Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   2012 Camaro5 Fest (III) (http://www.camaro5.com/forums/forumdisplay.php?f=153)
-   -   Dont hate the Shelby (http://www.camaro5.com/forums/showthread.php?t=240946)

Barton Industries 07-31-2012 05:02 PM

Dont hate the Shelby
 
Hey Everyone,
We will be attending Camaro5fest once again. We didn't know for sure if we were going to make it or not, but we will be there.
We will have our BARTON short throw shifters there along with our pistol grip knobs. My 2010 Camaro will be open at our booth for anyone to hop in and try out the shifter.
I will also have my 2013 Shelby GT500 there, but don't hate.:paddle: I needed another car to haul stuff down with. Last year at Mustang Week, I brought my Camaro for the same reason.:thumbup:

See everyone in a couple days,
Dave

Dznts 07-31-2012 05:27 PM

Can't wait to see that Shelby!

M Miller69 07-31-2012 05:33 PM

A SHELBY AT CAMAROFEST!!!!!!!!!!!.:paddle: LOL. just kidding, even the Mustang haters, deep inside will have to admit the is Shelby is an awesome car.

Mindz 07-31-2012 06:25 PM

Both cars look sleek and aggressive. I didn't get to meet you guys last year because you parked both cars way away from everyone off in a corner. I'll make sure I'm come say hello this year.

PQ 07-31-2012 06:26 PM

Are you guys planning on running the Shelby on the strip? :popcorn:

rocketman 12 07-31-2012 06:38 PM

Quote:

Originally Posted by Dznts (Post 5373889)
Can't wait to see that Shelby!

Ditto, Shelby's ROCK!:headbang:

Quote:

Originally Posted by PQ (Post 5374157)
Are you guys planning on running the Shelby on the strip? :popcorn:

please, please, please! :popcorn::popcorn:

skar 07-31-2012 06:42 PM

? Do the Barton's have a nylon or ? For a bushing . Do they get sloppy with use like the other brand.

xSSkier874 07-31-2012 09:07 PM

Quote:

Originally Posted by skar (Post 5374215)
? Do the Barton's have a nylon or ? For a bushing . Do they get sloppy with use like the other brand.

I have one of their shifters from the original pre-order, it's as smooth as the day I put it in about 2 1/2 years ago. They sell quality stuff and at an awesome price.

Deke736 07-31-2012 09:22 PM

Quote:

Originally Posted by PQ (Post 5374157)
Are you guys planning on running the Shelby on the strip? :popcorn:

That would be awesome!

Earthshaker6 07-31-2012 09:32 PM

Quote:

Originally Posted by Barton Industries (Post 5373762)
I will also have my 2013 Shelby GT500 there, but don't hate.:paddle:
See everyone in a couple days,
Dave

Who's hating? Not I! ;)

Barton Industries 08-01-2012 07:48 AM

We should be getting in sometime tonight or 1st thing tomorrow. I have an 11.5 hour drive and I'm still assembling shifters.

Skar- We use PTFE for the bushings, but the other brand does not have a problem with the Material they use, it's that they don't have enough wall thickness and they groove the face which makes them very prone to wear.

I wish I could run it at the strip, but Im to far from home to risk something happening. At least with the Camaros you will be able to get parts at the show if you break. I would be out of luck.

Thanks for the positive comments guys, I feel a little better about it.

khislop007 08-01-2012 08:00 AM

Quote:

Originally Posted by Barton Industries (Post 5376397)
We should be getting in sometime tonight or 1st thing tomorrow. I have an 11.5 hour drive and I'm still assembling shifters.

Skar- We use PTFE for the bushings, but the other brand does not have a problem with the Material they use, it's that they don't have enough wall thickness and they groove the face which makes them very prone to wear.

I wish I could run it at the strip, but Im to far from home to risk something happening. At least with the Camaros you will be able to get parts at the show if you break. I would be out of luck.

Thanks for the positive comments guys, I feel a little better about it.

Oh man, no faith in the FORD!? :sm0: Just kidding!

I already have your shifter but I may pick up just the flat stick. :thumbsup:

RADREVX 08-01-2012 08:17 AM

Shelby is a kick ass car

AdamZ 08-01-2012 03:59 PM

:paddle:

Neumatic 08-01-2012 05:15 PM

Even with it being a Ford, the Shelby is a badass car. Id never own one myself(even if I had enough money haha) but that doesn't mean I can't appreciate such an amazing machine.


All times are GMT -5. The time now is 04:35 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.