|
Pics from bmr suspension mods
1 Attachment(s)
Been trying to get some pics posted Attachment 681522
|
1 Attachment(s)
|
1 Attachment(s)
|
1 Attachment(s)
|
1 Attachment(s)
|
Great Job! I did the changes too -- but didn't replace the cradle bushings -- just the inserts -- and only had to 'lower' the cradle -- you took yours' out -- that's awesome!
Are you also replacing the upper control arm bushings? A++++ for taking out the cradle! -Don |
thank you yes was a lot of work but well worth was lucky enough to have access to a lift, yes also replaced the upper control arm bushings.
|
Yep, that is the way to go. I didn't need to do the full bushings, but did all the upgrades -- lower control arms (FE4/1LE), BMR Adjustable Toe and Trailing arm/bushings, uppers, 1LE shocks/Struts, sways front and rear, and radius arm inserts.
HUGE difference in the handling -- I didn't have a lift so it was all on jack stands -- still, taking out the cradle is something... Congrats! -Don |
yes your a right on makes a big difference in handling, I needed the full cradle bushings for the bad wheel hop was getting with pushing 750-800 hp.
|
| All times are GMT -5. The time now is 07:54 AM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.