Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Local Marketplace (http://www.camaro5.com/forums/forumdisplay.php?f=121)
-   -   Syclone / Typhoon engine parts (http://www.camaro5.com/forums/showthread.php?t=257345)

Green2SS/RS 10-24-2012 09:53 AM

Syclone / Typhoon engine parts
 
I have Syclone / Typhoon engine parts for sale. PM me with any questions you may have and I will get back to you as soon as I can. $8500.00 takes it all, this is almost a complete engine does not need much more to run.

Fully machined Typhoon block with splayed 4 bolt mains and .030 over $600
Used stock Typhoon cylinder heads unassembled $300
New Brodix aluminum cylinder heads (valve seats need to be cut) $1300
Used ported lower intake manifold $250
Used half ported upper intake manifold $250
New custom cam and valve springs $360
New valve retainers $40
Used stock pushrods $40
Used stock roller lifter guides $40
New hydraulic roller lifters $150
Used Kenne Bell headers and cross over pipe with external waste gate flange all ceramic coated and not used after coating $800
New stock down pipe $100
New stock cross over pipe $200
Balanced rotating assembly with stock crank shaft, new Ross dished pistons, stock rods, new rings, new bearings, new flex plate, and new fluidamper street balancer $2000
New ITS turbo GT66 stainless ball bearings .81 ceramic coated exhaust housing $1800
New braided turbo drain line $80
New (6) 75# injectors $350
New billet fuel pressure regulator $110
Used stock throttle body with foil $80
Plus other random brackets and hoses that Iím not sure what they are for but came off this engine.

Here is a link to the pics.


http://s742.beta.photobucket.com/use...yphoon%20parts


All times are GMT -5. The time now is 05:59 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.