Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Camaro ZL1 Forum - ZL1 Specific Topics (http://www.camaro5.com/forums/forumdisplay.php?f=85)
-   -   I COULDN'T RESIST! MORE ZL1 MODS (http://www.camaro5.com/forums/showthread.php?t=295444)

dmax86 05-14-2013 01:06 PM

I COULDN'T RESIST! MORE ZL1 MODS
 
6 Attachment(s)
Attachment 510202

Attachment 510209

Attachment 510203

Attachment 510204

Attachment 510205

Attachment 510210

family man 05-14-2013 01:08 PM

Congrats!

thespymaster 05-14-2013 01:09 PM

nice and it never ends, trust me :headbang:

dmax86 05-14-2013 01:15 PM

LOL I KNOW! BUT ITS NOT WHAT I TELL MY WIFE!!:bellyroll:

Mike TexaSS 05-14-2013 01:17 PM

Whos tuning it?

dmax86 05-14-2013 01:22 PM

Quote:

Originally Posted by Mike TexaSS (Post 6542751)
Whos tuning it?


NOT ME! LOL

YALL HAVE MY BLOWER THOUGH!

charlietuna 05-14-2013 02:21 PM

It's going to be a beast. Post the dyno run !

dmax86 05-14-2013 02:39 PM

Quote:

Originally Posted by charlietuna (Post 6543039)
It's going to be a beast. Post the dyno run !

WILL DO!


GIVE ME A WEEK OR SO... WAITING ON A COUPLE OF PARTS. THROWING THE CAM IN THIS WEEK ALONG WITH THE ARP HEAD STUDS WITH THE CNC HEADS. WAITING FOR MY BLOWER TO COME BACK AND THATS REALLY IT...

I ALMOST CONVINCED MYSELF TO DO PISTONS AND RODS BUT I HELD BACK. THESE LS MOTORS CAN TAKE A BEATING... I FIGURE ILL GET MY MONEY OUTTA THIS ONE FIRST! LOL

BeardWS6 05-14-2013 02:42 PM

Mike and crew put mine together.. I wish I would have done heads also and got more power out of her, O well..Your right, these motors are tough..The cam mike picked works really well on the street and made good power and trq at the wheels..numbers in my sig with auto..Good luck bro

dmax86 05-14-2013 02:45 PM

Quote:

Originally Posted by BeardWS6 (Post 6543122)
Mike and crew put mine together.. I wish I would have done heads also and got more power out of her, O well..Your right, these motors are tough..The cam mike picked works really well on the street and made good power and trq at the wheels..numbers in my sig with auto..Good luck bro


I"M FAMILIAR WITH YOUR CAR! ITS AWESOME.

YOUR RUNNING METH CORRECT?

DO YOU HAVE THE GT9 OR THE BTR STAGE 2? I FORGOT?

supercharged zl1 05-14-2013 02:51 PM

:drool:

BeardWS6 05-14-2013 03:15 PM

Quote:

Originally Posted by dmax86 (Post 6543137)
I"M FAMILIAR WITH YOUR CAR! ITS AWESOME.

YOUR RUNNING METH CORRECT?

DO YOU HAVE THE GT9 OR THE BTR STAGE 2? I FORGOT?

Roto Fab Cold Air Kit
2. ZL1 Custom Heat Exchanger with dual fans
3. Metco Motorsports 9.1" lower pulley ( includes innovators west damper)
4. Metco Motorsports 2.5" blower pulley
5. Cam specs 227/242/520/590/122+6.
6. .675 lift double valve spring kit with Ti Retainers
7. Comp cam pushrods
8. 160 degree thermostat
9. solid isolater
10. Kooks 1 7/8" headers with Catted Connection pipe
11. Metco 50 MM Idler pulley
12. Blower belt
13. Ported mouth, ported blower, snout, throttle body
14. MSD wires and NGK TR7IX spark plugs
15. Alky Control Meth injection kit
16. ID 850 fuel Injectors

And runs like a Beast!

dmax86 05-14-2013 03:25 PM

Quote:

Originally Posted by BeardWS6 (Post 6543288)
Roto Fab Cold Air Kit
2. ZL1 Custom Heat Exchanger with dual fans
3. Metco Motorsports 9.1" lower pulley ( includes innovators west damper)
4. Metco Motorsports 2.5" blower pulley
5. Cam specs 227/242/520/590/122+6.
6. .675 lift double valve spring kit with Ti Retainers
7. Comp cam pushrods
8. 160 degree thermostat
9. solid isolater
10. Kooks 1 7/8" headers with Catted Connection pipe
11. Metco 50 MM Idler pulley
12. Blower belt
13. Ported mouth, ported blower, snout, throttle body
14. MSD wires and NGK TR7IX spark plugs
15. Alky Control Meth injection kit
16. ID 850 fuel Injectors

And runs like a Beast!

THAT LIST IS GOING TO BE VERY SIMILAR TO MY BUILD. I'M STILL ON THE FENCE ON THE METH... I DO LIKE IT, I HAD IT ON MY LAST CAR. THE ONLY OTHER THING I DON'T HAVE...YET IS THE DUAL PASS HX W/ FANS? OH AND MY KOOKS ARE CAT-LESS

WHATS YOUR TAKE ON IT AS FAR AS NECESSITY? (OR OTHERS)

Asanti 05-14-2013 04:33 PM

Quote:

Originally Posted by BeardWS6 (Post 6543288)
Roto Fab Cold Air Kit
2. ZL1 Custom Heat Exchanger with dual fans
3. Metco Motorsports 9.1" lower pulley ( includes innovators west damper)
4. Metco Motorsports 2.5" blower pulley
5. Cam specs 227/242/520/590/122+6.
6. .675 lift double valve spring kit with Ti Retainers
7. Comp cam pushrods
8. 160 degree thermostat
9. solid isolater
10. Kooks 1 7/8" headers with Catted Connection pipe
11. Metco 50 MM Idler pulley
12. Blower belt
13. Ported mouth, ported blower, snout, throttle body
14. MSD wires and NGK TR7IX spark plugs
15. Alky Control Meth injection kit
16. ID 850 fuel Injectors

And runs like a Beast!

I'm just curious and obviously you don't have to answer but what did all of this cost?

dmax86 05-14-2013 05:42 PM

Quote:

Originally Posted by Asanti (Post 6543591)
I'm just curious and obviously you don't have to answer but what did all of this cost?

A LOT! LOL

2012-1822 05-14-2013 05:46 PM

Quote:

Originally Posted by thespymaster (Post 6542697)
nice and it never ends, trust me :headbang:

I don't want to hear that, I want to do everything I want, get it tuned, and enjoy


Curious question, maybe I'll do a thread, although no one really responds well to my threads, but..

How many people do most or all of the work on their ZL1 themselves and then carry to a tuner with a dyno?

SPOOKYGUNNER 05-14-2013 05:53 PM

Quote:

Originally Posted by dmax86 (Post 6542739)
LOL I KNOW! BUT ITS NOT WHAT I TELL MY WIFE!!:bellyroll:


AT LEAST YOU CAN TELL YOUR LADY YOU ARE NOT ADDICTED TO STRIPPERS BOOZE DRUGS Or HOOKERS!!

Jer4251 05-14-2013 05:57 PM

Quote:

Originally Posted by SPOOKYGUNNER (Post 6543868)
AT LEAST YOU CAN TELL YOUR LADY YOU ARE NOT ADDICTED TO STRIPPERS BOOZE DRUGS Or HOOKERS!!

whats with all the yelling in this thread??

:typing:

2012-1822 05-14-2013 06:00 PM

Quote:

Originally Posted by SPOOKYGUNNER (Post 6543868)
AT LEAST YOU CAN TELL YOUR LADY YOU ARE NOT ADDICTED TO STRIPPERS BOOZE DRUGS Or HOOKERS!!

Unless those headers are Hookers, then it could get confusing and lead to divorce anyway

dmax86 05-14-2013 06:17 PM

Quote:

Originally Posted by SPOOKYGUNNER (Post 6543868)
AT LEAST YOU CAN TELL YOUR LADY YOU ARE NOT ADDICTED TO STRIPPERS BOOZE DRUGS Or HOOKERS!!

LOL! TRUE

dmax86 05-14-2013 06:18 PM

Quote:

Originally Posted by Jer4251 (Post 6543889)
whats with all the yelling in this thread??

:typing:

I DON'T KNOW WHAT WE'RE YELLING ABOUT! ....LOUD NOISES!

Haha

dmax86 05-14-2013 06:19 PM

Quote:

Originally Posted by 2012-1822 (Post 6543839)
I don't want to hear that, I want to do everything I want, get it tuned, and enjoy


Curious question, maybe I'll do a thread, although no one really responds well to my threads, but..

How many people do most or all of the work on their ZL1 themselves and then carry to a tuner with a dyno?



GUILTY! :)

JFWJR179 05-14-2013 06:55 PM

Quote:

Originally Posted by dmax86 (Post 6542739)
LOL I KNOW! BUT ITS NOT WHAT I TELL MY WIFE!!:bellyroll:

Post a video of the dyno results and the idle with Comp cam.
I want to install a Comp cam for lumpier idle after warranty expires.

dmax86 05-14-2013 08:35 PM

Quote:

Originally Posted by JFWJR179 (Post 6544070)
Post a video of the dyno results and the idle with Comp cam.
I want to install a Comp cam for lumpier idle after warranty expires.


NO PROB HOMIE

SamHouseIII 05-14-2013 08:59 PM

SWEET!!!!


All times are GMT -5. The time now is 02:33 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.