Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   ZL1 Wheels/Tires (http://www.camaro5.com/forums/forumdisplay.php?f=156)
-   -   Clearance the lower control arms (http://www.camaro5.com/forums/showthread.php?t=304071)

Zanediver 06-25-2013 10:50 PM

Clearance the lower control arms
 
Ok guys,

Who here has ground on their stock LCAs to clearance for the 17x10 welds? Any info, pics, or difficulties would be great as I am considering doing this for now instead of replacing the arms.

Trackman 06-25-2013 11:33 PM

I will be doing the same shortly when I get time. I may actually run the 17x10 and do a few launches to see if they hit. There has been one report that they do not hit on a launch. I think they will but am willing to scuff up my used Welds to find out. I am not aware of a aftermarket ZL1 LCA that will work.

Zanediver 06-26-2013 12:19 AM

The BMR adjustable arms will work, but will also require their sway bar.


All times are GMT -5. The time now is 04:20 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2017, vBulletin Solutions, Inc.