Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   V8 Bolt-Ons & Tunes (http://www.camaro5.com/forums/forumdisplay.php?f=78)
-   -   NEW ERA PERFORMANCE | OTR - "Over The Radiator" 6.2L Camaro Cold Air Intake System! (http://www.camaro5.com/forums/showthread.php?t=216347)

AutoAgenda 04-13-2012 05:39 PM

NEW ERA PERFORMANCE | OTR - "Over The Radiator" 6.2L Camaro Cold Air Intake System!
 
2010+ Camaro 6.2L V8 New Era Performance OTR Cold Air Intake

OTR - Over The Radiator


http://autoagenda.com/uploads/images...d8b__large.jpg

Want power you can feel? Looking for a unique look when you pop your hood? Our Over the Radiator Intake system for your new Camaro is the easiest solution for you! Custom fabricated in house from 5052 aluminum with a CNC billet MAF sensor flange, unique eliptical air entrance offset into airbox, powder coated black chrome, using t304 stainless hardware, a high temp silicone coupler with 304 Stainless liner clamps,100% made in the USA and utilizing a K&N filter. If you are looking for the best craftsmanship and quality of your CAI system, then you just found it. We didn't build this kit to be the cheapest, we built it to be the best!

The New Era Performance “OTR” (Over The Radiator) air intake system is the most unique air induction system available for the 5th Gen Camaro SS. The concept derives from this fact: The best source of low temperature air is in front of the vehicle (especially when it is in motion). The OTR tilts the top of the radiator back about 2 inches, securing it with the mounting tabs affixed to the bottom of the filter housing.

When compared against other performance air intakes in a recent outside test, the New Era OTR was proven to provide the lowest intake air temperature to the engine. Lower intake air temperature results in more power! Also, the system’s shorter, more direct, 4” charge duct allows for a great improvement in throttle response. To prevent filter blockage such as bugs and dirt, a shield is installed in front of the filter, attaching to the factory radiator mounting bolt holes. This also helps prevent water from reaching the filter in heavy rain.

On our completely stock 2010 Camaro SS (automatic) from simply bolting on the New Era OTR air intake system, we gained 22rwhp and 24lb/ft rwtq. With the addition of a custom PCM tune on this particular car, we were able to gain an additional 8rwhp and 4lb/ft rwtq for an overall gain of 30rwhp and 28lb/ft rwtq!

Customer Review: http://www.camaro5.com/forums/showthread.php?t=222495


Parts Description:
  • Does not require PCM tune or any additional parts. Fully compatible with stock calibration. Install it directly on a stock OR modified car!
  • Highly-Skilled hand TIG-welding
  • 304 Stainless-steel hardware
  • 4-ply high-temp black silicone couplers
  • High-quality stainless-steel liner back screw clamps
  • New Era billet aluminum MAF flange
  • Laser cut filter frame, and air box
  • Polished mandrel bent aluminum tubing
  • Currently available in the following finishes:
  • Matte Black Powder Coat
  • Gun-Metal Powder Coat
  • Raw Aluminum Finish (ideal if you seek a custom finish)
  • Approximately 1/2 hour to install, includes installation instructions.
  • 100% Made in the U.S.A
Order Here: http://autoagenda.com/2010-camaro-6....old-air-intake


http://www.neweraperformanceparts.co...s/100_1424.jpg

Gun Metal Powder Coat Finish seen above or Flat Black Powder Coat seen below:

http://autoagenda.com/uploads/images...otr__large.jpg


http://autoagenda.com/uploads/images...aph__large.jpg



AutoAgenda 04-13-2012 05:40 PM

http://www.neweraperformanceparts.co...s/100_1414.jpg

http://www.neweraperformanceparts.co...s/100_1423.jpg

http://www.neweraperformanceparts.co...s/100_1417.jpg

http://www.neweraperformanceparts.co...s/100_1419.jpg

http://www.neweraperformanceparts.co...s/100_1424.jpg

http://www.neweraperformanceparts.co...s/100_1982.jpg

AutoAgenda 04-21-2012 12:47 PM

http://autoagenda.com/2010-camaro-6....old-air-intake

PM or Post w/ Any Questions!

AutoAgenda 04-25-2012 11:01 PM

All Orders Shipped w/ Updated Tracking!

Nutro 04-25-2012 11:20 PM

Price?

AutoAgenda 04-28-2012 12:06 AM

Quote:

Originally Posted by Nutro (Post 4866764)
Price?

$489.95 Shipped! PM or Post w/ Any Questions!

http://autoagenda.com/2010-camaro-6....old-air-intake


Macfolk 04-28-2012 10:31 PM

How does this compare to the Vararam?

Thanks,

Jason

AutoAgenda 04-30-2012 08:22 PM

Quote:

Originally Posted by Macfolk (Post 4882349)
How does this compare to the Vararam?

Thanks,

Jason

We do not have any direct comparisons, but both offer very impressive gains. On paper w/ manufacturers dyno results the New Era Performance Intake has the edge, but would love to hear customer results and experience.

AutoAgenda 05-08-2012 07:18 PM

PM or Post w/ Any Questions!

http://autoagenda.com/2010-camaro-6....old-air-intake

Tysen 05-09-2012 12:54 AM

Really nice, but a little more than I was looking to spend. I'll keep my eye on it in case the price drops.

AutoAgenda 05-09-2012 01:08 AM

Quote:

Originally Posted by Tysen (Post 4933374)
Really nice, but a little more than I was looking to spend. I'll keep my eye on it in case the price drops.

Certainly pricey but the performance is there. Dollar per HP is less than any other mod on the market. :thumbsup:

AutoAgenda 05-31-2012 04:31 PM

Customer Review: http://www.camaro5.com/forums/showthread.php?t=222495

AZ45TH 05-31-2012 08:58 PM

Does this work for the 2012? I read the Vararam doesn't because the radiator cap was moved.

AutoAgenda 06-05-2012 02:05 PM

Quote:

Originally Posted by AZ45TH (Post 5051977)
Does this work for the 2012? I read the Vararam doesn't because the radiator cap was moved.

New Era Performance has tested the intake on two 2012 SS models with no fitment issues whatsoever as well as no drive-ability issues on the stock tune. :thumbsup:

He11bent 06-05-2012 05:40 PM

No washer reservior removal/relocation required? Any other "adjustments" need to be accomplished for it to fit?

Thanks!

AutoAgenda 06-05-2012 06:05 PM

Quote:

Originally Posted by He11bent (Post 5077763)
No washer reservior removal/relocation required? Any other "adjustments" need to be accomplished for it to fit?

Thanks!

Correct, bolt right in!

He11bent 06-06-2012 01:36 AM

Thanks!

AutoAgenda 06-08-2012 05:31 PM

PM or Post w/ Any Questions!

Customer Review: http://www.camaro5.com/forums/showthread.php?t=222495

He11bent 06-10-2012 10:53 AM

My wife ordered mine earlier this week for father's day and its on back-order??

AutoAgenda 06-11-2012 02:01 AM

Quote:

Originally Posted by He11bent (Post 5101897)
My wife ordered mine earlier this week for father's day and its on back-order?? WTF?

Was it ordered from us? Don't see order here.

He11bent 06-11-2012 09:46 PM

Yup Order number # 11739

AutoAgenda 06-12-2012 02:04 AM

Quote:

Originally Posted by He11bent (Post 5109629)
Yup Order number # 11739

Yes, I handled your order. Our apologies for the Black Chrome finish being out of stock. New Era sold out of those the same day you ordered and we heard about it after placing your order with them. Your Intake will be shipping late next week. Let us know if you have any questions.

He11bent 06-12-2012 10:17 PM

Thanks for the follow-up. Can't wait!

AutoAgenda 06-14-2012 01:29 PM

Quote:

Originally Posted by He11bent (Post 5116768)
Thanks for the follow-up. Can't wait!

:thumbup:

AutoAgenda 06-19-2012 06:47 PM

PM or Post w/ Any Questions!

Customer Review: http://www.camaro5.com/forums/showthread.php?t=222495

Additional Information: http://autoagenda.com/2010-camaro-6....old-air-intake


All times are GMT -5. The time now is 09:03 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.