Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   V8 Bolt-Ons & Tunes (http://www.camaro5.com/forums/forumdisplay.php?f=78)
-   -   Stainless Works & SP Headers | Best Prices | Free Shipping | JDP Motorsports (http://www.camaro5.com/forums/showthread.php?t=239919)

JDP Sales 07-26-2012 02:48 PM

Stainless Works & SP Headers | Best Prices | Free Shipping | JDP Motorsports
 
Hi Everyone!

JDP Motorsports is proud to use and offer Stainless Works headers and exhaust! Featuring CNC mandrel bent tubing from high quality 304 stainless steel, these headers will last a lifetime. We have installed many sets of headers here at JDP and the SW headers fit great and make excellent power. By installing Stainless works headers on your SS or ZL1 Camaro you'll also gain an aggressive tone at idle and a beast at wide open throttle! :headbang:

Factory Connection: These systems are designed to connect to a factory or any aftermarket exhaust system.

http://www.jdpmotorsports.com/media/...a11hdror_3.jpg

Stainless Works - 1 7/8" x 3" Long Tube Headers w/out Cats - 2010-2015 Camaro SS/ZL1 - SWS-CA11HORST


Stainless Works long tube headers without cats for the 2010-2015 Camaro SS and 2012-2015 Camaro ZL1 features 304 stainless steel CNC mandrel-bent 1 7/8" primaries, 3" collectors, welded o2 bungs, o2 extenders, a 3" lead pipes, along with all the necessary hardware and gaskets for a bolt-on installation.

Note: System will delete your catalytic converters and is for off road use only.

Stainless Works - 2" x 3" Long Tube Headers w/out Cats - 2010-2015 Camaro SS/ZL1 - SWS-CA11HOR

Stainless Works long tube headers without cats for the 2010-2015 Camaro SS and 2012-2015 Camaro ZL1 features 304 stainless steel CNC mandrel-bent 2" primaries, 3" collectors, welded o2 bungs, o2 extenders, 3" lead pipes, along with all the necessary hardware and gaskets for a bolt-on installation.

Note: system will delete your catalytic converters and is for off road use only.

Product Features
- Tig welded 304 stainless
- CNC mandrel-bent primary tubes
- Welded o2 Bungs with o2 Extenders
- Ball flange collector for great leak free performance
- Gaskets and hardware included for a complete installation
- Made in the USA!
- Free Shipping to the Lower 48!

MSRP: $1,325.00
Sale $1,192.50

http://www.jdpmotorsports.com/media/...hdrcat_1_1.jpg

Stainless Works - 1 7/8" x 3" Long Tube Headers w/Cats - 2010-2015 Camaro SS/ZL1 - SWS-CA11HCATST

Stainless Works long tube headers with cats for the 2010-2015 Camaro SS and 2012-2015 Camaro ZL1 features 304 stainless steel CNC mandrel-bent 1 7/8" primaries, 3" collectors, welded o2 bungs, o2 extenders, high flow catalytic converters, and 3" lead pipes, along with all the necessary hardware and gaskets for a bolt-on installation.

Stainless Works - 2" x 3" Long Tube Headers w/Cats - 2010-2015 Camaro SS/ZL1 - SWS-CA11HCAT

Stainless Works long tube headers with cats for the 2010-2015 Camaro SS and 2012-2015 Camaro ZL1 features 304 stainless steel CNC mandrel-bent 2" primaries, 3" collectors, welded o2 bungs, o2 extenders, high flow catalytic converters and 3" lead pipes, along with all the necessary hardware and gaskets for a bolt-on installation.

Product Features
- Tig welded 304 stainless
- CNC mandrel-bent primary tubes
- Welded o2 bungs with o2 extenders
- Ball flange collector for great leak free performance
- Gaskets and hardware included for a complete installation
- Made in the USA!
- Free Shipping to the Lower 48!


MSRP: $1,525.00
Sale $1,372.50


Performance Connections: Can only be used with Stainless Works connection exhaust system.

http://www.jdpmotorsports.com/media/...11hdr3orst.jpg

Stainless Works - 1 7/8"x3" LT Headers w/out Cats for SW Exhaust - 2010-2015 Camaro SS/ZL1 - SWS-CA11H3ORST

Stainless Works long tube headers for the 2010-2015 Camaro SS and 2012-2015 Camaro ZL1 features 304 stainless steel CNC mandrel-bent 1 7/8" primaries, 3" collectors, welded o2 bungs, o2 extenders, and 3" off road lead pipes to fit Stainless Works exhaust systems.

Note: This system does not neck down and only fits the Stainless Works performance connect exhaust.

Stainless Works - 2" x 3" LT Headers w/out Cats for SW Exhaust - 2010-2015 Camaro SS/ZL1 - SWS-CA11H3OR


Stainless Works long tube headers for the 2010-2015 Camaro SS and 2012-2015 Camaro ZL1 features 304 stainless steel CNC mandrel-bent 2" primaries, 3" collectors, welded o2 bungs, o2 extenders, and 3" off road lead pipes to fit Stainless Works exhaust systems.

Note: This system does not neck down and only fits the Stainless Works performance connect exhaust.

Product Features
- Tig welded 304 stainless steel
- CNC mandrel-bent primary tubes
- Welded o2 bungs with o2 extenders
- Ball flange collector for great leak free performance
- Gaskets and hardware included for a complete installation
- Made in the USA!
- Free Shipping to the Lower 48!


MSRP: $1,325.00
Sale $1,192.50

http://www.jdpmotorsports.com/media/...1hdr3catst.jpg

Stainless Works - 1 7/8"x3" LT Headers w/Cats for SW Exhaust- 2010-2015 Camaro SS/ZL1 - SWS-CA11H3CATST

Stainless Works long tube headers with cats for the 2010-2015 Camaro SS and 2012-2015 Camaro ZL1 features 304 stainless steel CNC mandrel-bent 1 7/8" primaries, 3" collectors, welded o2 bungs, o2 extenders, high flow metal matrix catalytic converters, and 3" lead pipes to fit Stainless Works exhaust systems.

Note: This system does not neck down and only fits the Stainless Works performance connect exhaust.

Stainless Works - 2" x 3" LT Headers w/Cats for SW Exhaust - 2010-2015 Camaro SS/ZL1 - SWS-CA11H3CAT

Stainless Works long tube header with cats for the 2010-2015 Camaro SS and 2012-2015 Camaro ZL1 features 304 stainless steel CNC mandrel-bent 2" primaries, 3" collectors, welded o2 bungs, o2 extenders, high flow metal matrix catalytic converters, and 3" lead pipes to fit Stainless Works exhaust systems.

Note: This system does not neck down and only fits the Stainless Works performance connect exhaust.

Product Features
- Tig welded 304 stainless steel
- CNC mandrel-bent primary tubes
- Welded o2 bungs with o2 extenders
- Ball flange collector for great leak free performance
- Gaskets and hardware included for a complete installation
- Made in the USA!
- Free Shipping to the Lower 48!


MSRP: $1,525.00
Sale $1,372.50

WE INSTALL PARTS!!
If you are looking to have work performed or have one of our packages installed on your vehicle, we have a facility in Sandy, Utah where we perform everything from bolt-on installations, Dyno testing/tuning and complete race car builds. Our install shop fills up fast, so please call us to set up an appointment.

Best regards,

Kayla L.
801.545.4215

JDP Sales 01-22-2013 02:59 PM

In stock and ready to rock! :headbang: These headers are excellent quality, and one of the best bang for the buck performance mods you can do to your Camaro! Please feel free to call, PM or email me with questions.

Best regards, :chevy:

Tyler
888-308-6007

JDP Sales 03-20-2013 04:59 PM

:bump:

Please feel free to call, PM or email me anytime with questions or pricing!

Best regards,

Tyler
888-308-6007

JDP Sales 04-03-2013 03:07 PM

Hey guys, just wanted to let you know, we also carry Stainless Power products at excellent prices! Please feel free to call, PM or email me with questions or pricing! Have a great day!

Best regards,

Tyler
888-308-6007

JDP Sales 04-17-2013 06:29 PM

Thanks for the orders and support Camaro5! Please feel free to call, PM or email me anytime with questions or Camaro5 pricing!

Best regards,

Tyler
888-308-6007

JDP Sales 05-10-2013 06:29 PM

Thanks for the orders guys! We truly appreciate the business and support! Please feel free to call, PM or email me anytime with questions or Camaro5 Pricing!! :thumb:

Best regards,

Tyler
888-308-6007

3GPa 05-20-2013 12:22 PM

Whoa!
 
Tyler,

Installed my Stainless Works Long Tube Headers this week end. I could not be happier. Installation was very good, the kit is the best.
They sound awesome, I felt the hp immediately. They are quieter inside, no more drone at 1800 rpm. They are killer when you get on it!

Thanks,

Gus

JDP Sales 05-20-2013 02:28 PM

Quote:

Tyler,

Installed my Stainless Works Long Tube Headers this week end. I could not be happier. Installation was very good, the kit is the best.
They sound awesome, I felt the hp immediately. They are quieter inside, no more drone at 1800 rpm. They are killer when you get on it!

Thanks,

Gus
That is great to hear Gus! Thats really cool to hear about the drone! I am glad you are enjoying them! Did you happen to get any pics?

I appreciate your business and support! Please let me know if I can help you with anything in the future!

Best regards,

Tyler
888-308-6007

3GPa 05-20-2013 03:11 PM

Quote:

Originally Posted by Sales@JDP (Post 6566686)
That is great to hear Gus! Thats really cool to hear about the drone! I am glad you are enjoying them! Did you happen to get any pics?

I appreciate your business and support! Please let me know if I can help you with anything in the future!

Best regards,

Tyler
888-308-6007

Yes, I will post pictures and short video soon....

SWAG1LE 05-20-2013 03:44 PM

:pop2:

3GPa 05-21-2013 12:26 PM

http://www.ptlsbg.com/LedHeaders/IMG_9322a.jpg
http://www.ptlsbg.com/LedHeaders/IMG_9323a.jpg
http://www.ptlsbg.com/LedHeaders/IMG_9324a.jpg
http://www.ptlsbg.com/LedHeaders/IMG_9328a.jpg
http://www.ptlsbg.com/LedHeaders/IMG_9332a.jpg

MOVIE CLIPhttp://www.ptlsbg.com/LedHeaders/Headers.mp4

JDP Sales 05-22-2013 02:53 PM

Looks good and sounds even better! BTW, I really like the MBRP tips with the GFX! :thumb:

Best regards,

Tyler
888-308-6007

3GPa 05-22-2013 04:50 PM

Quote:

Originally Posted by Sales@JDP (Post 6575498)
Looks good and sounds even better! BTW, I really like the MBRP tips with the GFX! :thumb:

Best regards,

Tyler
888-308-6007


Good eye.

Thanks

JDP Sales 05-29-2013 07:42 PM

All PM's and emails have been replied to! Thanks for the interest and support Camaro5! Please feel free to call PM or email me anytime with questions.

Best regards,

Tyler
888-308-6007


All times are GMT -5. The time now is 03:38 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.