Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Forced Induction - V8 (http://www.camaro5.com/forums/forumdisplay.php?f=74)
-   -   Dangeruss LSX 427 build by ARD (http://www.camaro5.com/forums/showthread.php?t=170888)

Dangeruss 09-12-2011 01:27 PM

Dangeruss LSX 427 build by ARD
 
40 Attachment(s)
ARD got started on my LSX this weekend, and they let me come in and watch. Some of you know I already have a Whipple, nitrous and a 4L80 transmission. I was making over 600RWHP (700RWHP on nitrous), but we knew we were at the limits of the block. I wanted more power and stability...here's what we're going with.

- GMPP LSX Block (bored to 427)
- Wiseco Pistons
- Callies Rods
- Callies Crank
- LS3 Ported Heads
- Manley Valves, Springs, Titanium Retainers, Locators
- Comp Cam - Duration: 227/243 - Lift: 614/624 - LSA: 114
- ARP Studs
- 85 LB Injectors
- LS7 Lifters
- Comp Cam - Duration: 227/243 - Lift: 614/624 - LSA: 114
- Rollmaster Double Timing Chain
- Meling Oil Pump
- Oil Cooler
- MSD Plug Wires
- NGK Spark Plugs

For a list of all my mods, here's a link to my build thread.

http://www.camaro5.com/forums/showthread.php?t=65275

Here are some pics from yesterday. I'll update this thread as we go along.

BLACK10 09-12-2011 01:45 PM

Sweeeeet! 1000rwhp here you come!

victoryred1ss 09-12-2011 02:33 PM

Awesome build!

DJBullitz 09-12-2011 02:33 PM

One mans dream anothers ride.... Wish I could do the same to mine... getting there little pieces at a time. Awesome...

HufferSS 09-12-2011 02:48 PM

Why meth and nitrous? Just curious.

The Stig 09-12-2011 02:52 PM

I believe meth is used to lower temps and to increase the rating of the fuel. But I could be wrong, and if so: please disregard everything I just said.

Dangeruss 09-12-2011 03:00 PM

Quote:

Originally Posted by HufferSS (Post 3744303)
Why meth and nitrous? Just curious.

Power and safety. With meth we can add more timing to get more HP on just blower. It also gets very hot here in Houston, so the meth will help keep things cooler. I'll only use nitrous at the track, so it will be the icing on the cake. :)

LSX-80MM 09-12-2011 03:01 PM

Nice....What's the cc on those pistons?And who built the 4l80?I'm needing one NOW!Oh yea get ready for hard chest compressions when that thing is finished:D

speedster 09-12-2011 04:31 PM

Quote:

Originally Posted by BLACK10 (Post 3744029)
Sweeeeet! 1000rwhp here you come!


Russ has the elusive 4-digit disease... :headbang:

Dangeruss 09-12-2011 04:48 PM

Quote:

Originally Posted by LSX-80MM (Post 3744367)
Nice....What's the cc on those pistons?And who built the 4l80?I'm needing one NOW!Oh yea get ready for hard chest compressions when that thing is finished:D

I'm not sure...I'm definitely not an expert. I do know that the compression will be 9.5-1.

The 4L80 was also built by ARD here in Houston. Send me a PM and I'll get you their info.

shadow09 09-12-2011 04:57 PM

everything looks good Russ! And coming along nicely :thumbsup: I'll need to stop at ARD some time and look at the motor in person. If not guess I'll have to wait till everything is put in and ready for Camaro Nationals :chevy:

2010 SSRS 09-12-2011 04:59 PM

Awesome build, another Camaro beast in the making :thumbup:

Dangeruss 09-12-2011 05:39 PM

Thanks for all the compliments guys...It's gonna be a blast!

Gotthat02fire 09-12-2011 06:46 PM

Wow racing at the next Camaro fest will be at a whole new level this is going to be a blast!!!!! Looks like lots of fun Russ!!!!!!

rolnslo 09-12-2011 06:59 PM

Never quite satisfied with the status quo, are you Russ? :bellyroll:

Will it be ready to go in time for the Camaro Nationals in a few weeks? If so, I'm assuming Owen's already made sure that he'll still be able to outrun you in the 1/4 mile? :popcorn:

Looking forward to seeing it make some runs down the track...should be quite the sight! :thumbsup:

Dangeruss 09-12-2011 07:03 PM

Quote:

Originally Posted by rolnslo (Post 3745345)
Never quite satisfied with the status quo, are you Russ? :bellyroll:

Will it be ready to go in time for the Camaro Nationals in a few weeks? If so, I'm assuming Owen's already made sure that he'll still be able to outrun you in the 1/4 mile? :popcorn:

Looking forward to seeing it make some runs down the track...should be quite the sight! :thumbsup:

We are expecting it to be ready for the Nationals. Owen's been busy working on all of our cars, but his car is a proven monster. It's gonna be a crazy race, because there will be a large number of beasts there.

mlee 09-12-2011 07:48 PM

You and Madd600+ are going to lock horns for sure at the TCN....:popcorn:

Dangeruss 09-12-2011 07:59 PM

Quote:

Originally Posted by mlee (Post 3745524)
You and Madd600+ are going to lock horns for sure at the TCN....:popcorn:

Should be fun...at least we know who'll leave the line first. ;)

mlee 09-12-2011 09:10 PM

Quote:

Originally Posted by Dangeruss (Post 3745570)
Should be fun...at least we know who'll leave the line first. ;)

LOL... for sure....

At least I got a win slip on him..... when he redlighted..:paddle:

showstopper 09-12-2011 09:13 PM

Damn

Sent from my HTC Sensation 4G using Tapatalk

Dangeruss 09-12-2011 09:47 PM

Quote:

Originally Posted by mlee (Post 3745867)
LOL... for sure....

At least I got a win slip on him..... when he redlighted..:paddle:

LOL! :sm0: :sm0: :sm0:

mst504 09-13-2011 12:17 AM

That is hot.
Wish I could do that, and not have to worry about emissions. :(

Darth V8R 09-13-2011 01:31 AM

Nice! I just wish you'd taken clearer, more detailed pictures... :)

Dangeruss 09-13-2011 10:34 AM

Quote:

Originally Posted by Darth V8R (Post 3746793)
Nice! I just wish you'd taken clearer, more detailed pictures... :)

:laugh: Yea...taken with my iPhone camera. ;)

Hendrix-Engineering 09-13-2011 11:36 AM

GO ARD!!
 
Great build with some great guys behind you. Did i meet you in Arizona?


All times are GMT -5. The time now is 04:57 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.