Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Audio / Visual / Electronics/ Gauges / Nav (http://www.camaro5.com/forums/forumdisplay.php?f=79)
-   -   New revised PDIM available at GMPARTSHOUSE (http://www.camaro5.com/forums/showthread.php?t=123626)

patrickt 01-10-2011 09:54 PM

New revised PDIM available at GMPARTSHOUSE
 
1 Attachment(s)
Personal Device Interface Module (PDIM)
This Personal Device interface Module (PDIM) allows the user to plug their remote audio devices (iPod, MP3 player, etc.) into the USB port. The PDIM allows for command and control of the remote audio device through the radio and steering wheel controls.

Here is a thread with the origional problems that were fixed http://www.camaro5.com/forums/showthread.php?t=31235


Price 156.98

To order please give us a call or you can order here in our Camaro catalog http://store.gmpartshouse.com/partlo...egoryID=161268

patrickt 01-19-2011 11:06 PM

This is the latest design dont get one of the ones from some otherguys with the flawed software!!!!!

patrickt 01-26-2011 09:17 PM

If you already have one with the old software we have the upgrade module for that too price is 110.06 and can be ordered here http://www.gmpartshouseusa.com/partl...egoryID=161268

AuSStinVRCamaro 01-28-2011 07:25 PM

What is the p/n of the pdim you are selling? Thanks

patrickt 01-28-2011 08:35 PM

Quote:

Originally Posted by AuSStinVRCamaro (Post 2779659)
What is the p/n of the pdim you are selling? Thanks

20940641 for the complete add in kit or
20927509 for the module to upgrade an old unit

Gene Culley 01-30-2011 07:13 PM

Get your PDIM from GM Parts House.

patrickt 02-01-2011 09:58 PM

Dont be fooled get the latest edition!

patrickt 02-03-2011 10:45 PM

Awesome eddition to seamlessly integrate your MP3 player

Iwantone2 02-07-2011 05:55 PM

Question: When buying just the upgrade module, do we need to take our car back to the dealership to have it re-programmed? Or is this upgrade module plug-n-play?

patrickt 02-07-2011 07:25 PM

Quote:

Originally Posted by Iwantone2 (Post 2813720)
Question: When buying just the upgrade module, do we need to take our car back to the dealership to have it re-programmed? Or is this upgrade module plug-n-play?

It appears from the service procedure that it will be plug and play

patrickt 02-16-2011 10:09 PM

we can also install these as well if you are local or willing to travel

patrickt 02-18-2011 08:58 PM

get yours today

SSTony 02-19-2011 11:57 AM

for the updated part you are selling i have a question. I had the PDIM installed at my dealership. if I buy the udated part and want to install it myself what needs to be done? Is it the part thats in the console that needs to be replaced?

Gene Culley 02-19-2011 08:06 PM

Quote:

Originally Posted by SSTony (Post 2861648)
for the updated part you are selling i have a question. I had the PDIM installed at my dealership. if I buy the udated part and want to install it myself what needs to be done? Is it the part thats in the console that needs to be replaced?

If it is already installed all you'll need to do is replace the module and it will still work. I 2 new part number modules to test in mine tomorrow and then I will post the hardware and software versions and I will make sure it works as just a plug and play.

Gene Culley 02-20-2011 03:48 PM

Ok to the good stuff.

My build date was 5/29/2009 so I had part number 20840958 installed. The hardware version is CB/CC.

http://www.gmpartshouse.com/2010-camaro/20840958.jpg

http://www.gmpartshouse.com/2010-cam...0958-CB-CC.jpg



I have seen references to part number 20927509. This hardware version is DA/DX



http://www.gmpartshouse.com/2010-camaro/20927509.jpg

http://www.gmpartshouse.com/2010-cam...7509-DA-DX.jpg



I have also seen a new part number 20985421 in the catalog. This is version DB/DB.



http://www.gmpartshouse.com/2010-camaro/20985421.jpg

http://www.gmpartshouse.com/2010-cam...5421-DB-DB.jpg



This is not anything I've picked up off the internet. All 3 modules, versions and pictures were done by me today with my own personal vehicle.

If you don't have the PDIM and you buy the latest PDIM kit, 20940641, it will come with part number 20927509 (DA/DX). I know this because I just got a 20940641 kit on Friday and opened it and the part number on the module is 20940641.

It does appear to me that GM will be adding the new number, 20985421 to that kit, but it has not been done yet.

There is all of the good news.

The bad news is, if you have a 2010, the latest part number in any catalogs, with GM or reference material is 20927509 (DA/DX). If you get it done under warranty for a 2010 you will only be allowed to get 20927509 or the claim will bounce.

If you have a 2011 and you don't have part number 20985421, then you can get it and warranty will pay for it.

So the current PDIM add-on kit does not have the new part number in it as of this moment. I do believe, however, that it will shortly.

Personally, with the 2010's, I don't know why GM just doesn't change all of the part numbers over to the latest one, 20985421. The 2011 module works in the 2010 as that is what I did today. Any other questions, just ask. I'll answer if I know the answer!

patrickt 02-21-2011 10:52 PM

Quote:

Originally Posted by Gene Culley (Post 2865535)
Ok to the good stuff.

My build date was 5/29/2009 so I had part number 20840958 installed. The hardware version is CB/CC.

http://www.gmpartshouse.com/2010-camaro/20840958.jpg

http://www.gmpartshouse.com/2010-cam...0958-CB-CC.jpg



I have seen references to part number 20927509. This hardware version is DA/DX



http://www.gmpartshouse.com/2010-camaro/20927509.jpg

http://www.gmpartshouse.com/2010-cam...7509-DA-DX.jpg



I have also seen a new part number 20985421 in the catalog. This is version DB/DB.



http://www.gmpartshouse.com/2010-camaro/20985421.jpg

http://www.gmpartshouse.com/2010-cam...5421-DB-DB.jpg



This is not anything I've picked up off the internet. All 3 modules, versions and pictures were done by me today with my own personal vehicle.

If you don't have the PDIM and you buy the latest PDIM kit, 20940641, it will come with part number 20927509 (DA/DX). I know this because I just got a 20940641 kit on Friday and opened it and the part number on the module is 20940641.

It does appear to me that GM will be adding the new number, 20985421 to that kit, but it has not been done yet.

There is all of the good news.

The bad news is, if you have a 2010, the latest part number in any catalogs, with GM or reference material is 20927509 (DA/DX). If you get it done under warranty for a 2010 you will only be allowed to get 20927509 or the claim will bounce.

If you have a 2011 and you don't have part number 20985421, then you can get it and warranty will pay for it.

So the current PDIM add-on kit does not have the new part number in it as of this moment. I do believe, however, that it will shortly.

Personally, with the 2010's, I don't know why GM just doesn't change all of the part numbers over to the latest one, 20985421. The 2011 module works in the 2010 as that is what I did today. Any other questions, just ask. I'll answer if I know the answer!

Very nice writeup buddy I see someone was busy this weekend

patrickt 03-01-2011 10:27 PM

Order you PDIM today!

PCOLASHAN 03-08-2011 03:03 AM

When will you have the new part number 20985421, I want to replace my PDIM in my 2010? Thanks!

patrickt 03-08-2011 09:10 PM

Quote:

Originally Posted by PCOLASHAN (Post 2932492)
When will you have the new part number 20985421, I want to replace my PDIM in my 2010? Thanks!

We can get them now please feel free to give me a call or shoot me an email patrick@gmpartshouse.com

cm5217 03-13-2011 10:51 AM

so let me make sure i understand this.....I have a early 2010 2SS that has a PDIM from the factory so to get the newest version do i need the upgrade or do i need to replace my early PDIM?

Gene Culley 03-13-2011 05:44 PM

Quote:

Originally Posted by cm5217 (Post 2954613)
so let me make sure i understand this.....I have a early 2010 2SS that has a PDIM from the factory so to get the newest version do i need the upgrade or do i need to replace my early PDIM?

You need the 20985421 PDIM.

patrickt 03-13-2011 08:57 PM

Quote:

Originally Posted by Gene Culley (Post 2955795)
You need the 20985421 PDIM.

That is correct. Gene plugged them all in to see which ones worked and have the latest info. He's the man isnt he!

cm5217 03-14-2011 07:40 PM

Quote:

Originally Posted by Gene Culley (Post 2955795)
You need the 20985421 PDIM.

Is there a DIY for replacing the PDIM? I have no idea where it is and how to change it

patrickt 03-14-2011 11:58 PM

Quote:

Originally Posted by cm5217 (Post 2961084)
Is there a DIY for replacing the PDIM? I have no idea where it is and how to change it

I will make one up to post up

slick rick 03-15-2011 02:47 PM

Quote:

Originally Posted by cm5217 (Post 2961084)
Is there a DIY for replacing the PDIM? I have no idea where it is and how to change it

http://www.camaro5.com/forums/showthread.php?t=77662


All times are GMT -5. The time now is 05:06 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.