A Chef's Camaro
Attention: All rights reserved. Any and all photos/videos found within this thread may not be copied, edited, reproduced, linked, or displayed in any form or by any means; electronic, mechanical, optical, or otherwise, without prior written permission from myself. If you wish to use any of the photos/videos found within this thread please contact me.
!!!WARNING!!! This is a very picture heavy Journal. If you don't like pictures, you're out of luck.
"Penelope" is her name and idgaf if you care or not.
Gonna try and take the time to build a journal to help keep track of my progress. Feel free to reply and pm suggestions.
A very short back story: I've loved Camaro's since I was a young boy and always been a huge fan of all Amarican Muscle cars. Once I was in high school and first heard that they were going to re-manufacture the '10 Camaro I promised myself and all of my friends that I would own one someday. Through furious saving and help from my mommy I was able to purchase my very own 2012 1LS on January 13th, 2012. I bought her with a mere 134mi.
Followed Pictures are as she is Today!
AAC LED Blue Dome Light
AAC LED Blue Trunk Light
AAC LED Blue Foot well Lights
2013 1LE Suede Wrapped Steering Wheel w/ white trim
Custom Plasti-Dip Door panels White
Black Hurst Logo Shift Knob
Sound- x2 12" MTX 4500 Thunder subs
- 1600w Volfenhag Amp
- 1000w Power Acoustics Capacitor
MPD1 "Z Force" Ram Air Hood Painted SW
Rideskinz Aeroblade Low Profile Wing painted SW
SS Front Fascia Color Match SW w/ Lower Lip Blackout
ACS T4 Splitter
ACS Rear Bumper Extensions
ZL1 Side Rockers Wrapped in White Carbon Fiber Vinyl
20" RS Wheels Custom Painted Carbon Fiber w/ SW pinstripe
wrapped in Pirreli P-Zero's
AAC Fog light kit for non RS w/ Plasma Bulbs
AAC Concept Sidemarkers Ghosted Painted Summit White
Front Bowtie painted SW and Black
Bigworm Graphics Carbon Fiber Gills
MNP Customs Rear Fascia and Trunk Lid Vinyl Blackout in Carbon Fiber
MNP Customs Tail light smoke film set
MNP Customs Head light smoke film set -Turn signals ONLY-
MGP Brake Caliper Covers Painted SW w/ Black CAMARO lettering
PFADT Sport Front Sway bar
PFADT Sport Rear Sway Bar
PFADT Lowering Springs 1.5" Front and Rear
CAInc Cold Air Intake w/ lid glass removed to work w/ hood
Future Mod List:
AAC Retrofit Dual Halo Headlights
AAC Halo Fog Lights
Go Fast mods from Matt@FSP
?Custom Havoc CF Rear Diffuser with Quad Tips?
First picture is crappy yes, but the only picture I have from straight off the lot.
Once I ripped the front bowtie off I realized that the first thing I wanted on her was stripes, having a non-factory spoiler made that a little hard but the shop I went to (Tulsa CarFX) did a fantastic job and have helped me with a lot so far.
Having the immortalized "Mod Fever" along with wanting to spend all my income on mods was hitting me hard so I painted my front bowtie black and white and put it back on. Immediately following that I installed Oracle interior Dome LED, footwell LED, and trunk LED all in Blue.
Very Nice Start....
Good looking car and some well thought out ideas so far...
Saved up the money to get some new shoes and get rid of those fugly stock LS rims and tires. Got a set of 20" SS wheels from CarFX and they painted them to look like Carbon Fiber with a white Pinstripe around the edges, stuck some Pirrelli P'Zero's on them cause that's what she wanted and now she looks SOOO much better.
so i was reading in the forums about Plasti-Dip and wanting to try it out so on a forum high i went out and got a can at Lowes and started the conversion of my tail light bezels. First I took of the bezels which was surprisingly easy and managed not to break a single clamp which I was excited about, having larger hand was trickier for me to get the bottom side of the outside bezels out so I just stuck a shim in and forced them out. For as new as the car was i was really surprised at how dirty it was underneath the bezels, even managed to find a helicopter in there lol. So i got the bezels taped off and ready to be painted, while my first two soft coats of plasti-dip were drying i decided to remove the dealership sticker from the back bumper so its nice and clean now. Finished up painting about 10mins before it started to rain thank God, but immediately had to go to work. Got home from work about an hour ago and was able to pop the Bezels right back in and they look soooo much better. spending time on this forum is definitely benefiting my build.
You should look into painting your brake calibers I think it would look real good with your new wheels. G2 has a good kit that is about 50 bucks I think and they have a bunch of colors. Just an idea :) good luck with the build
Love the rims in CF.
Looks killer, BTW, what rear spoiler is that, it looks bad ass!
Plasti-Dip Day 2!
With how great my bezels turned out I was stoked to try and paint the trunk cover (idk what to call it?) so i woke up early this morning and busted out some tape, newspaper, and plasti-dip. Took me 40mins alone just to make sure my top line was as straight as possible. i love the new look of it though, so happy i was introduced to plasti-dip.
Been a While
Been a couple months since i've gotten a chance to update. So here it Goes!
First off got my cold air intake from CAI installed, got my Hurst STS but cant install it yet, got my Fog Lights from AAC installed and DIY Painted my steering wheel bezel
|All times are GMT -5. The time now is 03:32 AM.|
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.