Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Sponsors Camaro Builds / Project Cars (http://www.camaro5.com/forums/forumdisplay.php?f=151)
-   -   Vengeance built 415 cubic inch F1A ProCharged '12 Camaro SS!! (http://www.camaro5.com/forums/showthread.php?t=260660)

Ryan_at_V 11-13-2012 11:24 AM

Vengeance built 415 cubic inch F1A ProCharged '12 Camaro SS!!
 
This 2012 Camaro SS lived a short life of only 4 miles before it was stripped of its "factory provided" power and driveline! The owner called us after purchasing this car and had it delivered to our shop for a complete VENGEANCE makeover!!http://www.ls1tech.com/forums/images...ch/gr_grin.gif I'll let the details and pictures below do all the talking for this INCREDIBLE 5th gen!


ENGINE:
VR 415 cubic inch stroker
Callies Compstar Crankshaft
Callies Compstar Connecting Rods
Diamond Custom Pistons
VR Custom Camshaft
Katech C5R Timing Chain
VR Dual Spring Kit w/ Ti Retainers
Comp Trunion Kit
Melling HV Oil Pump
VR Custom Valve Covers
ATI Damper


FUEL SYSTEM:
VR Custom Spec Fuel Sytem
LPE Twin In Tank Pumps
VR Billet Fuel Rail Kit
Flow Matched/Balanced/Tested Injectors to 80lb/hr


DRIVETRAIN:
RPS Street Twin Carbon Full Clutch Kit
Drive Shaft Shop 9" Rear Conversion Kit


SUPERCHARGER SYSTEM:
ProCharger F1A Race Kit
12 Rib Upgrade
Air to Air Intercooler
Snow Performance Stage III Meth Injection System


EXHAUST:
ARH 1 7/8" Long Tube Headers w/ Non-Catted Xpipe
ARH Catback Exhaust


SUSPENSION:
Pfadt Race Engineering Lowering Springs


EXTERIOR:
VFN COPO Bolt On Hood
Weld RTS Wheels 17x10 Rear / 17x5 Front
Mickey Thompson Drag Radial Tires


At the customers request, there are no Dyno Graphs to be shown yet! I believe he has a few grudge races that need to be settled firsthttp://www.ls1tech.com/forums/images...ch/gr_wink.gif


VIDEOS:


Idle/Rev Clip from rear of car










Still in the factory plastic! Here's a couple pics after the new COPO hood was installed!
http://i1107.photobucket.com/albums/...E/IMG_6892.jpg









Here's a few of the finished product!
http://i1107.photobucket.com/albums/...E/IMG_7260.jpg





























A race car feel with all the luxury of a new car's interior!
http://i1107.photobucket.com/albums/...E/IMG_7295.jpg


The NEW Heart Beat of this Camaro SS!
http://i1107.photobucket.com/albums/...E/IMG_7297.jpg










PfadtRacing 11-13-2012 12:03 PM

Great build guys! It sure looks great!

MR 45TH 11-13-2012 12:17 PM

Love it! Great job :thumbup:

willhe64 11-13-2012 12:23 PM

Dyno numbers?

MANNYS2SS/RS 11-13-2012 01:45 PM

AWESOME BUILD

SSBUSDRVR 11-13-2012 01:52 PM

Great job:clap: Thanks for posting the pix Ryan.:)

blown5thgen 11-13-2012 02:08 PM

Not sure if I'm reading right, but it's pretty much got stock suspension?????

Ryan_at_V 11-13-2012 03:56 PM

Yes sir! Minus the lowering springs! FUN right?? :)

octane 11-14-2012 02:39 PM

copo hood
 
How much is that hood and where to get it ?? thanks ! nice build but he will need suspension to get that to hook huh?

2010 SSRS 11-14-2012 02:45 PM

awesome build, there is nothing better than the sound of a Procharger, I Love It :headbang:

SGT Stretch 11-14-2012 02:59 PM

Quote:

Originally Posted by octane (Post 5808101)
How much is that hood and where to get it ?? thanks ! nice build but he will need suspension to get that to hook huh?

+1

I've always been a fan of big cowled hoods and would like to know how to get my hands on one.

Ryan_at_V 11-19-2012 03:28 PM

Go to VFN's website to get your COPO hood! :)

Ryan_at_V 12-03-2012 05:51 PM

TTT!!! Thanks for all the awesome comments guys!! I believe we ALL love the COPO hood!

SGT Stretch 12-03-2012 06:40 PM

Quick question on that vfn copo hood. How was the fitment? How much work did it need to get the lines right? Thanks

ChevyGuySS 12-03-2012 07:42 PM

:emoticon17:

Ryan_at_V 12-04-2012 12:37 PM

Quote:

Originally Posted by SGT Stretch (Post 5875335)
Quick question on that vfn copo hood. How was the fitment? How much work did it need to get the lines right? Thanks


Fitment was great! As with any aftermarket hood, there is some "tweaking" to get it just right!

roshanill 12-06-2012 03:24 AM

This 2012 Camaro SS lived a short life of only 4 miles before it was stripped of its "factory provided" power and driveline! The owner called us after purchasing this car and had it delivered to our shop for a complete VENGEANCE makeover!!

badcompany 12-06-2012 09:43 AM

haha, thats awesome, take that bitch back to the dealer with the plastics, and window stickers on it and bring it to the service department, and tell them, ya i think there something wrong with my car, its very loud all of a sudden and it shakes and vibrates really bad.

Ryan_at_V 12-06-2012 11:49 AM

Quote:

Originally Posted by badcompany (Post 5885335)
haha, thats awesome, take that bitch back to the dealer with the plastics, and window stickers on it and bring it to the service department, and tell them, ya i think there something wrong with my car, its very loud all of a sudden and it shakes and vibrates really bad.


:laughabove::laughabove::laughabove: LOVE it!!!

01pewterz28 12-06-2012 04:11 PM

Great work for a kick A$$ shop

Ivan @ Southwest Speed 12-06-2012 04:43 PM

Love that hood! Car looks so badass!

Well done fellas!
Ivan

Ryan_at_V 12-10-2012 03:02 PM

TTT!!!

djw32 10-05-2013 03:01 PM

Beautiful car!

Any chance the owner wouldn't mind allowing the op to post the dyno sheet?

MiniSuperDuke 06-22-2014 03:34 AM

This is an old thread, but that is a bad ass ride. Anybody know where that car is now and how its running?

Sent from my SM-G900V using Tapatalk


All times are GMT -5. The time now is 03:59 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.