Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Camaro V6 LLT Engine, Exhaust, and Bolt-Ons (https://www.camaro5.com/forums/forumdisplay.php?f=38)
-   -   best electric cut outs for v6 (https://www.camaro5.com/forums/showthread.php?t=208936)

LIM3 03-11-2012 11:01 PM

best electric cut outs for v6
 
just wondering what is the best brand and quality for cut outs.
i have the ark n2 CB if it makes a difference
thanks in advance :D

kenkartasasmita 03-12-2012 02:38 AM

depends on your budget. if below $500 u get buy Qtp, dmh, and etc (i forgot the brands, there's still couple of brands). if not, u can buy noweeds $900something (most ppl in here said this one the best, although its kinda pricey).

Kmorpheus 03-12-2012 08:10 AM

I have heard the same thing, No weeds is the best. QTP would be my next option from there. Just remember if you go cheep on a electric cutout you get what you pay for. I have heard of cutouts not fully closing or opening after just 1 season, and the worst is some will start to rattle if not fully closed. Do you research but keep those two thoughts in mind.

Maniature 03-12-2012 10:20 AM

here is my QTP video enjoy :thumbup:
http://www.youtube.com/watch?feature...&v=e_zWwBga0oQ

kenkartasasmita 03-12-2012 03:13 PM

Quote:

Originally Posted by Kmorpheus (Post 4629787)
I have heard the same thing, No weeds is the best. QTP would be my next option from there. Just remember if you go cheep on a electric cutout you get what you pay for. I have heard of cutouts not fully closing or opening after just 1 season, and the worst is some will start to rattle if not fully closed. Do you research but keep those two thoughts in mind.

wow, i didn't know that.

LIM3 03-12-2012 03:26 PM

That's great to know everyone
Does having the ark system matter with the diameter of the pipe ?
What's the install price like ? Appox

Kmorpheus 03-12-2012 03:30 PM

Depends on who does the wiring. Was quoted 150 to install the cutouts, but another 150 to do the electrical, and the ramaining cost was up to the quality of the cutout. I did not want to have a hole drilled into my interer so I am opting for the Key Fob controller, just need to save up the money as its quite a bit more.

LIM3 03-12-2012 03:33 PM

That's a good idea on the key fob
It's been on my list but I rather save up to have the better quality one do it doesn't fail after 3 months


All times are GMT -5. The time now is 02:07 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.