Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums -

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - (
-   Member Car Journals (
-   -   "To Do" list #2 (

SamHouseIII 11-19-2012 11:16 AM

"To Do" list #2
I wanted to split this off from my original to do list since this is a new Mod is the new list for my 2013 CRT ZL1 #1040.

To Do list #2

(Parts on order and waiting for shipment)

(Waiting to be installed)

Apex Catch can (swapping out my Elite Engineering one)
Gorilla Wheel locks
Fiberglass Splash Guards (Swapping out the old plastic ones)
Carbon Fiber Supercharged Aluminum Emblems (not sure if I will use these)
Billet Side Gills replace the chipped paint ones..
APR Carbon fiber front bumper splitter
Pedders ZL1 Sway Rear (not sure if I will install)
Pfadt Tri-Y headers with high flow cats and Free tune from JRE
Night Owl DRL RGB LEDs
Seibon front Carbon Fiber Splitter
Seibon Rear Carbon Fiber Spoiler
Seibon Carbon Fiber Cooling Plate
No Weeds Cut outs
Black Front Splitter washers
Lower quarter panel ZL1 mat black stripes
JDPM Stage II Clutch/Brake reservoir
BMR Front and Rear ZL1 Spec Sway Bars
Taylor 409 Pro Race 10.4mm Spark Plug Wires


Factory Sub
Underhood LED lights
Trunk LEDs
Oracle Sidemarkers LEDs
Hurst “Old School” Pistol Grip Shifter
Map light LEDs
Highlighted CRT lettering on Rims
Billet valve stem covers
Manual Mild to Wild switch
Painted Strut tower bar
Tecnostalgia full LED tail lights Gen2
Tinted Windows
Elite Engineering Oil Catch Can
Billy Boat ZL1 Dual Mode Exhaust
ZL1 Emblem for Strut tower
Satin Nickel Fuel door
Black Gill Inserts (defenderworxs)
Carbon Fiber Door sills
ZL1 Factory Stripes (Grey)
No Tune Roto Fab ZL1 Air Intake System (Carbon Fiber finish, Black Hoses and CRT air box)
Carbon Fiber Bowties
Heritage Grill with bowtie (CRT)
Ofers DRL ZL1 Harness
Oracle ZL1 Plasma DRL and Fog lights
Oracle Concept mirrors (Carbon Fiber)
MSD Shift light
Red LED over tailpipe exhaust tips.
ZL1 Console cover
Coverking full set seat covers.
Clear bra
Hurst 3916030 Billet Plus short throw shifter
Hurst 3326030 Pit Pack Ext Duty Bushing
Hurst 5388665 Hard Drive Stick
Black emblem nameplate letters
D3PE Camaro ZL1 High Capacity Water Reservoir
D3PE Camaro ZL1 Heat Exchanger
Black Camaro lettering

2012-2013 Camaro ZL1 JRE "Tune" Edition 75 RWHP Package
Includes: 10% Crank Pulley, ATI Balancer, APR crank bolt
Livewire SCT Tuner (with JRE Custom Tune), Proper Size Belt for 10% Crank Pulley.
Big Gulp Scoop and Washer Bottle relocation kit.

I will post Pics as the Mods are installed or updated.

SamHouseIII 11-19-2012 02:59 PM

1 Attachment(s)
Factory Fresh!

SamHouseIII 11-19-2012 03:04 PM

2 Attachment(s)
Sub Installed

SamHouseIII 11-19-2012 03:07 PM

3 Attachment(s)
Underhood and Trunk LEDs

I used a plunge switch and bypass switch to control the under hood LEDs.

SamHouseIII 11-19-2012 03:12 PM

1 Attachment(s)
Oracle Sidemarkers LEDs

SamHouseIII 11-19-2012 03:14 PM

2 Attachment(s)
Hurst Pistol Grip Shifter

SamHouseIII 11-19-2012 03:15 PM

1 Attachment(s)
Rim Lettering

SamHouseIII 11-19-2012 03:17 PM

1 Attachment(s)
Manual Mild to Wild switch.

SamHouseIII 11-19-2012 03:18 PM

2 Attachment(s)
Painted Strut Bar

SamHouseIII 11-19-2012 03:21 PM

1 Attachment(s)
Technostalgia full LED tail lights

SamHouseIII 11-19-2012 03:22 PM

1 Attachment(s)
Window Tint

Jeffm 11-19-2012 04:55 PM

great lookin bud

Denis 11-19-2012 05:04 PM

Awesome!! Keep it up.

SamHouseIII 11-19-2012 09:29 PM

1 Attachment(s)
Got my DRL harness in.

SamHouseIII 11-21-2012 03:32 PM

Added two new ones to the list.

Carbon Fiber bow tie and Door Sills

Denis 11-21-2012 03:37 PM


Originally Posted by SamHouseIII (Post 5832587)

I have the bow ties. I like em a lot! I'm curious to see how'd they would look in the ZL1 grill. I'm thinking about switching to it.

2010 SSRS 11-21-2012 03:40 PM

your ZL1 looks great

SamHouseIII 11-22-2012 01:39 PM

3 Attachment(s)
Catch Can Installed

Kartashian 11-22-2012 04:09 PM

Nice mods!! keep up the good work.

SamHouseIII 11-26-2012 03:24 PM

1 Attachment(s)
Got my ZL1 emblem for the sturt bar brace today!

Made in the good old U. S. of, wait does that say Korea?

LED Crazy 11-26-2012 05:36 PM

Looks good Sam

SamHouseIII 11-26-2012 08:33 PM

3 Attachment(s)
Got more Goodies today!!

Kronix 11-26-2012 09:19 PM

First thing I would've done is get rid of that dealer shit on the back of your bumper. They're not paying you to advertise are they? You're headed in the right direction.

Pep Boys Skull Caps :facepalm:

2LTvert 11-26-2012 09:28 PM

:drool: Great looking ZL1! :bow:

SamHouseIII 11-26-2012 09:37 PM


Originally Posted by Kronix (Post 5849353)
First thing I would've done is get rid of that dealer shit on the back of your bumper. They're not paying you to advertise are they? You're headed in the right direction.

Pep Boys Skull Caps :facepalm:

Hate to say it, but you be right :word: Guess I will remove it when it gets warm again.

All times are GMT -5. The time now is 06:20 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.