Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Cosmetics and Lighting Modification Discussions (http://www.camaro5.com/forums/forumdisplay.php?f=37)
-   -   Plasti Dip Mod (http://www.camaro5.com/forums/showthread.php?t=296428)

miltp 05-19-2013 01:52 PM

Plasti Dip Mod
 
2 Attachment(s)
My first plasti dip project, what do ya think.The nice part is if you dont like it ,peel it off!Attachment 511823

Attachment 511824

13FastBlkSS 05-19-2013 02:03 PM

Looks good.... :thumbsup:

Might I suggest the tail light bezels next?

GbrilliantQ 05-19-2013 02:55 PM

Nicely done.

Sent from my Transformer

IN4NO 05-19-2013 04:24 PM

Did you remove and paint or do it on the car? Curious as to keeping the overspray out of the "cavity" that the pipes sit in...

miltp 05-19-2013 06:48 PM

Quote:

Originally Posted by IN4NO (Post 6563199)
Did you remove and paint or do it on the car? Curious as to keeping the overspray out of the "cavity" that the pipes sit in...

Taped off with paper and sprayed right in place.I stuffed a rag in the tailpipe prior.

miltp 05-19-2013 06:50 PM

Quote:

Originally Posted by 13FastBlkSS (Post 6562819)
Looks good.... :thumbsup:

Might I suggest the tail light bezels next?

I thought the same thing after i was done with diffuser.

CamaroDIYking 05-20-2013 12:32 AM

Thought about doing the same thing you did. How's it holding up with the heat? I don't know plastidips heat tolerance. Anything melt yet?

Aubrey64 05-20-2013 12:34 AM

Looks good!

Linker239 05-20-2013 01:43 AM

Looks good

Camaromax 05-20-2013 02:39 AM

:w00t::coolpics:

I love plastidip! I did it to my LS the bezels, wheels and the bowties in front and rear! I didnt want to paint them since I'll trade the car in for an SS once I'm old ready to handle a V8!

miltp 05-20-2013 08:20 AM

Quote:

Originally Posted by CamaroDIYking (Post 6564828)
Thought about doing the same thing you did. How's it holding up with the heat? I don't know plastidips heat tolerance. Anything melt yet?

So far so good. No sign of melting or anything else.Holding up very well :happy0180:

angie7 05-20-2013 08:32 AM

That looks very cool!!!!

MackMan 05-20-2013 12:00 PM

Quote:

Originally Posted by miltp (Post 6565399)
So far so good. No sign of melting or anything else.Holding up very well :happy0180:

I have plastidipped my exhaust pipes and no melting there. :D

Looks great OP! Nice touch. Definitely do those tail light bezels next . ;)

family man 05-20-2013 12:01 PM

I like it, nice job. I agree, do the bezels next.

BA RS 05-20-2013 09:28 PM

3 Attachment(s)
looks good. I did some more plastic dip over the weekend and I used the plastic dip metalic spray to go over the black and I think I like it better than just the black.

Forte 05-22-2013 02:30 PM

Looks great both of you! Good work.


All times are GMT -5. The time now is 10:19 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.