Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Suspension / Brakes / Chassis (http://www.camaro5.com/forums/forumdisplay.php?f=93)
-   -   Pfadt suspension upgrades (http://www.camaro5.com/forums/showthread.php?t=301543)

BalogUK 06-12-2013 05:00 PM

Pfadt suspension upgrades
 
New parts on their way! Stay tuned for the install-
ZL spec sway bars, drop springs and the 2010 rear upgrades....

Thanks Apex!
:happyanim:

Apex Paul 06-12-2013 05:38 PM

it's gonna change your life. (well, at least how you corner)

http://apex-speed.com/images/emotico...wshortsoff.jpg

BalogUK 06-12-2013 06:06 PM

Gonna cause me to "upgrade" my driveway, too. Damn you rolled curbs!!

Apex Motorsports 06-12-2013 06:18 PM

Quote:

Originally Posted by BalogUK (Post 6662439)
Gonna cause me to "upgrade" my driveway, too. Damn you rolled curbs!!

I have the same problem in my subdivision. Check out Bridjit Curb Ramps. And thanks for your order!

BalogUK 06-12-2013 06:42 PM

Exactly my plan, Chase been stalking Amazon all week as they cycle the price up and down. Gives me time to order them as I just got the email from Victoria that the kits are out of stock!

BalogUK 06-14-2013 09:39 AM

Chase/Paul, does Pfadt drop-ship direct to me, or will they ship components to you and then you subsequently ship the full kit to me?

According to Pfadt, the outstanding items are the endlinks

BalogUK 07-03-2013 08:45 PM

Still waiting for Pfadt to get all the components ready....3weeks and counting. Anyone else waiting for ZL stage 2 kit?

Happy 4th everyone!

Fast6.3 07-04-2013 11:54 AM

Im waiting on endlinks

HaulnSS 07-04-2013 11:58 AM

Still waiting on mine. Been a few weeks.

Rjgreen2 07-05-2013 08:07 AM

I got the Stage 3, everything is on its way except the endlinks and sway bar, its getting powder coated.

BalogUK 07-05-2013 09:00 AM

Quote:

Originally Posted by Rjgreen2 (Post 6752958)
I got the Stage 3, everything is on its way except the endlinks and sway bar, its getting powder coated.

Same as I've been told... But it should be done by now. Endlinks were drop forged a couple weeks ago and bars should've been back from the coater by now.... :frusty:

BalogUK 07-05-2013 06:25 PM

Update:

So much for anything being on its way... Pfadt says middle of July at least before package will be ready to ship. Still can't get a clear answer as to what the "latest" parts delay is. But is what it is. No speeding it up.
I truly appreciate that everything's made in-house-- that's how you ensure top quality-- but come on, if you know stock is low, move forward with production. Do you wait till you're on the side of the road, out of gas before deciding to get more, no! So WTF Pfadt?! Way to make my first experience with your company pretty damn &!>+y.
Total downer for the summer.

Justin

CHMSC 07-06-2013 01:58 PM

I feel your pain man. I ordered coil overs and camber plates at the end of May. Got the coilovers the next week but not the camber plates. I was told six weeks.....well here it is six weeks later and nada. Just asked for a refund since Pfadt told me they have no idea when they will be making them......now that is a WTF?

Ordered my ZL spec sways a few weeks ago and still don't have those. I was told this week they don't even have the bar stock to make the until next week. So I am hoping in a few weeks I will have them. NOT VERY IMPRESSED WITH PFADT RIGHT NOW!!

SPCBA 07-06-2013 06:18 PM

they are busy building headers apparently

alaskacamaro 07-07-2013 01:30 PM

Had PFADT ZL stage three package installed a few weeks ago. Without a doubt the most impressive modd I did to the car. Hard to put into words how much differently the car handles...

BalogUK 07-08-2013 08:05 AM

Quote:

Originally Posted by CHMSC (Post 6756906)
I feel your pain man. I ordered coil overs and camber plates at the end of May. Got the coilovers the next week but not the camber plates. I was told six weeks.....well here it is six weeks later and nada. Just asked for a refund since Pfadt told me they have no idea when they will be making them......now that is a WTF?

Ordered my ZL spec sways a few weeks ago and still don't have those. I was told this week they don't even have the bar stock to make the until next week. So I am hoping in a few weeks I will have them. NOT VERY IMPRESSED WITH PFADT RIGHT NOW!!

Hmm no bar stock...well that's troubling. I guess it's all been lies about the bars being at the powder coater for the past two weeks. They need to get their story straight with a number of orders outstanding.... :paddle:

Jim Burke 07-08-2013 03:17 PM

Yea I've been waiting about the same amount of time.

Kinda frustrating, especially because I was told they were supposed to be ready to ship last week. Now no one seems to know when they will ship


All times are GMT -5. The time now is 01:09 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.