Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums -

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - (
-   Sponsors Camaro Builds / Project Cars (
-   -   MTI Racing ZL1 Build. (

Johnny@MTI 06-12-2013 03:16 PM

MTI Racing ZL1 Build.

got a ZL1 in the shop this morning. it's getting the works, and expect to see the detailed build soon...

Blackone 06-13-2013 02:46 AM

Thread is subscribed :w00t:

pierre777 06-13-2013 03:20 AM


Johnny@MTI 06-13-2013 12:05 PM
Pulled the supercharger, headers, rockers off. now we wait for UPS to bring in a pile.

SlyJester7 06-13-2013 12:15 PM

:w00t: :bow: cant wait to see what all will be done

Johnny@MTI 06-20-2013 10:28 AM

took the valve covers off, pulled the rockers and the push rods.

check out these little guys.. instead of pulling them we'll just swap out the head that has a little nicer set.

here is Kerby working away. I had to jingle my keys above the camera to get him to look at the camera. he gets really involved in the work that he is doing.

mmmm 6.2L :drool: note the stock timing tensioner. we have had a few cases of these failing and chewing up motors.

So we replace all of them. This nice little unit is cheap and much safer. We call it the Bow-tie. -wile we where at it we upgraded the gears to a C6R Set and upgraded the oil pump too!

Mindz 06-20-2013 06:15 PM

This looks interesting! :popcorn:

The Baron 06-20-2013 06:49 PM

looking for some e.t, skip the

Johnny@MTI 06-21-2013 12:12 PM

going out of order here, but our MTI LSA cam went in.

we'll need a big bag to put everything that's not going back into the car.

Installed the MTI stage 3 heads. port-polished-springs-retainers...the works.

Oversized pulleys for more boost.

Johnny@MTI 07-03-2013 01:02 PM

Richy_Rich 12-31-2013 03:20 PM


All times are GMT -5. The time now is 05:12 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2015, vBulletin Solutions, Inc.