Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Cosmetics and Lighting Modification Discussions (http://www.camaro5.com/forums/forumdisplay.php?f=37)
-   -   Painted Calipers (http://www.camaro5.com/forums/showthread.php?t=28284)

1stinmichigan 06-19-2009 10:14 AM

Painted Calipers
 
Was wondering if anyone had any advice on getting the Calipers on my Red RS painted Red. I am not really the type to do it myself, looking for a place in Michigan to do it. Also any idea on price?

Thanks in Advance....

irocnroll 06-19-2009 10:43 AM

Quote:

Originally Posted by 1stinmichigan (Post 599618)
Was wondering if anyone had any advice on getting the Calipers on my Red RS painted Red. I am not really the type to do it myself, looking for a place in Michigan to do it. Also any idea on price?

Thanks in Advance....

Its so easy to do your self. If you have a jack and a tire iron, just purchase the paint that comes with the brush. Dont buy the spray on stuff, it makes too much of a mess with over spray. The brush is so easy to use a kindergardener could do it. I have done it many times on all of my cars. Buy the stuff by G2.

blackedout010 06-19-2009 10:46 AM

i know adm performance had a post on here where they are offering an exchange and can pwdercoat calipers. they looked really good from what i saw. do a search

1stinmichigan 06-19-2009 10:56 AM

Thanks guys...

mickss 06-19-2009 11:29 AM

Powder coating is another option you might want to consider. Eastwood sells do-it-yourself kits for a reasonable price. I`ve used it with good results and if I can do it without screwing it up, then I`m pretty anyone can do it. :wave:
http://www.eastwood.com/original-hot...ing-gun-1.html

1stinmichigan 06-19-2009 11:16 PM

That doesn't look too bad either. Easier I would think...

Blacc Mamba 06-20-2009 12:11 AM

http://www.camaro5.com/forums/showthread.php?t=17244

eric0353 09-11-2011 06:30 PM

mikess... do you have pictures of what the Eastwoods kit turned out like on your calipers?


All times are GMT -5. The time now is 05:51 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.