Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Camaro Price | Ordering | Tracking | Dealers Discussions (http://www.camaro5.com/forums/forumdisplay.php?f=10)
-   -   Cars that are still bayed (http://www.camaro5.com/forums/showthread.php?t=292304)

2013zl1guy 04-29-2013 01:53 PM

Cars that are still bayed
 
It seems like some cars built in the last few weeks are being stuck at bayed status. I've seen many posts scattered throughout TPW threads and the status request thread. All I've heard so far is QA is holding it up. I'm frustrated and I'm sure others are; it makes me less frustrated knowing I'm not the only one.

Please include some details about your build:

1. Trim level and options
2. TPW
3. build date
4. ship date OR still waiting for shipment
5. anything else you may have heard

For me:
1. ZL1 w/ ECF insert, crystal red tintcoat
2. TPW 4/8
3. Built 4/12
4. still waiting for shipment
5. my dealer informed me that it is on quality hold, with no estimated time of release

Blizzard 04-29-2013 04:21 PM

I have a feeling this is due to weather for the 1LE's and ZL1's because of the tires.

td195f 04-29-2013 05:36 PM

I am also waiting on shipment.
1. 1SS, 1LE, Dual Mode Exhaust, Crystal Red Tintcoat
2. TPW - 4/8
3. Built - 4/12
4. Still waiting for shipment
5. My dealer checked today and the car is back on quality hold, no further information was available.

I find the weather comment above, a little hard to believe. No offense intended to Blizzard. I work along the south shore of Lake Ontario. Oshawa is on the north shore. We've had a few nights in the past weeks where the temperature at night has dropped into the 30s, but nothing severe. Also they have shipped 1LE and ZL1 Camaros in March or early April. It was colder then than it is now.

My dealer has spoken to customer service and I have checked with Chevrolet Customer Service (William R) on this site and no one is revealing why the quality hold is in place.

Oldag 04-29-2013 05:54 PM

Looks like 4/12 was a bad day for crystal red...

GearheadSS 04-29-2013 06:46 PM

1. VR ZL1, M6. B92, RSK, Nav
2. TPW 4/15
3. build date 4/15
4. still waiting for shipment

Not my car but it's one we have ordered. We also have a CRT 2LT/RS with the same TPW that was delivered to the dealership today. Is it cold up there again? Seems like a lot of ZL1s and 1LEs are on hold again.

G Sp8s 04-29-2013 07:35 PM

BRM, M6, RS Package, 2SS, NAV
TPW- 4/22
Built - 4/26

WHAMMO 04-30-2013 12:21 AM

IOM, 1SS, 1LE, rear cam, NPP
TPW 4/22
Built 4/22

Beeing held at quality control too. Tomorrow I'll be calling my dealer for an update.

SWAG1LE 04-30-2013 09:16 AM

AGM 2SS RS 1LE NPP NAV
TPW 4/22
Built 4/26

mt000162216 04-30-2013 12:14 PM

Rally Yellow 1SS 1LE NPP
TPW 4/08
Built 4/11
Bayed Still

Overclock 04-30-2013 12:37 PM

1. AGM 2SS, 1LE, RS
2. 4/1
3. 4/3
4. Bayed
5. Only that it is on a QA hold, "no documented reason" and not ETA

2013zl1guy 04-30-2013 12:38 PM

I'm guessing it is either tire related or NPP exhaust related. As far as weather is concerned, I agree with the comment that it has been warmer than late winter was (when the last major hold was). I don't think the temperature is the cause this time.

GearheadSS 04-30-2013 03:59 PM

It's not NPP related.

z3406 05-01-2013 03:06 PM

Just a thought here but after looking around it appears that all the cars being bayed for extended periods are V8's. I haven't seen any LS or LT's with a long shipping wait. Of course I could be wrong but posting is a way to find out.

Oldag 05-01-2013 05:30 PM

Glad my SS snuck out (TPW 4/8).

Now if it will just get from the railyard to the dealer...


All times are GMT -5. The time now is 02:20 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.