Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Camaro V6 LLT Engine, Exhaust, and Bolt-Ons (http://www.camaro5.com/forums/forumdisplay.php?f=38)
-   -   Catch can Check Valve.. HELP (http://www.camaro5.com/forums/showthread.php?t=296329)

Wuiquen 05-18-2013 07:15 PM

Catch can Check Valve.. HELP
 
1 Attachment(s)
quick question, I while back I got a plain fitting to replaced the check valve on the catch can because it was making noises which we decided probably was bad. After a long moving cross country and more BS.. finally I get to look into this.. My questions is how do I remove the check valve from the catch can?? I can see that the outlet (outside one) can be unscrewed; however, the center wont let me do that. I cant figure out how to get the center fitting out either. I pull it out and no luck.. IDK what to do.. by the way I am guessing the center is the check valve.

Any advice is welcome.. I attached a pic of the catch can so its easier to see what Im talking about.

Attachment 511624

mickmosh 05-18-2013 08:02 PM

Pull it out it's in there too. You won't break it just pull straight up and out it'll come. Mine was rattling so I pulled it apart to get check vavle out of it. So nice without the rattle make noise....:-)

Wuiquen 05-18-2013 08:44 PM

u mean pull out the middle fitting??

mickmosh 05-18-2013 09:03 PM

Yes the center one will pull out and the out side one will twisted out.

Wuiquen 06-12-2013 09:41 PM

thank you.. got this done a wk agoo..

c_cook94 06-12-2013 11:17 PM

Mine has been rattling for a while now. Just remove it? Is everything still going to work properly?

Wuiquen 06-13-2013 04:54 PM

No u need to get another fitting to the replace the check valve. Ask Tracy for one.


All times are GMT -5. The time now is 04:35 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.