Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Camaro5 Store Merchandise (http://www.camaro5.com/forums/forumdisplay.php?f=91)
-   -   Travel Mug (http://www.camaro5.com/forums/showthread.php?t=287288)

mikeyg36 04-05-2013 12:07 AM

Travel Mug
 
I would love to have a C5 travel mug ;)

AdamZ 04-07-2013 12:13 AM

Quote:

Originally Posted by mikeyg36 (Post 6384433)
I would love to have a C5 travel mug ;)

+1
:popcorn:

I second this motion. Therefore, it must be put into effect.

TAG UR IT 04-07-2013 12:43 AM

Give me an idea logo wise. I'd be happy to make it happen. ;)

AdamZ 04-08-2013 04:23 AM

I mean, I'd say, just throw my car on it, put Camaro5.com above it. Should sell like hot cakes :cool:

:laugh:

TAG UR IT 04-08-2013 11:25 AM

:laugh:

Working with the vendor to find a good mug now. We'll check prices, etc from there.

TAG UR IT 04-08-2013 11:14 PM

5 Attachment(s)
Ok. There are literally thousands of styles of mugs out there. I need to know what you guys like most.

Tall mug, short mug?
Handle, no handle?
Specifics please. Here's a few shots. The last one pictured I like best so far.

But there's TONS. Give me specifics on what you'd want.

mikeyg36 04-08-2013 11:40 PM

Quote:

Originally Posted by AdamZ (Post 6397100)
I mean, I'd say, just throw my car on it, put Camaro5.com above it. Should sell like hot cakes :cool:

:laugh:

I might as well take a mug, dump orange paint on it, and crudely write "C5" on the side in sharpie :sm0:

TAG UR IT 04-09-2013 12:18 AM

Oh, come'on....you gotta have some opinions for me, man!

TheGhosty 04-09-2013 12:20 AM

I like #3

Use the Camaro5 Silhouette decal?

FunkedOut 04-09-2013 12:24 AM

Make it fit in the cup holder and stay out of the way of the stick and ill buy one.
Stainless with an SS would be tits.

Neriah 04-09-2013 12:27 AM

Quote:

Originally Posted by FunkedOut (Post 6401398)
Make it fit in the cup holder and stay out of the way of the stick and ill buy one.
Stainless with an SS would be tits.

:word:

bw26ss 04-09-2013 12:29 AM

handle would be nice

TheGhosty 04-09-2013 12:33 AM

Quote:

Originally Posted by FunkedOut (Post 6401398)
Make it fit in the cup holder and stay out of the way of the stick and ill buy one.

:happy0180: this guy is thinkin!!
If it doesn't fit in the cup holder things are going to get really awkward really quickly..

AdamZ 04-10-2013 02:53 AM

XChance...will fit in the cup holder just fine

RJT-SS 04-11-2013 08:10 PM

Handles could get in the way of cup holders depending on the cup holder. A no-handle mug is more universal. Just a thought. Also, just make sure the lid doesn't leak. I like the tall ones. As for a logo, how about the circle 5 logo that is on the fire shirt?

Firefighter 04-11-2013 08:37 PM

Quote:

Originally Posted by FunkedOut (Post 6401398)
Make it fit in the cup holder and stay out of the way of the stick and ill buy one.
Stainless with an SS would be tits.


What this guy said to a T...

For me at least it needs to fit the rear cup holder and not get too tall. I've had some decent sucess with the Monster Energy cans.

Get something about that tall and a snugish fit in the rear cup holder so it can hold as much java as possible.

This is what I have been forced to do so I can still shift like a gorilla and not spill coffee all over my interior.

Deke736 04-13-2013 04:04 PM

I like any of them without a handle that will keep my coffee hot and not spill!

Cyber_Camaro5 04-21-2013 08:03 AM

LOVE THE IDEA! :thumb:

Straight cylinder type "Tumbler" with a screw on top (to prevent the top from coming off during shifting).
- Color match the tumbler with the car colors.
- Use the Camaro5 Silhouette decal on opposite sides (laid horizontally just above the edge of the cup holder, so that is can been seen when in the car).
- And for those that have rally stripes, you could lay rally stripes vertically, dissecting the Camaro5 Silhouette decal.

Just my 2 cents...

"If you build it.... they will come":clap2:

Bad@ssCamaro 04-21-2013 10:24 PM

Quote:

Originally Posted by Cyber_Camaro5 (Post 6449846)
LOVE THE IDEA! :thumb:

Straight cylinder type "Tumbler" with a screw on top (to prevent the top from coming off during shifting).
- Color match the tumbler with the car colors.
- Use the Camaro5 Silhouette decal on opposite sides (laid horizontally just above the edge of the cup holder, so that is can been seen when in the car).
- And for those that have rally stripes, you could lay rally stripes vertically, dissecting the Camaro5 Silhouette decal.

Just my 2 cents...

"If you build it.... they will come":clap2:

I like the Redfish one and the last one for mug style.

TAG UR IT 04-21-2013 10:30 PM

Cool. I'll go through them and see if we can actually find some mugs where we can get a good quantity at a GOOD price. Will let y'all know what we come up with. ;)

Bad@ssCamaro 04-21-2013 10:32 PM

Quote:

Originally Posted by RJT-SS (Post 6413356)
Handles could get in the way of cup holders depending on the cup holder. A no-handle mug is more universal. Just a thought. Also, just make sure the lid doesn't leak. I like the tall ones. As for a logo, how about the circle 5 logo that is on the fire shirt?

This with the Camaro Silhouette above it. :headbang:

mikeyg36 05-24-2013 09:39 PM

Any news Tag?

Aubrey64 05-26-2013 07:50 PM

:pop2:

I'd be interested in this!

Mindz 06-27-2013 06:20 PM

I agree with the don't make it too tall, or it WILL mess with shifting. I don't mind a handle, but the shifter is the more important thing.

Maybe select two styles. One for manual transmissions and one for automatics.

mikeyg36 12-01-2013 08:24 PM

:yawn:


All times are GMT -5. The time now is 05:00 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.