Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Engine Internals (http://www.camaro5.com/forums/forumdisplay.php?f=125)
-   -   LS3 Stroker Kit Specials (http://www.camaro5.com/forums/showthread.php?t=190353)

dynosteve 12-22-2011 09:00 AM

LS3 Stroker Kit Specials
 
1 Attachment(s)
RDP Motorsport are doing a huge Stroker Kit specials all the way up to a 427cui combination,
Kits consist of
K1 4340 Crankhaft
K1 Connecting Rods with ARP Rod Bolts
Wiseco Coated Pistons
Rings and Pins with Spiral Locks
Clevitt 77 Bearings
Kit Comes Fully Balanced
For more information ring our friendly sales team on 440 358 5500

www.rdpmotorsport.com

dynosteve 12-24-2011 01:55 PM

We are also doing specials on short and complete motors as well and we can also offer 6 months interest free financing

dynosteve 12-31-2011 08:39 AM

Any Stroker Kit or Motor Ordered will receive a Free Dyno Session on our Dyno Dynamics Chassis Dyno

7second 01-16-2012 01:04 PM

whats the price on the rotating assembly?

dynosteve 01-16-2012 02:56 PM

Quote:

Originally Posted by 7second (Post 4327672)
whats the price on the rotating assembly?

$2495 sir

Drottie 02-11-2012 11:06 AM

Steve, what kind of rwhp could one expect with one of these kits with LT headers and a CAI? Would a cam swap be recommended at the same time? Just wondering if this would be a better route for me than going with a FI.

dynosteve 02-12-2012 09:25 AM

Quote:

Originally Posted by Drottie (Post 4467161)
Steve, what kind of rwhp could one expect with one of these kits with LT headers and a CAI? Would a cam swap be recommended at the same time? Just wondering if this would be a better route for me than going with a FI.


It all comes down to the heads cam etc that you use, the bottom end is really only the pump for the combination, personal preference if it was me would be going the FI route just want to be honest with you:)

SinfulCamaro 06-21-2012 03:48 AM

whats the best bang for the buck for the ls3 manual? stroker w/head cam? stroker only? heads cam only? FI only?

dynosteve 06-21-2012 11:27 AM

Quote:

Originally Posted by exZACKly (Post 5163738)
whats the best bang for the buck for the ls3 manual? stroker w/head cam? stroker only? heads cam only? FI only?

personally sir it will always be forced induction for dollar for dollar hp

SinfulCamaro 06-22-2012 05:59 AM

what if you only can spend 4k on parts than what?

dynosteve 06-28-2012 07:37 AM

[QUOTE=exZACKly;5170195]what if you only can spend 4k on parts than what?[/QUOTE

give me a call sir and let me see what i can work out for you

thanks Steve
RDP Motorsport
440 358 5500

SinfulCamaro 07-14-2012 03:26 AM

whats your price with install for a stroker kit with heads ported with cam? email me please. thanks

monstertodd 07-26-2012 02:33 PM

Quote:

Originally Posted by dynosteve (Post 4205041)
RDP Motorsport are doing a huge Stroker Kit specials all the way up to a 427cui combination,
Kits consist of
K1 4340 Crankhaft
K1 Connecting Rods with ARP Rod Bolts
Wiseco Coated Pistons
Rings and Pins with Spiral Locks
Clevitt 77 Bearings
Kit Comes Fully Balanced
For more information ring our friendly sales team on 440 358 5500

www.rdpmotorsport.com

Steve what would this kit do for my motor if I'm ALREADY running a Lysholm 2.3 blower?

K1SSRSS 07-27-2012 12:22 AM

What short and long block 427 options do you offer. I am looking for a ls motor for my 68, I plan on going with some type of forced induction in the future, so I would like to be probably around 9 to 1 compression eventhough It wont get a super charger or turbo for a year or two.

govea23 02-14-2013 10:30 PM

would love to get more information on this if you could pm me!


All times are GMT -5. The time now is 12:31 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.