Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Camaro 1LE Forum (http://www.camaro5.com/forums/forumdisplay.php?f=149)
-   -   Splitter guard washers for 1LE (http://www.camaro5.com/forums/showthread.php?t=292082)

Skylane765 04-28-2013 01:23 PM

Splitter guard washers for 1LE
 
1 Attachment(s)
We have found the splitter guard washers will fit the 1LE

We are working on a template to position them and may send shorter screws if needed.

Here is a look at them on the ZL1. More info and price. Here. http://www.camaro5.com/forums/showthread.php?t=289554

Email to info@splitterwashers.com

Skylane765 04-28-2013 01:24 PM

2 Attachment(s)
Up close pic

Skylane765 04-28-2013 01:26 PM

1 Attachment(s)
Pic looking from the front

Skylane765 04-28-2013 01:28 PM

1 Attachment(s)
Here is where the washers will help

HighMtnSS 04-28-2013 01:36 PM

Looks great:headbang:

I could really use a set of these.

tramtwo 04-28-2013 01:38 PM

Kewl idea.

tramtwo posted this on the go

beany323 04-28-2013 03:10 PM

trying to figure out a way to attach a forward camara. found all the hardware just dont need a large screen.. a small 3x3 or so should do it.

Skylane765 04-28-2013 03:39 PM

Quote:

Originally Posted by HighMtnSS (Post 6479529)
Looks great:headbang:

I could really use a set of these.

Free set to you to have if you post a pic of them on. Email address to info@splitterguard.com

Skylane765 04-28-2013 03:42 PM

Quote:

Originally Posted by tramtwo (Post 6479534)
Kewl idea.

tramtwo posted this on the go

Free set if you try out and post a pic. Send your name address to info@splitterguard.com

beany323 04-28-2013 03:51 PM

if not a free set what is cost ?

ahh.. was afraid it was zl1. till i read the post.

HighMtnSS 04-28-2013 04:56 PM

Quote:

Originally Posted by Skylane765 (Post 6479900)
Free set to you to have if you post a pic of them on. Email address to info@splitterguard.com

Okay, cool!

Email sent:thanks:

Skylane765 04-28-2013 05:08 PM

Quote:

Originally Posted by beany323 (Post 6479926)
if not a free set what is cost ?

ahh.. was afraid it was zl1. till i read the post.

Can not post price here. For more info go here. http://www.camaro5.com/forums/showthread.php?t=289554

tramtwo 04-29-2013 09:15 AM

Quote:

Originally Posted by Skylane765 (Post 6479907)
Free set if you try out and post a pic. Send your name address to info@splitterguard.com

I'm game... info being sent. :thumbsup:

HighMtnSS 05-11-2013 06:49 PM

1 Attachment(s)
I just finished installing my splitter guard washers on my 1LE. Thanks Skylane765!

Here are some pics…

HighMtnSS 05-11-2013 06:56 PM

1 Attachment(s)
Sorry the first pic is upside down, but, you get the idea…

HighMtnSS 05-11-2013 07:01 PM

2 Attachment(s)
I spaced each washer 5 1/4 inches from each other and 2 inches back from the front edge of the splitter. Of course, the splitter washers can be installed closer to the front of the splitter or in any custom configuration. For me, this will work best for the angle of my driveway and the way that I pull into and back out of the driveway.

HighMtnSS 05-11-2013 07:08 PM

1 Attachment(s)
Here are the splitter washers and screws as Skylane765 sent them to me- there are 15 of each.

Dropspeed 05-12-2013 06:41 AM

Thanks for the posts and pics. I think you would want these as far forward as possible wouldn't you?

HighMtnSS 05-12-2013 09:46 AM

Quote:

Originally Posted by Dropspeed (Post 6533903)
Thanks for the posts and pics. I think you would want these as far forward as possible wouldn't you?

Yes, you're right...but, I didn't want them so close to the front edge to where I could see them too easily when looking at the car from the front...

And, my driveway angle will allow the washers to work/protect in this position.

The beauty of these is that you can install them in any configuration.

Dropspeed 05-12-2013 10:58 AM

Gotcha, thanks.

To the OP I sent you an email using the link in the first post and it bounced back.

I would like a set.

Thanks Matt

beany323 05-12-2013 11:25 AM

Going to do these next weekend. Just gotta find a jack that fits under my car.

2010SLVRBULIT 05-12-2013 11:29 AM

what's wrong w/ regular flat washers?

h018871 05-13-2013 06:49 PM

Skylane765, the email address info@splitterwashers.com bounced back.
do you have another contact? i'd like a set

Thx

roSSco 05-28-2013 03:59 PM

Quote:

Originally Posted by 2010SLVRBULIT (Post 6534523)
what's wrong w/ regular flat washers?

IMO they would snag and be ripped out easily due to their sharp edges. ;)


All times are GMT -5. The time now is 09:29 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.