Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Forced Induction - V8 (http://www.camaro5.com/forums/forumdisplay.php?f=74)
-   -   What Kind of Power Are Camaros Making at 10 psi? (http://www.camaro5.com/forums/showthread.php?t=150733)

kennynobodyrs 06-02-2011 10:00 PM

What Kind of Power Are Camaros Making at 10 psi?
 
Just wondering if there is a significant increase in power between 7psi and 10psi.. I want to know hp/tq 10psi is making at the rear wheel.

Brad7294 06-02-2011 10:53 PM

Just put on whipple from jannetty racing. He sent me tune on the sct tuner. 10psi Car puts down 672 rwhp & 590tq. Ted knows his stuff. Car runs strong.

SSCeejay 06-02-2011 11:05 PM

Quote:

Originally Posted by Brad7294 (Post 3294307)
Just put on whipple from jannetty racing. He sent me tune on the sct tuner. 10psi Car puts down 672 rwhp & 590tq. Ted knows his stuff. Car runs strong.


Are you running the stock internals with 10 psi?

Supercharged SS 06-02-2011 11:11 PM

On a bone stock L99 we put down 550/500 at 10 psi (TVS 2300). Also a Jannetty car and damn on the Whipple!! Those things are no joke!!

Brad7294 06-02-2011 11:22 PM

Yes,only change inside was blower cam.

calbert1999 06-02-2011 11:24 PM

Depends on the type of SC you use, and how good the tuner is. I know lot's of guys including myself making more than 670rwhp. on less than 10psi. boost @ 6000rpm. My vehicle makes 690rwhp. on less than 7.5psi. and 740rwhp. on 8.5psi. will also depend on other factors like CAI, headers, CAM, exhaust, etc....

halo8hkk 06-02-2011 11:26 PM

Nice numbers. GO WHIPPLE:D

Brad7294 06-02-2011 11:28 PM

Good point. All depends what charger you are using. Great numbers on that procharger!

Inferno LSX 06-02-2011 11:32 PM

Cars in the shop right now getting a Whipple. The shop installing and tuning(Haddad Motorsports) says I'll just "kiss" 10PSI and should at least make 600hp to the ground.

Brad7294 06-02-2011 11:39 PM

Whipple.Good choice. Put cam in it!

Inferno LSX 06-02-2011 11:41 PM

Quote:

Originally Posted by Brad7294 (Post 3294480)
Whipple.Good choice. Put cam in it!

I'll do it the same time the bottom end gets forged. then i can shot for 800+ HP

Brad7294 06-02-2011 11:45 PM

Even better!

Turbo99 06-02-2011 11:50 PM

I sure would like to start seeing some track times and trap speeds for all there so claimed 650-700 hp cars......... because I think there are a bunch of dyno queens and prolly really are not that high.

bigsquirrel 06-02-2011 11:54 PM

1 Attachment(s)
Not really but the thread was about but hey...
Attachment 247749


All times are GMT -5. The time now is 01:18 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.