Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Transmission / Driveline (http://www.camaro5.com/forums/forumdisplay.php?f=95)
-   -   Driveshaft Shop 1400HP Level 5 Direct Bolt-In Axles Now @ APEX Motorsports!!! (http://www.camaro5.com/forums/showthread.php?t=214913)

Apex Motorsports 04-07-2012 06:59 PM

Driveshaft Shop 1400HP Level 5 Direct Bolt-In Axles Now @ APEX Motorsports!!!
 
http://www.apex-speed.com/images/det...4/RA5414X5.jpg


Driveshaft Shop 1400HP Level 5 Direct Bolt-In Axles: $1599.98



Product Description

1. Full 30 spline certified 300m center bars (not just 28 spline like a factory 108mm CV would use) yes we said 30 spline like the Viper T56 and any upgraded T56 its the reason we do too. If the cages are stronger the bars need to be also (same center bar used in Lingenfelters 6 speed car)

2. Certified 4340AQ cages REM polished with a re-designed radius on the cage window, cages are full 4340 not the standard material that have been carbinized and made brittle.

3. Our center race in the CV is certified 300m, this should need no explanation, no one else uses this and we can prove it.....

4. Rolled splines, most know a forging is always stronger than billet. Here at The Driveshaft Shop we roll our splines, this is by far the strongest way to form a spline and is far superior to "old technology" cut splines. By rolling a spline you are taking the material that was already there and re-forming it. By cutting a spline you are removing material and the inherent grain structure that its made with. Dont take our word for this, please search the internet and see what spline is better. If your looking for the strongest axle you have arrived......

It should come as no surprise that we here at DSS never stop thinking about new ways to make an axle. We try to not only make it better but less expensive at the same time. For several months we have been working with some of the top tuning company's around fine tuning and understanding what our customers needs were. What issues the car had after it came out, manufactures made lowering parts and other goodies and with these changes we decided to re-design the axles. Due to a new relationship with a steel mill and the ability for us to buy direct we not only have been able to reduce our cost on many new products but we are also able to announce the release of some new aircraft quality materials that rival top rated product on the market today.

We are proud to introduce the 1400Hp axles for the 2010 Camaro, we were going to put a 1800Hp rating but knowing the differential will break at about 1000Hp we feel the 1400Hp number was impressive enough. We recently were made aware the our (and other manufacturers) 108mm outer c.v. and bolt system may have a clearance issue with a lowered car squatting real hard at the track. We took our test mule thru complete suspension travel and the bolts holding the outer CV on at the wheel end on a 108mm CV (any thing larger or longer than our 108mm CV may be a catastrophic event bottoming the suspension out on the upper control arm) well it touched the upper control arm, not much and with a little grinding would clear it, but being its a brand new car and "no one wants to grind" we have designed a new CV for the application that is not only stronger but more cost effective to manufacture.

lionssfan 04-17-2012 10:06 PM

Hello I have some DSS 1400Hp axles and I've tried contacting DSS direct with phone call messages for parts with no call back . Can you get me some two c-clips one for each axle ? thanks Dan

Apex Motorsports 04-19-2012 06:43 PM

Quote:

Originally Posted by lionssfan (Post 4822746)
Hello I have some DSS 1400Hp axles and I've tried contacting DSS direct with phone call messages for parts with no call back . Can you get me some two c-clips one for each axle ? thanks Dan

I wish I could help but we do not carry individual components like that.

eblake98 05-08-2012 03:31 PM

price match
 
your price is higher than another authorized vendor

Apex Motorsports 05-08-2012 04:25 PM

Quote:

Originally Posted by eblake98 (Post 4930484)
your price is higher than another authorized vendor

Just forward a link to me and I will take care of you.

mst504 05-20-2012 06:08 PM

How long is the 10% gift certificate good for? And does it apply to total purchase, or one item?

Apex Motorsports 05-20-2012 06:14 PM

Quote:

Originally Posted by mst504 (Post 4993653)
How long is the 10% gift certificate good for? And does it apply to total purchase, or one item?

The gift certificate is good for 1 year. It can be applied to any future purchase.

Apex Motorsports 08-09-2012 05:44 AM

Thanks to everyone that stopped by the APEX tent at Camaro5Fest!

http://sphotos-b.xx.fbcdn.net/hphoto...89304591_n.jpg

stubby 11-18-2012 10:23 AM

DSS 1400 hp fit a 2012?
 
In looking at the DSS website, it only shows 2010-2011. Will the PART # RA5414X5 AND RA5415X5 be a direct fit for a 2012?

Birm 11-18-2012 04:56 PM

Quote:

Originally Posted by stubby (Post 5820790)
In looking at the DSS website, it only shows 2010-2011. Will the PART # RA5414X5 AND RA5415X5 be a direct fit for a 2012?


Also, will these part #s work on a car lowered 1" with Eibach Pro series springs?

Apex Motorsports 11-19-2012 05:46 AM

Quote:

Originally Posted by stubby (Post 5820790)
In looking at the DSS website, it only shows 2010-2011. Will the PART # RA5414X5 AND RA5415X5 be a direct fit for a 2012?

Yes. Their product descriptions are terrible.

Quote:

Originally Posted by Birm (Post 5821723)
Also, will these part #s work on a car lowered 1" with Eibach Pro series springs?

Yes

Apex Motorsports 08-03-2013 05:29 AM

Thank you for your weekend orders Camaro5!

http://apex-speed.com/images/emoticons/morgan_ships.jpg


All times are GMT -5. The time now is 01:08 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.