Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Camaro Z/28 Forum - Z/28 Specific Topics (http://www.camaro5.com/forums/forumdisplay.php?f=136)
-   -   Would you modify a Z28 ? (http://www.camaro5.com/forums/showthread.php?t=285393)

ACS Composite 03-27-2013 01:46 PM

Would you modify a Z28 ?
 
1 Attachment(s)
What do you guys think, would you touch a Z28 !

Bhobbs 03-27-2013 01:48 PM

Cam and exhaust is about all you need. It's good the brakes, aero, seats and wheels and tires.

Kelly@PCMofNC 03-27-2013 01:50 PM

Obviously. I can't leave ANYTHING alone.

Drew10 03-27-2013 01:50 PM

Quote:

Originally Posted by ACS Composite (Post 6343157)
What do you guys think, would you touch a Z28 !

I'd touch all over it. :D

2010 SSRS 03-27-2013 01:52 PM

Quote:

Originally Posted by Drew10 (Post 6343194)
I'd touch all over it. :D

:thumbup: me too :D

DuskSS 03-27-2013 01:52 PM

It's a stripped race car of course I would if I'm gonna give up my comforts the car is going to be a monster.

I won't buy one though I'd sooner buy a stripped chassis and make the same thing for cheaper

Sent from my SPH-L900 using Tapatalk 2

Mojave 03-27-2013 01:55 PM

Of course. You know what they say about idle hands

LOWDOWN 03-27-2013 01:57 PM

Joseph, since you're asking:

1) Proper/efficient front brake ducting
2) ..."........."....... hood/heat venting
3) "Leno" rear 1/4 brake ducts/ducting

ACS Composite 03-27-2013 02:24 PM

1 Attachment(s)
We got you covered in this rendering, all you need to do is add our rear quarter ports...

Quote:

Originally Posted by LOWDOWN (Post 6343253)
Joseph, since you're asking:

1) Proper/efficient front brake ducting (CHECK)
2) ..."........."....... hood/heat venting (CHECK)
3) "Leno" rear 1/4 brake ducts/ducting (CHECK)


potwasher 03-27-2013 02:27 PM

i would send it to jannetty racing directly from the chevy showroom. :smoking:

zkdreads 03-27-2013 02:30 PM

create that front end for 2010-2013 camaro and u might have something there :)

Doc 03-27-2013 02:42 PM

Quote:

Originally Posted by zkdreads (Post 6343458)
create that front end for 2010-2013 camaro and u might have something there :)

That and the wider hood extractor. This combo looks much better.

MADBOWTIE 03-27-2013 02:48 PM

It would be a sin not to!!

Dave Coyle 03-27-2013 02:50 PM

As the saying goes....there is always room for more!!!!

Tribute 03-27-2013 02:54 PM

The potential out of the 427 is massive. GM kept it tame to not outdo the ZL1, but they know damn well this is a mod ready beast for the taking. Kudos GM, well done.

ron10 03-27-2013 02:57 PM

i'm thinking twin turbos.

2cnd chance 03-27-2013 03:21 PM

It needs a ZL1 hood and rear fascia...BAD!

Camper 03-27-2013 03:27 PM

id go NA with it and leave it as my daily driver. Leaving my boosted ls3 in the garage during the weak.

2SSRS@Gen5diy 03-27-2013 03:31 PM

I have a long list to add to the car, and last week i was thinking of buying a LS7, not now.

mrvenicess 03-27-2013 03:38 PM

I will be modding mine as soon as it comes in just like I did with my 2010 SS. Cam, headers, 575-600 hp?

grocerygetter 03-27-2013 03:40 PM

big cam, 2" long tubes and some kind of aftermarket something to make the Honda Prelude go away on the back end. LOL

speedmon 03-27-2013 04:10 PM

Quote:

Originally Posted by ACS Composite (Post 634157)
What do you guys think, would you touch a Z28 !


+ Cam and if the brakes can't take it then Wilwood
Just like the Z06......

Yeh!

jklipan 03-27-2013 04:23 PM

I'd sure buy that facia for my 2010 SS. How much would that run me?

Hylton 03-27-2013 04:26 PM

Joe - when you make the front brake cooling ducts to replace the fog delete trim (Z28), please mold them so they can mounted as the what is there now.

Nailn it 03-28-2013 06:16 PM

Of Course!
 
Blower, cam, bada** Stereo. Done. But then all I would really have is my ZL1, which I'm sure is much more comfortable and quieter inside. Just not feeling it. Kinda relieved its not more desireable too me, cause I would have lost my a** again on trade in.


All times are GMT -5. The time now is 12:08 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.