Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Forced Induction - V8 (http://www.camaro5.com/forums/forumdisplay.php?f=74)
-   -   D1SC power number guess (http://www.camaro5.com/forums/showthread.php?t=294932)

mcdoogle6969 05-11-2013 08:47 PM

D1SC power number guess
 
Hi guys, I'm currently waiting on a D1 for my build I recently had a 2.8L Kenne Bell but I sold it.

With a built 416 stroker (factory block, eagle kit + JRE blower cam, L99 to LS3 conversion kit, ARP hardware, ect) and all the supporting mods needed...Anywho, through a A6 what power numbers should I see running boost levels around 12psi? Could I push the motor past that?

I'm just anxious to find out but the wait is killing me, parts need to show up NAO!!

Supercharged SS 05-11-2013 08:56 PM

Quote:

Originally Posted by mcdoogle6969 (Post 6532908)
Hi guys, I'm currently waiting on a D1 for my build I recently had a 2.8L Kenne Bell but I sold it.

With a built 416 stroker (factory block, eagle kit + JRE blower cam, L99 to LS3 conversion kit, ARP hardware, ect) and all the supporting mods needed...Anywho, through a A6 what power numbers should I see running boost levels around 12psi? Could I push the motor past that?

I'm just anxious to find out but the wait is killing me, parts need to show up NAO!!

Is your trans still stock?

What fuel system? What's in the eagle kit?

I would say at 12 psi you'll be close to 650 rwhp. A6 sucks some rwhp up.

mcdoogle6969 05-11-2013 08:59 PM

Quote:

Originally Posted by Supercharged SS (Post 6532940)
Is your trans still stock?

What fuel system? What's in the eagle kit?

I would say at 12 psi you'll be close to 650 rwhp. A6 sucks some rwhp up.

No trans will be built, looking at the LPE fuel system.

As for the kit I believe its eagle crank, H-beam rods, and I think Pistons are from them as well. I can't remember all the details since the shop I'm going through is taking care of everything. Also getting a fast intake manifold, heads are ported, 1000cc injectors, meth injection, and I'm going with the 12 rib pulley setup with their upgraded intercooler and such.

Supercharged SS 05-11-2013 09:03 PM

Quote:

Originally Posted by mcdoogle6969 (Post 6532950)
No trans will be built, looking at the LPE fuel system.

As for the kit I believe its eagle crank, H-beam rods, and I think Pistons are from them as well. I can't remember all the details since the shop I'm going through is taking care of everything. Also getting a fast intake manifold, heads are ported, 1000cc injectors, meth injection, and I'm going with the 12 rib pulley setup with their upgraded intercooler and such.

I'd crank the boost up to 15/16 psi if that blower is decently efficient at the level. Seems like the super charger will be the limiting factor. All the other parts are good to go.

Just keep in mind that the LPE duals are good to about 800 rwhp or so.

mcdoogle6969 05-11-2013 09:06 PM

What other fuel system would you recommend? I would really like to break into the 700rwhp range but I think 800rwhp+ would be too much for me right now lol

Supercharged SS 05-11-2013 09:09 PM

Quote:

Originally Posted by mcdoogle6969 (Post 6532977)
What other fuel system would you recommend? I would really like to break into the 700rwhp range but I think 800rwhp+ would be too much for me right now lol

If your staying between the 7-800 rwhp get the LPE duals. I've had it for three years now and it's been flawless. No problems what so ever.

Above 800 seems like the Squash is the ticket. I haven't explored those options because my car would be to fast with 800 rwhp!!:laugh: It only makes 732 now.:frown:

ToddB 05-11-2013 09:13 PM

I think if you go over 700hp I can drive it till your ready - I am only 30 miles away. :lol:

mcdoogle6969 05-11-2013 09:18 PM

Quote:

Originally Posted by Supercharged SS (Post 6532987)
If your staying between the 7-800 rwhp get the LPE duals. I've had it for three years now and it's been flawless. No problems what so ever.

Above 800 seems like the Squash is the ticket. I haven't explored those options because my car would be to fast with 800 rwhp!!:laugh: It only makes 732 now.:frown:

Yeah I'll stick with the LPE, should suit me good enough! :)

mcdoogle6969 05-11-2013 09:19 PM

Quote:

Originally Posted by ToddB (Post 6533002)
I think if you go over 700hp I can drive it till your ready - I am only 30 miles away. :lol:

I'll promise you a ride, but no driving for you :bellyroll:

Detoxx03 05-11-2013 11:57 PM

12 psi should see close to 700 but the auto is gonna eat a good bit of power plus on a 416 you should have a F1 series Procharger to get the best out of your setup.

BullF-16 05-12-2013 10:16 AM

Quote:

Originally Posted by Detoxx03 (Post 6533544)
12 psi should see close to 700 but the auto is gonna eat a good but of power plus on a 416 you should have a F1 series Procharger to get the best out of your setup.

:word:

Alvin@PCMofNC 05-12-2013 10:35 AM

Have you bought the blower yet? If it was me I would skip to a F-1R. A D1 will be limited to about 750-maybe 800ish on that setup and while that might be too much now you'll grow in to it. A upgrade now is a lot cheaper than a upgrade later.

MANNYS2SS/RS 05-12-2013 02:29 PM

Quote:

Originally Posted by Detoxx03 (Post 6533544)
12 psi should see close to 700 but the auto is gonna eat a good but of power plus on a 416 you should have a F1 series Procharger to get the best out of your setup.

Quote:

Originally Posted by Alvin@PCMofNC (Post 6534381)
Have you bought the blower yet? If it was me I would skip to a F-1R. A D1 will be limited to about 750-maybe 800ish on that setup and while that might be too much now you'll grow in to it. A upgrade now is a lot cheaper than a upgrade later.

Agree 100%

Padre 05-12-2013 05:24 PM

I'm doing OK on the stock bottom end with a D1SC. :)

If I were doing it now, I'd be looking at the new i1 from ProCharger.

Padre

Detoxx03 05-12-2013 05:48 PM

Quote:

Originally Posted by Padre (Post 6535370)
I'm doing OK on the stock bottom end with a D1SC. :)

If I were doing it now, I'd be looking at the new i1 from ProCharger.

Padre

We're not discussin a stock bottom end. This guy had a 416 which needs to be fed by something bigger than a D1SC. I'm on a stock bottom end LS3 also with a D1SC and 4.5 pulley making 742. I know it won't last forever so it and when it lets to i'll do what needs to be done.

Padre 05-12-2013 06:09 PM

Quote:

Originally Posted by Detoxx03 (Post 6535436)
We're not discussin a stock bottom end. This guy had a 416 which needs to be fed by something bigger than a D1SC. I'm on a stock bottom end LS3 also with a D1SC and 4.5 pulley making 742. I know it won't last forever so it and when it lets to i'll do what needs to be done.

I gathered that. ;) He's already bought the D1. If he wants to max it out for the 416, he might consider doing as I've done: wastegate and boost controller, which offers similar performance to the new i1.

Padre

MANNYS2SS/RS 05-12-2013 08:48 PM

Quote:

Originally Posted by Detoxx03 (Post 6535436)
We're not discussin a stock bottom end. This guy had a 416 which needs to be fed by something bigger than a D1SC. I'm on a stock bottom end LS3 also with a D1SC and 4.5 pulley making 742. I know it won't last forever so it and when it lets to i'll do what needs to be done.

Thats 742 hp to the fly wheel right.

Detoxx03 05-12-2013 09:41 PM

Quote:

Originally Posted by MANNYS2SS/RS (Post 6536066)
Thats 742 hp to the fly wheel right.

Nope don't deal in fly wheel numbers

MANNYS2SS/RS 05-13-2013 07:47 AM

Quote:

Originally Posted by Detoxx03 (Post 6536276)
Nope don't deal in fly wheel numbers

WOW AWESOME NUMBERS! :headbang: We have almost the same setup, except for the cam. I am also using a smaller blower (4.13) pulley, and I am nowhere near your power level. What else have you done? (Heads,Intake)

thebeast916 05-13-2013 09:05 AM

I thinks those numbers are for his vette!

thebeast916 05-13-2013 09:06 AM

I thinks those numbers are for his vette!

BullF-16 05-13-2013 09:38 AM

Quote:

Originally Posted by MANNYS2SS/RS (Post 6537356)
WOW AWESOME NUMBERS! :headbang: We have almost the same setup, except for the cam. I am also using a smaller blower (4.13) pulley, and I am nowhere near your power level. What else have you done? (Heads,Intake)

Slap on that 4.00 pulley and you will be alot closer to 700whp:thumbsup:

MANNYS2SS/RS 05-13-2013 09:51 AM

Quote:

Originally Posted by BullF-16 (Post 6537647)
Slap on that 4.00 pulley and you will be alot closer to 700whp:thumbsup:

LOL it's coming :headbang:

Detoxx03 05-13-2013 11:32 AM

Quote:

Originally Posted by MANNYS2SS/RS (Post 6537356)
WOW AWESOME NUMBERS! :headbang: We have almost the same setup, except for the cam. I am also using a smaller blower (4.13) pulley, and I am nowhere near your power level. What else have you done? (Heads,Intake)

Nope just custom blower cam, headers, stock dual mode exhaust, alky control meth, and the blower with the 4.5 barely hitting 10psi.

Quote:

Originally Posted by thebeast916 (Post 6537545)
I thinks those numbers are for his vette!

Correct

MANNYS2SS/RS 05-13-2013 01:11 PM

[QUOTE=Detoxx03;6538027]Nope just custom blower cam, headers, stock dual mode exhaust, alky control meth, and the blower with the 4.5 barely hitting 10psi.

Detoxx03 you have a sweet ride, it's cool to see that theirs quit a difference between the two car's. Plus it looks like your Futral custom cam doesn't bleed off boost like mine. I have to use a 4.13 pulley to get the same boost as you. I am thinking of putting a 4" pulley with a blow off valve like Padre did on his D1SC ProCharger.


All times are GMT -5. The time now is 12:23 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.