Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) (http://www.camaro5.com/forums/forumdisplay.php?f=76)
-   -   Can ring and pinion be installed w/ pumpkin in car? (http://www.camaro5.com/forums/showthread.php?t=124849)

GMRULZ 01-18-2011 07:27 PM

Can ring and pinion be installed w/ pumpkin in car?
 
...or does the pumpkin have to be removed. I know on my old solid axle 4th gen stuff we could do it in car, unsure on this 5th gen setup? Any help?

Also anybody know what type of increase one would see ET and mph wise in the 1/4 on an auto car?

GFORCE1320 01-18-2011 09:48 PM

Once you drop the exhaust, driveshaft and the axles, you only have 3 bolts left to drop the rear. IRS rears are easier to build on a bench IMO.

Apex Motorsports 01-19-2011 08:33 PM

Like GFORCE said, it comes out very easily and it makes it much easier to work on with it our. Surprisingly few people have posted their before and after ET and MPH but this was posted the other day.

Quote:

Originally Posted by advfire (Post 2736059)
I liked how they made the car run and during Friday night run at the track I went from a 126 top MPH in the 1/4 to a 133 top MPH in the 1/4 ( major difference ).

Quote:

Originally Posted by advfire (Post 2738003)
gained a solid .5 seconds and increased MPH up 8



All times are GMT -5. The time now is 04:30 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.