Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Camaro V6 LLT Engine, Exhaust, and Bolt-Ons (http://www.camaro5.com/forums/forumdisplay.php?f=38)
-   -   Black Ice port matching tool question (http://www.camaro5.com/forums/showthread.php?t=296065)

motley1987 05-17-2013 12:04 PM

Black Ice port matching tool question
 
I saw on some instructions on the site that you can use a dremel or similar tool to port match the heads to the black ice-olator. Does anyone know the correct grit of sandpaper to use to do this? Thanks for the info!

Ben

rtcat600man 05-17-2013 07:14 PM

I used my dremel tool, using the little round sand paper discs that came with the kit. Only removing a small amount of aluminum. Not to hard to do.

motley1987 05-17-2013 07:23 PM

Cool, I wasn't sure how hard that stuff was to sand down.

Ventmaster 05-18-2013 06:54 PM

80-100 grit works nicely. :nod:


All times are GMT -5. The time now is 12:02 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.