Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Forced Induction - V8 (http://www.camaro5.com/forums/forumdisplay.php?f=74)
-   -   5th Gen Gets Magnacharged 554RWHP (http://www.camaro5.com/forums/showthread.php?t=154313)

MTI Racing Kevin 06-22-2011 03:03 PM

5th Gen Gets Magnacharged 554RWHP
 
Jerry has been rolling with his stock 5th Gen for about a year now but decided it was time to make the trip to MTI Racing for some upgrades.

Jerry's Camaro is now a Fire Breathing Monster with 554HP at the tire, that is 651HP at the crank and is a 205hp gain over stock. This Monster Camaro also has 528LBS of torque at the rear tire. I think Jerry will be needing some new tires shortly. Check the list of goods below.

Magnacharger TVS2300 Camaro Supercharger
MTI Racing Stage 2 Camshaft and valvetrain Upgrade
Camaro Long Tube Headers, high-flow cats, x-pipe
Katech C5R Z chain
LS7 Bowtie Damper
MTI Racing plug wires
DMH exhaust cutouts, low profile
MTI Racing Lowering Springs and Swaybar combination for Camaro
Aluminum Catch can/ vent tank
Low Temp Thermostat 100228
MTI Racing tuning

Baseline 349hp
After mods 554hp
Thatís an increase of 205hp at the rear tires!! BAM!!
http://farm3.static.flickr.com/2709/...ea91165b0d.jpg
Jerry and his son with their 554RWHP Camaro.
http://farm6.static.flickr.com/5025/...ccfd8830d2.jpg

LittleMT 06-22-2011 03:07 PM

sweetness.....just ordered a set of hot spark plug wire from you cats....

LS1-Z28 06-22-2011 07:42 PM

MTI,

My Dad and I absolutely love this car!! It's amazing how much quicker it climbs up in speed. It will absolutely pin you in your seat!! The DMH Cut-Outs just set it over the top, it's amazing to see people's reactions when we pull into somewhere with them fully open and they turn to expect an old muscle car but see this.

Thanks for the hookup with my car also!! I love it and it will be coming to see you guys in the near future to get "juiced" up.

Thanks again, we hope to see you guys next summer to add a little more to it :headbang:

:thumbup:

EDIT: The only mods the car had when we dropped it off was, Borla S-Type Axle Back Exhaust and a CAI, but MTI switched it out with there CAI system. This car is a GREAT improvement over stock!!

RJT-Maro 06-22-2011 08:23 PM

It's absolutely AWESOME. Sounds great, handles great, and never quits accelerating!!!!!!!!!!

Now I need to update my sig..........don't know if there will be enough room to put all the mods...

Thanks MTI for a great build!
:thumbup::thumbup::thumbup::thumbup::thumbup:

2010 SSRS 06-22-2011 08:27 PM

awesome numbers, I can't wait to get mine Supercharged.

PQ 06-22-2011 08:30 PM

M6 or A6 :iono:

RJT-Maro 06-22-2011 08:34 PM

M6

PQ 06-22-2011 08:40 PM

Quote:

Originally Posted by RJT-Maro (Post 3373027)
M6

:confused0068: Dude. It was YOURS?

RJT-Maro 06-22-2011 08:48 PM

Oh yeah and it's sweet.........but with a real mean streak! :laugh:

PQ 06-22-2011 08:49 PM

Well congrats. I bet you love it.

Mines at Vengeance right now. I already had the Maggie but they are doing a cam. I'm hoping for around the same numbers but with yours being a M6 I might need to lower my expectations.

I bet it's a night and day difference.

RJT-Maro 06-22-2011 09:00 PM

night and day may be an understatement. Performance gain is huge. (and the cutouts are just plain FUN to mess with people...)

PQ 06-22-2011 09:01 PM

Quote:

Originally Posted by RJT-Maro (Post 3373142)
night and day may be an understatement. Performance gain is huge. (and the cutouts are just plain FUN to mess with people...)

I'd do cut-outs but I'm extending myself as it is. :rolleyes:

Can't wait to hear them.

Sttt5126 06-22-2011 09:35 PM

My vert is in the shop for a Stage 3 supercharger package now. Can't wait to get it back!

sscamaro 06-23-2011 02:37 PM

My M6 is 546/rwhp and 522/rwtq with no cam. See sig.

RJT-Maro 06-23-2011 04:34 PM

Quote:

Originally Posted by sscamaro (Post 3376124)
My M6 is 546/rwhp and 522/rwtq with no cam. See sig.

How much boost are you running?? I am only running between 5 and 6 psi........... next summer I may go back and do CNC Ported Heads, Forged Pistons, upgrade the rocker arms, BAP, and turn the boost up a little, probably 8or so, or whatever MTI thinks is safe with those upgrades, and more...

It's WAY more then I need right now - having to learn how to drive it all over again........... :laugh: So that's why I am waiting a while before I go back into the engine, and so my wife won't kill me haha. Those are impressive numbers you are making! Congrats! :thumbup:

MTI Racing Kevin 06-24-2011 07:33 AM

It sounds like you and your son are having a great time with your cars. We knew you would love the car and everybody thinks the cutout are awesome. You will have to join us for the MTI Racing Camaro track day. We are working on setting up a date for this event. We will let you know.

sscamaro 06-26-2011 03:41 PM

Quote:

Originally Posted by RJT-Maro (Post 3376641)
How much boost are you running?? I am only running between 5 and 6 psi........... :

That was at 6 PSI boost.

RJT-Maro 07-11-2011 01:33 PM

Quote:

Originally Posted by MTI Racing Kevin (Post 3378888)
It sounds like you and your son are having a great time with your cars. We knew you would love the car and everybody thinks the cutout are awesome. You will have to join us for the MTI Racing Camaro track day. We are working on setting up a date for this event. We will let you know.

Looking forward to being there

PQ 07-11-2011 01:36 PM

Like Dr Jkels, those cut-outs are so F-ing cool I'm dying over here. I WILL have them.

Sounds amazing in person. Congrats again dude. See ya at Pony Wars probably. :thumbsup:


All times are GMT -5. The time now is 09:42 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.