Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Camaro 1LE Forum (http://www.camaro5.com/forums/forumdisplay.php?f=149)
-   -   1LE wheel offset? (http://www.camaro5.com/forums/showthread.php?t=292266)

321 CYA 04-29-2013 11:36 AM

1LE wheel offset?
 
What is the 1LE wheel off set? and they are both 20x10 correct?
Thanks for the help. Trying to get a square setup on my SS.
Thanks

Phdpsy 04-29-2013 11:53 AM

1LE are 20x10 And 20x11 exactly as ZL1...just with 285s all around. If you want a true square set up, try something like TSW Nurburging 20x10 et35. Can run 285s (and some 295s) all around and rotate as needed for better tire life. Can't rotate the 1LE/ZL1 set ups.

Southern Comfort 04-29-2013 11:57 AM

Keep in mind the 1LE rear wheels wont fit the on the front. They contact the struts.
You could get square with 4 1LE fronts.

gajagfan 04-29-2013 12:08 PM

Not sure of the offset, but the front wheels are 10" and the rears are 11". I also know that the 11" wheel does not fit on the front. The tires are the same on all 4 wheels (285/35/20's).

JDP Tyler 04-29-2013 12:13 PM

** EDIT +23 up front and +43 in the rear.

Best regards,

Tyler
888-308-6007

321 CYA 04-29-2013 12:22 PM

Thanks everyone this is the info I have been looking for!
Thanks again!

321 CYA 04-29-2013 12:25 PM

Tyler what it the web page that has this offset comparison on?

JDP Tyler 04-29-2013 12:30 PM

I found that on this site in a search, so I am not sure.

Best regards,

Tyler
888-308-6007

321 CYA 04-29-2013 12:32 PM

Quote:

Originally Posted by Sales@JDP (Post 6483161)
I found that on this site in a search, so I am not sure.

Best regards,

Tyler
888-308-6007

Thanks I found it!

flht99b 04-29-2013 12:35 PM

Actually the ZL-1 and 1LE offsets are as follows:
20x10 fronts offset +23mm ( this will clear OEM struts with a 285/35/20 tire ) If you have some coil overs you can move the wheel/tire assembly inboard a bit with more positive offset such as +30mm
20x11 rears offset +43mm
GM picked these sizes and offsets so that the front and rear track would be the same on the ZL-1 and 1LE.
If you put a front 20x10 with +23mm offset ZL-1/1LE wheel on the rear the wheel will stick out .3" more than the 20x11 +43mm offset wheel on the rear. Pretty aggressive.
Ed M.

NinoSS 04-29-2013 12:49 PM

Quote:

Originally Posted by flht99b (Post 6483183)
Actually the ZL-1 and 1LE offsets are as follows:
20x10 fronts offset +23mm ( this will clear OEM struts with a 285/35/20 tire ) If you have some coil overs you can move the wheel/tire assembly inboard a bit with more positive offset such as +30mm
20x11 rears offset +43mm
GM picked these sizes and offsets so that the front and rear track would be the same on the ZL-1 and 1LE.
If you put a front 20x10 with +23mm offset ZL-1/1LE wheel on the rear the wheel will stick out .3" more than the 20x11 +43mm offset wheel on the rear. Pretty aggressive.
Ed M.

He is correct... See pics (my wheels) below...

Front

http://i180.photobucket.com/albums/x...415_115314.jpg

Rear

http://i180.photobucket.com/albums/x...415_115403.jpg

NinoSS 04-29-2013 12:52 PM

I have pics of them on a digital scale too...;)

JDP Tyler 04-29-2013 01:29 PM

Quote:

Originally Posted by flht99b (Post 6483183)
Actually the ZL-1 and 1LE offsets are as follows:
20x10 fronts offset +23mm ( this will clear OEM struts with a 285/35/20 tire ) If you have some coil overs you can move the wheel/tire assembly inboard a bit with more positive offset such as +30mm
20x11 rears offset +43mm
GM picked these sizes and offsets so that the front and rear track would be the same on the ZL-1 and 1LE.
If you put a front 20x10 with +23mm offset ZL-1/1LE wheel on the rear the wheel will stick out .3" more than the 20x11 +43mm offset wheel on the rear. Pretty aggressive.
Ed M.

Thank you for the correction! Good to know.

Best regards,

Tyler
888-308-6007

GT09OK 06-17-2013 08:11 PM

Will a 19x9.5 backspacing 42mm fit on a 2013 1le camaro and clear brakes and all?

Adrian97c 07-18-2014 02:37 PM

Just went to get first oil change & was surprised they told me no rotations for my 14 SS, because offset.. So it's nor just 1LE/ZL1

justjoshin 07-18-2014 02:41 PM

Quote:

Originally Posted by Adrian97c (Post 7828024)
Just went to get first oil change & was surprised they told me no rotations for my 14 SS, because offset.. So it's nor just 1LE/ZL1

Stock 2010+ Camaro SS Wheel Sizes from the factory:
Front: 20x8" w/ +35mm Offset -------- Rear: 20x9" w/ +40mm Offset

Adrian97c 07-18-2014 02:52 PM

Quote:

Originally Posted by justjoshin (Post 7828034)
Stock 2010+ Camaro SS Wheel Sizes from the factory:

Front: 20x8" w/ +35mm Offset -------- Rear: 20x9" w/ +40mm Offset


Right.. So no tire rotations except for v6


Sent from my iPhone using Tapatalk

1LEMayhem 07-18-2014 02:58 PM

Quote:

Originally Posted by Adrian97c (Post 7828056)
Right.. So no tire rotations except for v6


Sent from my iPhone using Tapatalk

Well no tire rotations except for NON-RS V6.

cincidlr 07-21-2014 09:01 AM

...another option
rotate tires, (i.e. rear tires 2front wheels/ front tires 2rear wheels) just keep them on their respective side (L/R)


All times are GMT -5. The time now is 09:52 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.