Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) (http://www.camaro5.com/forums/forumdisplay.php?f=76)
-   -   V6 Twin Disc Clutch (http://www.camaro5.com/forums/showthread.php?t=279445)

sycraft 02-26-2013 11:45 AM

V6 Twin Disc Clutch
 
1 Attachment(s)
Just a little hint of whats coming to the V6 crowd- twin disk, more on manufacturer when tested and installed......

v6sonoma 02-26-2013 12:07 PM

I'm sure there will be a lot of :popcorn: here shortly. :laugh:

chevy 3 02-26-2013 12:17 PM

Oooooo boy! Lets role. I like this a lot

spyder 02-26-2013 12:27 PM

subscribed!

Monchy36 02-26-2013 12:46 PM

So pretty!!!:drool:

elpatofeo 03-04-2013 06:16 PM

I wonder how much this will cost and when it will be ready...I'm in need of a clutch now.

sycraft 03-04-2013 07:17 PM

Soon. About 1100.00 is targeted

khabboub 03-11-2013 01:12 AM

oh man. i am already riding on my third clutch. i want something aftermarket. i want something better

VEESIKS 05-03-2013 08:22 PM

Bump for an update??

sycraft 05-04-2013 02:11 AM

I have it in hand, Install on Monday for Camaro Now Fall Article with other upgrades, wont be able to say too much until article comes out.

lscamaro 05-04-2013 03:19 AM

I thought IPF could build aftermarket clutches already? I know hbmike and sixjak already run aftermarket stronger clutches

Lil' Nasty 05-04-2013 08:08 AM

Looks nice bud!

sycraft 05-04-2013 08:19 AM

I can tell you it will hold more power that I will ever need, 9.5 inch twin disk with a billet flywheel, and it has something the OE and other clutches do not have...... providing a higher level of reliabilty with the design addition, more of that in the article....

Matt @ FSP 05-04-2013 11:22 AM

Quote:

Originally Posted by sycraft (Post 6503469)
I can tell you it will hold more power that I will ever need, 9.5 inch twin disk with a billet flywheel, and it has something the OE and other clutches do not have...... providing a higher level of reliabilty with the design addition, more of that in the article....

Two more days!... We'll be installing this in sycraft's car. Look for the magazine article later this year, but we'll be documenting some pictures for you guys on the forums here.:popcorn:

Lil' Nasty 05-04-2013 11:45 AM

Sorry if its in another thread Clint but can you tell us how much lighter it is vs stock? :)

sycraft 05-04-2013 01:15 PM

will have to weigh them to get a true weight

sycraft 05-07-2013 03:55 PM

1 Attachment(s)
Press Release

VEESIKS 05-10-2013 07:44 PM

Did you get the weight difference?

Matt @ FSP 05-10-2013 08:22 PM

I believe Rodney, Clint or Justin has that information, it was significant for rotating mass.. I was not paying good attention when they weighed them!

sycraft 05-10-2013 08:38 PM

It was considerable, but should not scoop the article

RenegadeSS 05-10-2013 09:00 PM

Im buying this as soon as its available. I could care less about the weight.

sycraft 05-10-2013 09:57 PM

Its available, call ram and tell them Clint sent you, ask for mike norcia

RenegadeSS 05-10-2013 10:16 PM

Will do :thumb:

JohnnyBfromPeoria 06-12-2013 03:24 PM

Bump.

Vader2011v6 06-18-2013 09:16 PM

How did this clutch hold up to your at sycraft? I maybe I the need for a new clutch soon.when I heat up my clutch at the track my car wouldn't go into 3rd and straight to 5th. I'm getting my ideal garage master cylinder and taking out my short shifter hopefully after that my car will be better if not then the clutch maybe the next thing to change.


All times are GMT -5. The time now is 06:19 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.