Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Member Car Journals (http://www.camaro5.com/forums/forumdisplay.php?f=50)
-   -   Powders build thread (pic heavy) [COTW 7/8/13] (http://www.camaro5.com/forums/showthread.php?t=299567)

angie7 06-03-2013 02:04 PM

Powders build thread (pic heavy) [COTW 7/8/13]
 
8 Attachment(s)
Attachment 612900Attention:All right reserved. Any and all photos/videos found within this thread may not be copied, edited, reproduced, linked, or displayed in any form or by any means; electronic, mechanical, optical, or otherwise, without prior written permission from myself. If you wish to use any of the photos/videos found within this thread please send me a PM.


Ive had several ask me to create a build thread so here goes. I'll try to make a list of everything the car has to offer along with pics. Happy reading and looking :headbang:

SOLD: AUGUST 2014

2011 Camaro 1SS/RS Automatic. Bought completely stock in Oct 2011 with 17 miles on her. Shes not a daily driver but not a garage queen either.

Achievements:

Featured in the Feb 2014 Camaro Performaners magazine: Readers Rides

Featured in the 2014 Camaro5 Calendar: July

Torquenews.com Feb 2014

On multiple internet websites as a display vehicle

Taken mulittle awards such as Best in Show, Best in Class and many more top awards.

Mods to date (in no particular order)

Exterior:
Halo Reverse Tilt Hood
3D Carbon Functional Vents
T4 Front Splitter
Razzi Side Skirts
Heritage Grill
Oracle "Demon Eye" Halos
Oracle Halo Fog Lights
Custom Painted Headlight & Fog Housings
Technostalgia Rapid Fire Sequential Tail Lights
3M Carbon Fiber Custom "Tiger" Hood Stripes, Spoiler, Taillight Bezels, Side Mirrors, Gas Door, Gill Inserts, & Wiper Arms
Custom Rear blackout panel w/ Painted "Camaro" emblem"
Carbon fiber roof
Solid black dipped 20" rims
Matte White Wiper Cowl & Trunk Extenders
Painted Brembo Calipers
20% window tint with 8" windshield brow
Smoked Tails & Side markers
Pink "Camaro" vinyl on door handles
Pink bowtie rim center
DRL harness
LED Tag Light

Interior:
Custom Painted White & Pink center console, overhead console, Steering wheel, Speedometer bezel, '69 fender emblem on dash, dash/door inserts, dash end covers & kick plates
3M Carbon Fiber Vents, Center Console, E-Brake & Radio Surround
Billet Aluminium & Carbon Fiber Foot Pedals
"Camaro" Powder coated GearShifter
Billet Trunk Latch Panel, Radio & Arm Knob Surrounds
LED Dome Light
Pink trimmed floor mats
"Camaro" sun visor overlays

Engine Bay:
Custom painted Plenum cover, Fusebox w/ Ghost Flame, CAI intake tube & CAI box
Custom plenum and fuel rail covers
Fuel rail flip
Heater Hose Relocate
Billet Bowtie Under Hood Emblem in 3M Carbon Fiber with "SS" White Carbon Fiber Inlay
Gunmetal & Carbon Fiber Cap Covers
Black Bowtie Billet Aluminum Heatsink cover

Performance:
6.2L V8 376 ci
TSP 1 7/8 304 Stainless Steel Long Tube Headers
Custom Performance Tune
Flowmaster AT Catback Exhaust w/ X pipe
VMAX Ported Throttle Body
RotoFab Cold Air Intake
160* Thermostat
NGK-TR6 Spark Plugs
BMR Strut Tower Brace

Special LED lighting:
LED Interior Footwell
LED Engine Bay
LED Custom "Powder" trunk panel
LED RGB Scanner Bar
LED 7 color underglow

Cleaning products sponsored by www.DrAutoLogic.com

Most of the mods I have done myself such as the custom interior and engine bay paint, 3M carbon fiber, lighting, etc.


******I will post pics of new mods as I do them but I will continue to edit this page so everything is accurate here to date.

angie7 06-03-2013 02:16 PM

5 Attachment(s)
Heres a few starting with the first day (night) I brought her home. I traded in a 2011 Camaro LT for her so had some parts transfer over and did it the same night I brought her home. You can tell it didnt take long for me to start modding. Calipers and exhaust were done within a few days..

angie7 06-03-2013 02:20 PM

5 Attachment(s)
Some changes in process

angie7 06-03-2013 02:25 PM

8 Attachment(s)
and more

angie7 06-03-2013 02:29 PM

3 Attachment(s)
wonder where I get it from?? Here ya go. My dads ride. 1932 Ford 3 window coupe. Ford tough with Chevy stuff. 350 small block. Completely rebuilt by my father. Took 4 years to complete. The 57 is a friends car too.

angie7 06-03-2013 02:32 PM

8 Attachment(s)
How Powder looks today

angie7 06-03-2013 02:46 PM

4 Attachment(s)
Heres some of the lighting (I know not all are a fan of them and thats ok)

Some vids of the lights in action too. the underglows are going with music in this one
http://www.youtube.com/watch?v=2QZlCyvcWmg

Oracle Dynamic Scanner bar
http://www.youtube.com/watch?v=edd67DejNIY

Behic2320 06-03-2013 03:02 PM

Well its about time you started a build thread. :) Looks great

angie7 06-03-2013 03:13 PM

Quote:

Originally Posted by Behic2320 (Post 6623350)
Well its about time you started a build thread. :) Looks great

I know right?? haha

Thanks :thumbup:

Behic2320 06-03-2013 03:17 PM

By the way I love how you had your intake manifold painted, How much did that run you if you dont mind me asking

chevy27 06-03-2013 03:19 PM

nice ride just need to be lowered an inch or 2 ..

angie7 06-03-2013 03:20 PM

Quote:

Originally Posted by Behic2320 (Post 6623396)
By the way I love how you had your intake manifold painted, How much did that run you if you dont mind me asking

I painted it all myself so maybe 15 bucks in paint plus labor.

SlyJester7 06-03-2013 03:24 PM

Quote:

Originally Posted by Behic2320 (Post 6623350)
Well its about time you started a build thread. :) Looks great

haha I was thinking the same!

:coolpics: subscribed

angie7 06-03-2013 03:40 PM

Quote:

Originally Posted by SlyJester7 (Post 6623428)
haha I was thinking the same!

:coolpics: subscribed

Lol thanks :D


All times are GMT -5. The time now is 05:23 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.