Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

- Camaro 1LE Forum (https://www.camaro5.com/forums/forumdisplay.php?f=149)

- - 1LE Suspension Package Part Numbers (https://www.camaro5.com/forums/showthread.php?t=244570)

Quote:

Originally Posted by linkwpc (Post 6488031)

I just did a install of 1LE parts on my 2010. Here is the thread

http://www.camaro5.com/forums/showthread.php?t=291002

Looks great! It makes it much stiffer but overall I think it improves ride quality so much.

Quote:

Originally Posted by nak3dsnake (Post 6488481)

Nope, the only thing that was relocated is the sway bar mount. You do not need LCA's if your not changing shocks.

I'm assuming you mean if I AM only changing shocks?? That's all I want to do it put new 1LE struts on all 4 corners.

Quote:

Originally Posted by 376LS3 (Post 6489469)

I'm assuming you mean if I AM only changing shocks?? That's all I want to do it put new 1LE struts on all 4 corners.

Yes lol. Had a bit of a brain fart there...

Awesome! Thanks for the help man!

Changing to the Z style rear bar delivers a much greater improvement than changing struts and coils.

Quote:

Originally Posted by nak3dsnake (Post 5456453)

Thanks to MS3DALE, I was able to get a hold of the FE6 parts numbers from the 1LE. I know some of you are eager to get your hands on them so I'm going to share. :) I also marked each one to show what packages also use those parts so no one orders something they already have!

Strut Tower Brace (LT, SS, 1LE) - 22756880
Front Wheel Hubs (ZL1, 1LE) (2) - 22924741
Rear Wheel Hubs (ZL1, 1LE) (2) - 22924740
Front Coil Spring (SS, 1LE) (2) - 92245257
Front Strut (1LE) (passenger side) - 22812984
Front Strut (1LE) (drivers side) - 22812985
Front Sway Bar (1LE) - 22812946
Front Sway End Link (SS, ZL1, 1LE) (passenger side) - 22842515
Front Sway End Link (SS, ZL1, 1LE) (drivers side) - 22842516
Rear Shock Mount (1LE) (passenger side upper) - 22922446
Rear Shock Mount (1LE) (driver side upper) - 22922445
Rear Coil Spring (SS, 1LE) (2) - 92195466
Rear Shocks (1LE) (2) - 22812987
Rear Sway Bar (ZL1, 1LE) - 22786260
Rear Sway Bar Endlink (SS, ZL1, 1LE) (2) - 22761221
Rear Lower Control Arm (SS, ZL1, 1LE) (2) - 20942237 (Needed for 2010-2011 cars for sway bar conversion)
Rear Toe Link (ZL1, 1LE) (2) - 22845487

hi bud ! my car is 2010 2LT RS, are these
Front Wheel Hubs (ZL1, 1LE) (2) - 22924741
Rear Wheel Hubs (ZL1, 1LE) (2) - 22924740
must be changed ? why ? thank you

Quote:

Originally Posted by camaro789 (Post 6752734)

hi bud ! my car is 2010 2LT RS, are these
Front Wheel Hubs (ZL1, 1LE) (2) - 22924741
Rear Wheel Hubs (ZL1, 1LE) (2) - 22924740
must be changed ? why ? thank you

They do not "Have" to be replaced but they are better units than the regular OE, can handle increased side loads when on track.

It says something very positive that the 1LE gets the good hubs as OE - durability mods like this can get pretty important in a dual-purpose road course/autocross and street-driven car.

I can get better hubs for my car, but I have to source them myself through FRPP and then do the install. Would have been really nice if it'd already been done for me at zero miles <sigh>

Norm

dose the whole kit direct bolt on ? any modification need ? thanks

Quote:

Originally Posted by sycraft (Post 6752984)

They do not "Have" to be replaced but they are better units than the regular OE, can handle increased side loads when on track.

hi bud, the Front Sway Bar (1LE) - 22812946 includes the Bushings, Clamps,
dose the Rear Sway Bar (ZL1, 1LE) - 22786260 include the Bushings, Clamps too ? do they need to be ordered ? thank you again !

Quote:

Originally Posted by nak3dsnake (Post 5456453)

Front and rear sways come with the clamps and bushings, as far as the "kit", its more of a order what you want type of kit. it all bolts on with no modifications and does work well. you only need the lower rear control arms if you have a 2010 or a 2011.

thank you bud !

Quote:

Originally Posted by sycraft (Post 6758953)

hi bud after install the kit, does a wheel alignment needed ?

Quote:

Originally Posted by sycraft (Post 6758953)