I thought I read of other people having issues with injectors, something with installing injectors/ orings and they thought they wouldn't seat right or something...

There are different size o rings for some injectors. Hear is some info. http://www.camaro5.com/forums/showth...ghlight=id850s

Feel free to email me at customer@turboneticsinc.com with pictures of the clips and seal issue just to confirm you have the proper parts. Typically a small amount of lube on the seal will aid in fitting.

yeah I passed that info on to him - he said he would when he gets to that. I figured I would post up here, just to see if there is a trick to installing them that he might be over looking. can never have too much help :)

Good point, just want to be sure that you have all the correct parts.