Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

- V8 - Engine, Exhaust, Bolt-Ons, Tuning Equipment (https://www.camaro5.com/forums/forumdisplay.php?f=99)

- - Everything For Sale 2000 miles on all (https://www.camaro5.com/forums/showthread.php?t=216565)

Everything For Sale 2000 miles on all

I'm going to build a Outlaw Drag Radial TT 2012 Camaro,so I will be returning my 2011 SS Camaro to stock and all performance parts are for sale.All the parts are top $$ parts I don't like to break anything so I spend more to have less headaches. Complete TTI twin turbo setup with upgraded 6265 billet ball berring Percision turbos,1000hp intercooler,60lb injectors,50mm Tial waste gates,50Tial blowoff,ect.. [$5800] I paid over 9k for this setup and if your nearby I can install and load the tune for you for a extra $650.00. TCI Th400 Rated 1400hp with transbrake, CSI Billet alum flexplate SFI rated,Pro Torque 3200 stall ,Gear Venders Over drive unit rated 2000hp. B&M Pro Ratchet Stealth shifter with button, 3" custom drive shaft with billet strange yoke.and B&M super tranny cooler with braided lines,custom tranny cross member bolts in stock location [$3400] I paid $4800. G Force Engineering 9" with 35 spline 300m axels rated at 1400+ hp with moser wave trac 35 spline posi unit.Strange Engineering S case with Strange 3.50 Gear,Strange billet yoke [$5200] I pd $6800. CCW SP16a Hyper Black Wheels fronts 20x10 with 2"lip rears 20x11 with 3" lip [$2500] I pd $3995. BMR subframe connector black powder coated [$200.] Mickey Thomson Drag Radial 305/35/20 6 passes [$550] I have more parts I can post pictures on monday for everything. Best way to reach me is 941-769-6515 call don't text I'm on the road alot. Thanks, Matt

bro this is hard to read. Maybe separate items using the enter key, just a thought since at least for me I stopped reading first sentence.

Quote:

Originally Posted by Matts Electric (Post 4806809)

I'm going to build a Outlaw Drag Radial TT 2012 Camaro,so I will be returning my 2011 SS Camaro to stock and all performance parts are for sale.

All the parts are top $$ parts I don't like to break anything so I spend more to have less headaches.

Complete TTI twin turbo setup with upgraded 6265 billet ball berring Percision turbos,1000hp intercooler,60lb injectors,50mm Tial waste gates,50Tial blowoff,ect.. [$5800] I paid over 9k for this setup and if your nearby I can install and load the tune for you for a extra $650.00.

TCI Th400 Rated 1400hp with transbrake, CSI Billet alum flexplate SFI rated,Pro Torque 3200 stall ,Gear Venders Over drive unit rated 2000hp. B&M Pro Ratchet Stealth shifter with button, 3" custom drive shaft with billet strange yoke.and B&M super tranny cooler with braided lines,custom tranny cross member bolts in stock location [$3400] I paid $4800.

G Force Engineering 9" with 35 spline 300m axels rated at 1400+ hp with moser wave trac 35 spline posi unit.Strange Engineering S case with Strange 3.50 Gear,Strange billet yoke [$5200] I pd $6800.

CCW SP16a Hyper Black Wheels fronts 20x10 with 2"lip rears 20x11 with 3" lip [$2500] I pd $3995.

BMR subframe connector black powder coated [$200.]

Mickey Thomson Drag Radial 305/35/20 6 passes [$550]

I have more parts I can post pictures on monday for everything. Best way to reach me is 941-769-6515 call don't text I'm on the road alot.

Thanks, Matt

Here you go man.

Quote:

Originally Posted by Nutro (Post 4806861)

Here you go man.

Thanks, I was going to make another list that post was just a heads up

pics of the BMR subframe brace?

Can i get pics of the turbo setup pls

How much for just the g force 9" Inch with axles

Quote:

Originally Posted by uniqueskillz (Post 4818282)

Can i get pics of the turbo setup pls

How much for just the g force 9" Inch with axles

PM sent

Where in fl are you? Can you email me pics of subframe brace? Christopher.birnbaum@us.army.mil

How much picked up if feasible

Quote:

Originally Posted by Birm (Post 4822863)

Where in fl are you? Can you email me pics of subframe brace? Christopher.birnbaum@us.army.mil

How much picked up if feasible

pm sent

Building a race car, this is my last TT 69 camaro outlaw 10.5 car its going to be similar but a 2012 outlaw drag radial car[ATTACH][ATTACH]Attachment 360560[/ATTACH][/ATTACH]

Dude that is fu****g insane!

Ok about the subframe brace, would I need to replace the tunnel brace as well?

Quote:

Originally Posted by Matts Electric (Post 4829992)

Building a race car, this is my last TT 69 camaro outlaw 10.5 car its going to be similar but a 2012 outlaw drag radial car[ATTACH][ATTACH]Attachment 360560[/ATTACH][/ATTACH]

holy shish kabob! :D

Nice car, wasnt that thing put together by Dan Neumann? I think i saw it a couple of years back in orlando for the world finals. I was asking dan about those custom bezels in the grille cause im building a similar car. He told me the guy who owns it is an electrician and he got them from some kind of lighting fixture. I hadnt realized you sold it.