Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   V8 Bolt-Ons & Tunes (http://www.camaro5.com/forums/forumdisplay.php?f=78)
-   -   Elite Engineering Catch Cans @Apex Motorsports! (http://www.camaro5.com/forums/showthread.php?t=293244)

Apex Motorsports 05-03-2013 06:07 PM

Elite Engineering Catch Cans @Apex Motorsports!
 
http://www.apex-speed.com/images/det...2bd71a1c0e.jpg


Elite Engineering L99 PCV Oil Catch Can

Elite Engineering LS3 PCV Oil Catch Can



Purpose of your Stock PCV System:

The PCV (Positive Crankcase Ventilation) system is designed to regulate and remove fumes from the engine crankcase, and to alleviate crankcase pressure which could cause oil leaks or seal damage. The PCV system routes crankcase fumes into the intake manifold where they can be burned to eliminate harmful emissions into the atmosphere. The PCV valve controls the amount of crankcase flow volume depending on the engine's load. With large throttle openings (high engine loads), the more blow-by gases are produced, and the more the PCV system flows oil vapor in to the intake manifold. The PCV valve also functions as a check valve to prevent intake manifold flow from reversing back into the crankcase when there is a backfire, or during periods of high manifold pressure (boost) during forced induction by turbocharger or supercharger.


Negative Effects of your Stock PCV System:

Many Corvette, Camaro, Firebird and GTO owners with LSX engines can testify to the amount of oil residue that can accumulate inside the intake manifold, throttle body, intake track and even the air filter during aggressive driving conditions.

There are various negative effects when excess oil vapor contaminates the intake system from the stock PCV system - such as:
  • Throttle body and/or MAF (Mass Air Flow Sensor) malfunction or failure.
  • Air filter, intercooler (if equipped) and intake ducting contamination if oil pools and run back out the intake system after engine shutdown
  • Reduced octane of the air/fuel mixture, which can cause detonation and the ECM (Engine Control Module) to retard timing, thereby reducing engine power.
  • Excessive carbon build-up on valves, piston crowns, combustion chambers and spark plugs. This also increases the chance of detonation and power loss.
  • Increased emissions & possible contamination of catalytic converters and oxygen sensors.

Bottom line: Excessive amounts of oil vapor in the intake manifold is detrimental to your engine!

Solution: Install the Elite Engineering PCV Oil Catch Can!


Ultimate Function:

The E2 Elite Engineering PCV Oil Catch Can is designed to effectively separate oil from the crankcase vapors, thereby eliminating all negative effects of excessive intake system oil contamination. Our Catch Can has been engineered to remove the oil vapor before it has a chance to contaminate your intake system.
Not all Catch Cans are created equally! Often Imitated, never duplicated. Most Catch Cans on the market are just comprised of an empty container with 2 ports. While that simple design may trap a few oil droplets, our Catch Can is designed to condense the oil vapor and trap the oil inside the container.

Our test proven design incorporates a stainless steel mesh and screening mechanism that acts like a maze to collect and condense the oil vapor. Once the oil vapors condense into liquid droplets, it falls to the bottom of the can. In addition, the top assembly is specially designed to keep any liquid from climbing out the exit hole during aggressive driving conditions. Stored oil volume is approximately 8 ounces. You will be amazed by how much oil our Catch Can will catch! Don't settle for an inferior competitor's product. Insist on Elite Engineering's Catch Can!


Premium Construction:

The Elite Engineering PCV Oil Catch Can is constructed of the finest materials inside and out. High performance car owners insist on the best products that offer unsurpassed function as well as impressive visual enhancement. Our Catch Can does both! Our exclusive design incorporates optimum function and the finest materials, construction and finish for maximum dependability.

The 2.6" diameter by 6.0" long body is machined from billet 6061-T6 aluminum alloy, and then anodized in a variety of colors for a striking look. The internal condensing screen is stainless steel encased inside an aluminum alloy housing designed for low flow restriction. The housing can be disassembled for screen inspection, cleaning or replacement if needed. The inlet and outlet hose fittings are brass, and threaded into the body and sealed with Teflon tape. Supplied hoses are fuel and oil vapor compatible (SAE 30R7 rated). The bottom catch can reservoir screws onto the top of the unit, and is sealed with a built in O-ring. Inspection and cleaning is easy by simply removing the bottom of the unit without disturbing the mounting system or hoses.

In keeping with our high quality standards, all supplied mounting hardware and screws are stainless steel. The supplied custom machined mounting bracket is black anodized 6061-T6 aluminum, and is attached to the passenger side engine head on LS1/LS6/LS7/ applications with (2) two 10 mm button head screws.

Each Catch Can kit includes everything you need to install the system. Basic mechanical skills and common hand tools are the only things required.

Kit Includes:
  • Catch Can assembly beautifully anodized in choice of available colors, complete with 3/8" barbed inlet/outlet hose fittings.
  • Custom machined mounting bracket and Aluminum Spacer for the V6 applications
  • Stainless steel mounting hardware.
  • 24 inches of 3/8" ID fuel and oil vapor compatible hose.
  • PCV adaptor hardware.
  • Black zinc plated hose clamps.
  • Brass Hose Barb fittings are standard, upgrade to Chrome Fittings for that custom look below
  • Instructions can be viewed and downloaded from here:
    Made in USA

Apex Motorsports 05-07-2013 06:54 PM

Members of the forums we sponsor have become accustomed to reading quotes like these on a regular basis.


Quote:

Originally Posted by CamaroNewb (Post 2360787)
+1 for Chase. I bought these form him like 2 weeks ago and they were at my door so fast that I couldn't figure out what they were until I opened the box.

Quote:

Originally Posted by Envious (Post 5202262)
Ordered mine on Friday had it Monday. Ordered a washer relocation tank Wednesday. Had it on Friday. Just like a Camaro, fast!

Quote:

Originally Posted by puzzzeler (Post 4968230)
I would have to agree Apex for sure really fast shipping these guys are on the ball ,give them a shot you cant go wrong.

Quote:

Originally Posted by mikester0612 (Post 5098788)
And I just wanted to give a big thanks to Apex Motorsports for the great service. Ordered this CAI on Wednesday in the afternoon around 1 and I got it on Friday !! Thanks Apex !!

Quote:

Originally Posted by JoshBobGuptaMarley (Post 4609243)
So I ordered Friday night. Order went through on Monday, intake was installed Wednesday after I got of work. Shipping was fast and free and that's why I love ordering from Apex!

Quote:

Originally Posted by Andys562 (Post 4864687)
Just got the springs in today! Planning on getting them installed a little later today or tomorrow.

But wow! Apex ships FAST. I did NOT expect the springs to be on my doorstep today and what do you know, they're right there.
Big ups to Apex for the lightning fast shipping.

Quote:

Originally Posted by Ark5thGenGirl (Post 3742223)
First of all I want to give a big thank you to Chase and Victoria from Apex Speed. I needed this part on Friday and I ordered it Wednesday; they called me personally to handle my request and got it to me really fast. They were great to work with and I really appreciate the awesome customer service.

Quote:

Originally Posted by kfm237 (Post 4468982)
Ordered the SW Retro Chambered exhaust and Black CAI on Monday.. The Exhaust arrived on Wednesday and the CAI on thursday... Thats to New Jersey.. A+++ To Apex for their quick shipping!

Quote:

Originally Posted by American Muscle (Post 1855055)
apex chase, Hurst shifter got delivered today, took only 2 days to get to CT!! Going to install it tonight, thanks for the fast service.

Quote:

Originally Posted by boricat (Post 1926169)
Unbelievable!!
Ordered on 5/28 on the doorstep 5/29!!

Thanks again,
Joe

Quote:

Originally Posted by fritcherc (Post 4575496)
I sent Chase a couple of emails, told him what I wanted and a few days later it was on my doorstep. Chase and Apex have been a pleasure to deal with and I couldn't be happier in my decision to do business with them. Great product support, easy to get ahold of and fast shipping!!!! Two thumbs up in my book! Thanks, Chris

Quote:

Originally Posted by Blackjack's Girl (Post 2128657)
Thank you so much Chase! Ordered my CAI intake Sunday, shipped Monday and got it yesterday and installed! Great service! Love the performance! 1000% satisfied!

Quote:

Originally Posted by jrrod6410 (Post 2657755)
Ordered mine Friday afternoon and got it Tuesday morning......WOW

Now I'm off to install it

Quote:

Originally Posted by SS CAMARO (Post 2552843)
Talk about fast shipping I got 1 day after you shipped it .

Quote:

Originally Posted by BigBOSS (Post 2512295)
Chase I am truly impressed! Ordered my Pfadt drop springs Sunday night and got them early Wednesday morning! A truly unexpected delivery which made my day!

Now to find a time to throw them on!

Thanks again, I am VERY impressed!!


How Do We Do It?

From the beginning, our operation was set up to function as rapidly and efficiently as possible. Most of our order processing system is automated which means that an order can be completely processed and ready for pick up within minutes of the order being placed. Unlike many of our competitors, APEX Motorsports is a stocking distributor for most of the brands we carry and not a dedicated drop shipper. This allows us to ship in stock items the same day or next if the order is received after our last pick up. In the event that an item is out of stock, APEX Motorsports has access to multiple extensive distributor networks and can draw on the inventories of dozens of regional warehouses across the country and ship the item from the warehouse closest to you.

APEX Motorsports has another key advantage over our competition. Our physical location. Like Amazon, Zappos, and many other major shippers APEX Motorsports is located in Louisville, Ky. which places us within 600 miles of more than 60% of the United States population. It also places us only a few miles from the UPS World Hub. That means that once your order leaves our loading dock it doesn't have to travel 1-2 days to be processed before being directed to your address. It is done within hours of the order being placed and is on it's way to your door, more than 60% of which aren't very far down the road.

Below is a map displaying the estimated delivery times for orders shipped from APEX Motorsports.

http://www.apex-speed.com/images/shipmap.gif

Apex Motorsports 05-12-2013 02:23 PM

https://fbcdn-sphotos-h-a.akamaihd.n...76291861_n.jpg

NOT URSS 05-22-2013 07:46 AM

Which can needed for L99-LS3 Conversion? lol

Apex Motorsports 05-22-2013 03:13 PM

LOL, go with the LS3.

NOT URSS 05-22-2013 03:24 PM

sounds good lol

ToolFan66 06-23-2013 06:01 PM

Are you on the fence?
 
1 Attachment(s)
If so get off of it, this can works great, my only bitch is I put 15k on my car before I installed one..

Dexter9522 07-06-2013 06:14 PM

Just placed my order. Thanks for answering all my questions. :thumb:

Dexter9522 07-20-2013 06:58 AM

Got mine installed. Fast shipping and great customer service. Will be a repeat customer

Apex Motorsports 07-25-2013 03:40 PM

Thanks for your order and the feedback.

Apex Motorsports 09-18-2013 07:20 PM

It is HUMP day! Be sure to place your order before the weekend sneaks up.

http://apex-speed.com/images/emoticons/morgan_ships.jpg

StephenRay13 09-19-2013 04:09 PM

Does this catch can replace that strange thing they put over the oil inlet on the 1LE? If so, I'm all in for one of these with the intake scoop and washer bottle I'm about to order.


All times are GMT -5. The time now is 12:16 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.