Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Member Car Journals (http://www.camaro5.com/forums/forumdisplay.php?f=50)
-   -   Sycrafts " Hot Blown Six" Build Journal [COTW 5/6/13] (http://www.camaro5.com/forums/showthread.php?t=291319)

sycraft 04-24-2013 03:47 PM

Sycrafts " Hot Blown Six" Build Journal [COTW 5/6/13]
 
15 Attachment(s)
Well it was suggested to start a build journal of my 2012 Camaro LS. My Camaro affairs started in 1988 with and 5.7 IROC Z. Then moved to a 1992 Camaro witha 5.7 and six speed. My Camaro days were over for a few years until my kids were old enough. 1 in College and 1 in High School. We were at a local dealer one day and I looked at some Camaros and decided, what could I get for the least amount of upfront cash, so I settled on a base LS 6 spd car for 23k out the door, not too bad. My desire to mod this thing was there from the start, I can never leave anything alone anyway. So the tint and the RS/SS wheels were the first mods which changed the look. Now for the absession in no particular order:

Current Mods:

Carbon Fiber Stripes and gill stripes
Emblem Overlays
ZL1 Grille with Emblem Pros LS emblem
AAC LED side Markers
FACTORY Foglights- and yes they work like OE, I know an engineer at GM and was able to secure a BCM flash
Window Tint- 20%
GM GFX front Splitter
Leather OE steering wheel
Leather door panel armrests
Leather center console cover
Hurst Shifter with Bronze bushings and OE Hurst Leather Shifter knob
4 Pack RS guage Pack
Overhead garage door console
Dimming mirror
PDIM added
Underhood LED lighting
Hydrodipped taillight bezels
Hydrodipped engine cover and fuse cover
Powdercoated BREMBO brakes
1LE strut Tower Brace
1LE shocks and Struts
1LE upper rear shock Mounts
LSR ZL specific sways and links- outboard mounted in the rear- LSR
LSR Chassis Brace
LSR Springs
LSR Bump Steer tie rod ends
LSR Billet Toe and Lower Control Arms
Pedders rear knuckle bushings
IPF Supercharger System- Redline Motorsports
SOLO Cats
SOLO Exhaust
Nitto NT05 tires - fronts 275/40/20, rears 315/35/20
Ported Throttle Body
Calibrated by Matt at FSP in Bradenton
RAM Twin Disc Clutch
IDeal G Master Cylinder
Remote Clutch Resovoir by JDP
Factory Reproductions 1LE style wheels
ambient lighting, silver door panels and dash trim
Emblempros rear emblem
Carbon 3D Fender Vents
MightyMouse Catch can and Breather
CTSV Calipers/ ZL1 rotors
ZL1 Rockers
Blendmount with Escort Max
Diode Dynamics Halos fogs Headlights
Oracle LED Headlamp Bulbs
Diode Dynamics Switchbacks

Camaro was a feature in the January 2013 edition of GM High Tech

Currently working on another feature for Camaro Now with a custom twin disc clutch, Ideal G master Cylinder and JDP remote clutch resovoir. Released NOW

Redline Motorsports, Matt at FSP and LSR have done work on the car to get it to where it is currently. I also do much of the wrench turning.

I am sure it is not in its its final form, as nothing is ever final...
next up to include furthur drivetrain upgrades.

Vehicle has also won many shows, 1st place in the 2nd annual Florida Camaro Rally, 1st in class at Pony Wars- Valdosta, and several local shows as well.

Most recently was able to do a 2 day " Hooked on Driving " Event- what a blast...

Camaro makes 414 HP to the rear wheels on Redlines Dyno

And the best part is that I actually get to drive it like it was meant to be driven, on the racetrack, where I can find out if the modifications work, and I can attest, YES they DO !!

I am sure I am missing something, will update as needed.

Thanks to all the Camaro Clubs over the State of Florida and some in Georgia, I have made some great friends along the way, and if you see me, ask for a ride, it would my pleasure to take you for a spin...:thumb:

http://www.youtube.com/watch?v=b3gDi8XlUoQ

http://www.youtube.com/watch?v=A7Aj5Z2SDTw

lscamaro 04-24-2013 04:34 PM

Subscribed! Love seeing what you have in store next for the car!

Lil' Nasty 04-24-2013 05:36 PM

Sub'd....This thing is a Beast, no doubt...

KMPrenger 04-24-2013 10:04 PM

If it hasn't been already....deserves a COTW nomination!

V6owner 04-24-2013 10:47 PM

I love your car

BaylorCamaro 04-25-2013 08:48 AM

Dang. Didn't realize you did so much. Nice build!

Sent from my SAMSUNG Galaxy S III using telekinesis.

RED DEMON SS 04-25-2013 09:25 AM

Car looks bad ass man love it!

tj@LSRPerformance 04-25-2013 10:59 AM

How are those LSR Suspension parts treating you?? They looked like they were doing damn well on the track!

Best Regards,

TJ

Matt @ FSP 04-25-2013 03:36 PM

Rodney and I are glad to be part of this build !!!

There are some new items for the build coming up too, stay tuned :)

sycraft 04-25-2013 03:57 PM

More stuff, I love surprises.....

menendez1293 04-25-2013 04:23 PM

This car is killer. Even nicer in person :thumb:

stand-al0ne 04-26-2013 08:33 AM

I have gotten a ride in it (way before most of these newer mods) and the car is very nice. He really puts a lot of attention to the details and it shows overall.

Glad you started a build thread. Keep it coming!

sycraft 04-26-2013 08:37 AM

6 Attachment(s)
Some more, Clutch Teaser too!!

Blackone 05-06-2013 12:23 PM

Congrats to COTW : Clap2:

Sftshldr 05-06-2013 12:30 PM

Super car! Grats on COTW!! :clap2:

JimiBlaze 05-06-2013 12:43 PM

Love the looks of your car, congrats on COTW

camaro_RS 05-06-2013 01:14 PM

Bada$$ car, man!!!! Very awesome. Cool build thread and congrats on COTW!!

SoCalThug 05-06-2013 01:26 PM

Congrats on COTW! :clap:

Did you upgrade your clutch when you added the supercharger?

LAWMAN 05-06-2013 01:33 PM

Nice car,very strong for a v-6,best of both worlds,

pierre777 05-06-2013 01:47 PM

Congrats for the title bro and welcome to the club :thumb:

Matt @ FSP 05-06-2013 02:43 PM

1 Attachment(s)
Quote:

Originally Posted by SoCalThug (Post 6511324)
Congrats on COTW! :clap:

Did you upgrade your clutch when you added the supercharger?

Just so happens we have this COTW on the lift right now . Shooting for some press, you'll see the article later in the year!

However, here is a sneak peek of the new RAM Twin clutch.

SlowSS 05-06-2013 03:10 PM

Very nice and Congrats on COTW!!

laditee 05-06-2013 03:20 PM

Damn...very nice...Congrats on COTW

GunnyG 05-06-2013 06:07 PM

Congrats on COTW!

KMPrenger 05-06-2013 06:12 PM

Congrats Clint!


All times are GMT -5. The time now is 11:58 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.