Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums -

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - (
-   Exterior Parts & Accessories (
-   -   No drill / No adhesive front license plate mount brackets from JacFab! (

Jason@JacFab 12-06-2011 03:39 PM

No drill / No adhesive front license plate mount brackets from JacFab!
Available from JacFab, a front license plate mount bracket that doesn't require drilling into your new sweet ride's bumper, and leaves no adhesive residue to clean up!

These are CNC waterjet cut from 3/16" thick 5052 aluminum. From there they are bent, on a CNC press brake, and then powder coated semi-gloss black. They bolt onto the bottom of the bumper with two existing bolts, and are supplied with all new stainless hardware.

Some states require than you have a front license plate, some don't (lucky you!), don't give the fuzz a reason to pull you over! The bracket comes off easily for car shows, and doesn't leave any unsightly holes in your painted front bumper.

They are available in 2 different styles. Bent style, of flat.

Bent Style

Flat Style

Both styles are available now for v6, and v8 cars! Feel free to check out the JacFab Website, you can order directly from the Camaro Products page.

Below is a video shot with a GoPro camera that was taken while prototyping the bent style v6 bracket. I took this video to see how stable the bracket is at driving speeds, and as you can see it's rock solid.

PAUL SS 12-06-2011 03:54 PM

First time I get pulled over for no front plate, I will order one of these.

Jason@JacFab 12-07-2011 06:24 PM

Hey guys just wanted to let you know that we have sold out of all of the bent style v8 brackets, but should have more ready to go Monday/Tuesday. We have plenty of bent style v6 brackets in stock, and the flat style v6 bracket will have it's last trial fit tomorrow. If that goes well, flat style v6 brackets will be offered to the public!

Here's a JacFab license plate bracket product review video on youtube that was done recently, they gave us a 10 out of 10!

Blue10CamaroSS 12-07-2011 06:31 PM

NJ woot woot!!!

Jason@JacFab 12-08-2011 03:46 PM

Flat style brackets for the v6 are in stock now, and available for ordering on the website!

I dropped the next batch of bent style v8 brackets off at the powder coater this morning, they should be ready to ship Mon/Tues next week!

Haole 12-08-2011 05:19 PM

For everyone reading this post and on the fence on this bracket, let me tell you it is well worth the money. I looked at so many other brackets and the DIY one with,the factory plate mount. This bracket is very easy to mount, I have the bent one for the V8 and love it.


RichGreene 12-08-2011 07:52 PM

Another unpaid testimonial from the Cleveland area. After testing at warp speeds and some lousy roads these things are Rock Solid. The bent one actually upgrades the whole look of the front end.

bajamoon 12-08-2011 08:02 PM

Waiting for the v8 bent style to be in stock. Been wanting to get it

nasty2ss 12-08-2011 08:16 PM

Thats the bracket that should come with the car. Might have to get this. It really does add to the look of the car. Great job on the design guys

Haole 12-08-2011 08:49 PM

Nasty, trust me you will love this on your IOM. Like i said in my post I have the bent bracket and it is awesome.

Fiveg56 12-08-2011 10:05 PM

Just ordered one. Excited to get it on.

NYJETSFAN 12-08-2011 10:20 PM

looks great.

Jason@JacFab 12-08-2011 11:29 PM

Thanks for the compliments guys, I'm glad you're happy with them! :thumbsup:

Fiveg56, thanks for your order! It will ship out in the morning, UPS tracking info to follow!

Jason@JacFab 12-14-2011 02:04 PM

OK guys! I just picked up the bent style v8 brackets from the powder coater! They are available for ordering on the website now!

Also as of yesterday, the JacFab Holiday Extravaganza sale is on now! 10% off all JacFab Products (I have already changed the prices on the the website, no coupons needed!), and receive a FREE filter recharge kit, and FREE shipping with any purchase of a Cold Air Inductions performance intake!

Sale ends at 11:59pm 12/25/11, order now! :thumbsup:

RichGreene 12-14-2011 02:23 PM

On your website it says the tunnel brace is coming soon. When will that be ?

Jason@JacFab 12-14-2011 04:13 PM


Originally Posted by RichGreene (Post 4165252)
On your website it says the tunnel brace is coming soon. When will that be ?

:facepalm: I thought I took that off there. I just fixed it, they are available now, I currently have one left in stock, working on more right now.

You may also want to check this out: The sale is valid on custom tunnel braces also.

Jason@JacFab 12-19-2011 02:27 PM

Only a week left of the JacFab Holiday Extravaganza Sale! We have plenty of v6 and v8 brackets in stock, as well as our HD drive shaft tunnel braces.

Fiveg56 12-19-2011 04:01 PM

Just installed the no-drill front plate bracket (flat, V6). The cut and fit is perfect and it looks great. Well worth the money.

Fiveg56 12-19-2011 04:27 PM

2 Attachment(s)
Here are the pics...

Jason@JacFab 12-19-2011 07:04 PM

Fiveg56 is the first with the new flat style v6 design. Thanks for posting pics, and I'm glad you like it!

On that note, we've already sold the last flat style v6 bracket we had in stock today... I find it strange how so many v6'ers wanted the flat style vs the v8 guys. I've been picking away on the same flat style v8 bracket stack for almost a year now, and the v6 guys have blown through a whole batch in about 2 weeks!!! More flat style v6 brackets are in the works right now, still have some flat v8, and plenty of bent style v6 and v8 brackets.

Jason@JacFab 12-23-2011 11:09 AM

Thanks for all of the orders! So far all orders for the Holiday Extravaganza Sale have been shipped! Remember that the sale ends Christmas night (12/25) at 11:59pm, so get your orders in to save that extra $$ on all JacFab products!

RichGreene 12-23-2011 02:44 PM

The V8 guys are savvy enought to realize that the v-shaped mount is more aerodynamic to cut through the wind at warp speed !!!

Jason@JacFab 12-25-2011 03:29 PM

Merry Christmas from the JacFab crew! Remember the Holiday Extravaganza ends tonight at 11:59pm pst!

Also, just to clear up any misunderstandings, the prices on our website have already been marked down to the sale prices! There are no coupon codes, or further discounts. We do this so everyone has a chance to benefit, not just those fortunate enough to find a discount code, or other form of discount.

Jason@JacFab 12-30-2011 04:51 PM

Just wanted to thank everyone for all of the orders during the Holiday Extravaganza sale! Even though the sale is over, our brackets are still cheaper than the competition, and you actually get a nice, and sturdy product for your money! Plenty of bent style v6 and v8 brackets in stock. Flat style for both are in the works right now.

Jason@JacFab 01-16-2012 11:36 PM

Only 1 bracket left in stock at the moment... A bent face v8 bracket. Good news though! The next batch of v8 brackets will be ready to go on Wednesday; both bent and flat face style!

The v6 brackets (bent and flat also) go into production tomorrow, and hopefully will be ready to go mid next week.

Thanks for all of the orders!

All times are GMT -5. The time now is 07:42 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2015, vBulletin Solutions, Inc.